Query about Bio submission / Direct IO

[Shreyansh Jain]

Hi List,

I have tried this on kernelnewbies
<http://article.gmane.org/gmane.linux.kernel.kernelnewbies/23166> but it seems 
I am not good at explaining well. trying here again.

Question:
Is there a limitation (some kind of caveat) when direct IO pages are added to 
a bio (multiple pages per bio) and if the total length or offset of some of 
the vectors is not aligned (PAGE_SIZE or sector size)?

My scenario:
1. I have a filesystem in which I create bio for submission to a SCSI disk 
   connected in a SAN via a FC switch. 
2. This is a direct IO request where in multiple pages are being added in a bio
   (bio_map_user). Also, as the user buffer I get is unaligned, I am changing
    bio's first vector offset (as well as len, bi_size accordingly).

What I observe is:

1. IO is performed perfectly (as expected) in case there are no SCSI failure.
   end_bio gets called as expected and the user app is happy.
2. In case I  disconnect the SCSI device from switch, my end_bio function 
   keeps on getting sub-completion bio (bi_size > 0 and uptodate cleared,
   error set to -5).
3. For capturing and ignoring sub-completion returns from block layer, 
   using other kernel end_bio implementation as example I had a code like

    if(bio->bi_size > 0)
       return 1;

   as the starting lines of the end_bio routine. Thus, my user space goes off 
   to disk sleep and kernel log keeps on spweing messages like 

...
Oct 17 21:56:07 mgs02 kernel: end_request: I/O error, dev sdl, sector 33639
Oct 17 21:56:07 mgs02 kernel: sd 2:0:0:8: SCSI error: return code = 0x10000
Oct 17 21:56:07 mgs02 kernel: end_request: I/O error, dev sdl, sector 33639
Oct 17 21:56:07 mgs02 kernel: sd 2:0:0:8: SCSI error: return code = 0x10000
Oct 17 21:56:07 mgs02 kernel: end_request: I/O error, dev sdl, sector 33639
...

till i connect the switch back - even if that is one hour after disconnecting it.

Best part - it works amazingly well in case I keep the offset of the first page
aligned (somehow, at expense of corrupted data copy) - failure of SCSI disk
(end_bio returns, bi_size=0, my code captures error) or no failure.

I have tried this on 2.6.5 and 2.6.16.27 (I agree they are old, but that is 
what I have to work  on :( ). It is a qlogic SCSI HBA. I have created the bio
 just like other kernel subsystems do.

Only thing I am not sure is whether there is something special that needs to 
be done in case of direct IO which I am missing.

biodoc.txt states that:
"Note: Right now the only user of bios with more than one page is ll_rw_kio,
 which in turn means that only raw I/O uses it (direct i/o may not work right
 now)."

Any idea why it doesn't work (though I am expecting that this doc is 2.6
starting era and things might have changed a lot now).

Any help would be highly appreciated. Apologies if my channel of approach is
wrong and if this post is huge (couldn't keep it shorter than this).

Shreyansh


[PS: Is this situation something to do with request flags REQ_PC /
REQ_BLOCK_PC?? While searching code, I found these somewhere connected to 
direct IO (bio_add_pc_page) and could find more about them]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/