[PATCH v2] Move the definition of pr_err() into kernel.h

From: Emil Medve
Date: Tue Sep 11 2007 - 14:25:32 EST


Other pr_*() macros are already defined in kernel.h, but pr_err() was defined
multiple times in several other places

Signed-off-by: Emil Medve <Emilian.Medve@xxxxxxxxxxxxx>
---

I'm writing a driver and I've been using the pr_*() macros from kernel.h and I
was surprised not to find there pr_err() but defined multiple times (in four
different files). I didn't want to define it yet one more time so I did this
cleanup

This patch is against Linus' tree v2.6.23-rc6 (0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01)

linux-2.6> scripts/checkpatch.pl 0001-Move-the-definition-of-pr_err-into-kernel.h.patch
Your patch has no obvious style problems and is ready for submission.

drivers/i2c/chips/menelaus.c | 10 ++++------
drivers/net/spider_net.h | 3 ---
drivers/video/omap/lcd_h3.c | 6 ++----
drivers/video/omap/lcd_inn1610.c | 6 ++----
include/linux/kernel.h | 2 ++
5 files changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index d9c92c5..66436ba 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,8 +49,6 @@

#define DRIVER_NAME "menelaus"

-#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
-
#define MENELAUS_I2C_ADDRESS 0x72

#define MENELAUS_REV 0x01
@@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);

if (val < 0) {
- pr_err("write error");
+ pr_err(DRIVER_NAME ": write error");
return val;
}

@@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);

if (val < 0)
- pr_err("read error");
+ pr_err(DRIVER_NAME ": read error");

return val;
}
@@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
- pr_err("device not found");
+ pr_err(DRIVER_NAME ": device not found");
err = -ENODEV;
goto fail1;
}
@@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)

res = i2c_add_driver(&menelaus_i2c_driver);
if (res < 0) {
- pr_err("driver registration failed\n");
+ pr_err(DRIVER_NAME ": driver registration failed\n");
return res;
}

diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index dbbdb8c..c67b11d 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -493,7 +493,4 @@ struct spider_net_card {
struct spider_net_descr darray[0];
};

-#define pr_err(fmt,arg...) \
- printk(KERN_ERR fmt ,##arg)
-
#endif
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 51807b4..c604d93 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -28,8 +28,6 @@

#define MODULE_NAME "omapfb-lcd_h3"

-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
@@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
- pr_err("Unable to turn on LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");

return r;
}
@@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
- pr_err("Unable to turn off LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}

static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 95604ca..5ef119c 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -27,20 +27,18 @@

#define MODULE_NAME "omapfb-lcd_h3"

-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
int r = 0;

if (omap_request_gpio(14)) {
- pr_err("can't request GPIO 14\n");
+ pr_err(MODULE_NAME ": can't request GPIO 14\n");
r = -1;
goto exit;
}
if (omap_request_gpio(15)) {
- pr_err("can't request GPIO 15\n");
+ pr_err(MODULE_NAME ": can't request GPIO 15\n");
omap_free_gpio(14);
r = -1;
goto exit;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f592df7..c51936a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -242,6 +242,8 @@ static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *

#define pr_info(fmt,arg...) \
printk(KERN_INFO fmt,##arg)
+#define pr_err(fmt, arg...) \
+ printk(KERN_ERR fmt, ##arg)

/*
* Display an IP address in readable format.
--
1.5.3.GIT

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/