Re: Forcedeth: Nvidia NIC goes up and down
From: jos.huisken
Date: Wed Aug 22 2007 - 16:49:19 EST
Hi,
I have a similar issue. The network drops away randomly for short periods (several to ten(s) seconds).
Strange enough nothing is reported is syslog, and indeed from the machine itself pinging works perfectly to another machine.
>From that other machine however the connections looks dead in those periods...
I'm running kernel 2.6.18.8-0.5-default on a SUSE 10.2 machine with a ASUS M2NPV-VM board.
Have tried both the default "0.59" and "0.62-Driver Package V1.23" version of forcedeth
Tried 2 BIOSes: 0901 and 1001.
Also have tried several kernel options independently: noapic, pci=routeirq, acpi=off, pci=nomsi
All did not help.
Any suggestions?
BTW I'm not subscribed, please CC me personally.
Thanks in advance,
-- Jos
00:14.0 Ethernet controller: nVidia Corporation MCP51 Ethernet Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 816a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Link detected: yes
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/