The patch was 4/4 of course. :-<
Probably I was too esctatic about the code. ;-)
The Marvell bridge chips used on HighPoint SATA cards do not seem to support
the MWDMA modes (at least that caould be seen in their so-called drivers :-),
so the driver needs to account for this -- to achieve this:
- add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz
with his consent, also adding the method callout to ide_rate_filter();
- installed the method for all chips to only return empty mask if a SATA drive
is detected onHPT372{AN]/374 chips...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
This patch against the current Linus' tree and unfortunately I was able to only
compile test it since that tree gives MODPOST warning and dies early on bootup.
Will hopefully try to test if/when I have time... :-)
Index: linux-2.6/drivers/ide/pci/hpt366.c
===================================================================
--- linux-2.6.orig/drivers/ide/pci/hpt366.c
+++ linux-2.6/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.12 Aug 25, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.13 Aug 22, 2007
Errr... and version shuold Aug 02 -- thought I've fixed that. :-/