Re: sata_nv issues with MCP51 SATA controller

[Jon Ivar Rykkelid]

Hi,

To eliminate the possibility of this being a hardware issue, I have now 
acquired another "Gigabyte GA-N650SLI-DS4" motherboard (with the "MCP51" 
chipset) for testing. I'll swap parts this evening. Hopefully I'll be 
able to tell you in a few hours whether this appears to be working as it 
should. The motherboard that I'm going to swap to has actually been 
tested (with MS Windows OS+driver) for more than a day with a disk 
connected, so if this MB also fails, I think it will be safe to say that 
the issue is with the sata_nv driver... So hang on.

(You can't think of something else that could conflict with the sata_nv 
driver after a bit of time, like two of my raid-disks being encrypted, 
me running a SW raid-5 array / some special HW (quad-core CPU) / me 
running vmware on this server ... ? - To me, all these suggestions seems 
rather far fetched, especially as all is working with another 
controller, so I'm arguing that unless there's a HW issue, the issue is 
with the driver, but you're the expert(s), so let me know if you differ.)

I'll keep you posted as to the result of swapping HW.. Give me a few 
hours.  :-)

BR
Jon Ivar

Robert Hancock wrote:
> Jeff Garzik wrote:
> > Jon Ivar Rykkelid wrote:
> > > Hi,
> > >
> > > I now tested with the adma=0 option, but if anything I got a crash 
> > > quicker than before. Same error message started coming in, but this 
> > > time the system hung before I was able to capture the log as well 
> > > (but I saw the error, and it was the same as before, except that 
> > > this time it was the ata3-channel that first started acting up..) - 
> > > To remind you all what this is about, I have reattached the log that 
> > > I originally captured...
> >
> > Sounds like a hardware problem, since disabling ADMA is generally the 
> > cure-all we use -- it appears to stress the hardware less.
>
> If this is an MCP51 chipset, adma=0 will make no difference since that 
> chipset does not support ADMA in the first place.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/