[PATCH] dz: Update Kconfig description
From: Maciej W. Rozycki
Date: Fri Oct 19 2007 - 16:35:00 EST
Reformat the Kconfig entries and update descriptions for accuracy.
Select the driver by default for configurations of interest. For the
curious: 32BIT means only 32-bit DECstations support the device, not that
the driver is not 64-bit clean; I have not checked that either though.
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx>
---
Please apply,
Maciej
patch-mips-2.6.18-20060920-dz-kconfig-2
diff -up --recursive --new-file linux-mips-2.6.18-20060920.macro/drivers/serial/Kconfig linux-mips-2.6.18-20060920/drivers/serial/Kconfig
--- linux-mips-2.6.18-20060920.macro/drivers/serial/Kconfig 2006-06-29 05:03:07.000000000 +0000
+++ linux-mips-2.6.18-20060920/drivers/serial/Kconfig 2007-02-04 20:18:36.000000000 +0000
@@ -385,20 +385,24 @@ config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
select SERIAL_CORE
- help
- DZ11-family serial controllers for VAXstations, including the
- DC7085, M7814, and M7819.
+ default y
+ ---help---
+ DZ11-family serial controllers for DECstations and VAXstations,
+ including the DC7085, M7814, and M7819.
config SERIAL_DZ_CONSOLE
bool "Support console on DECstation DZ serial driver"
depends on SERIAL_DZ=y
select SERIAL_CORE_CONSOLE
- help
+ default y
+ ---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
- mode). Note that the firmware uses ttyS0 as the serial console on
- the Maxine and ttyS2 on the others.
+ mode).
+
+ Note that the firmware uses ttyS3 as the serial console on
+ DECstations that use this driver.
If unsure, say Y.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/