Re: [HP ProLiant WatchDog driver] hpwdt HP WatchDog Patch <resend>

[Bjorn Helgaas]

On Monday 22 October 2007 05:09:51 pm thomas.mingarelli@xxxxxx wrote:
> +config HP_WATCHDOG
> +        tristate "Hewlett-Packard watchdog"
> +        depends on WATCHDOG && X86

I wouldn't be surprised if this device someday turned up on non-x86
systems.  I know there's some x86 firmware stuff in there that clearly
requires x86.  But it'd be nice if the rest of the driver compiled and
worked (minus the x86 firmware functionality) on other architectures.
For example, you could wrap all the event logging code in "#ifdef
CONFIG_X86" and provide a null implementation for !X86.

> +asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
> +			       unsigned long *pRomEntry)
> +{
> +#ifdef CONFIG_X86_64
> +	asm("pushq      %rbp            \n\t"
> +	    "movq       %rsp, %rbp      \n\t"
> +	    "pushq      %rax            \n\t"
> +	    "pushq      %rbx            \n\t"
> +	    "pushq      %rdx            \n\t"
> +	    "pushq      %r12            \n\t"
> +	    "pushq      %r9             \n\t"
> +	    "movq       %rsi, %r12      \n\t"
> +	    "movq       %rdi, %r9       \n\t"
> +	    "movl       4(%r9),%ebx     \n\t"
> +	    "movl       8(%r9),%ecx     \n\t"
> +	    "movl       12(%r9),%edx    \n\t"
> +	    "movl       16(%r9),%esi    \n\t"
> +	    "movl       20(%r9),%edi    \n\t"
> +	    "movl       (%r9),%eax      \n\t"
> +	    "call       *%r12           \n\t"
> +	    "pushfq                     \n\t"
> +	    "popq        %r12           \n\t"
> +	    "popfq                      \n\t"
> +	    "movl       %eax, (%r9)     \n\t"
> +	    "movl       %ebx, 4(%r9)    \n\t"
> +	    "movl       %ecx, 8(%r9)    \n\t"
> +	    "movl       %edx, 12(%r9)   \n\t"
> +	    "movl       %esi, 16(%r9)   \n\t"
> +	    "movl       %edi, 20(%r9)   \n\t"
> +	    "movq       %r12, %rax      \n\t"
> +	    "movl       %eax, 28(%r9)   \n\t"
> +	    "popq       %r9             \n\t"
> +	    "popq       %r12            \n\t"
> +	    "popq       %rdx            \n\t"
> +	    "popq       %rbx            \n\t"
> +	    "popq       %rax            \n\t"
> +	    "leave                      \n\t" "ret");
> +#endif

This is more dangerous than using the gcc assembler operand
syntax, because it assumes things about how the parameters are
put on the stack.

> +static int __devinit hpwdt_init_one(struct pci_dev *dev,
> +				    const struct pci_device_id *ent)
> +{
> +	int retval;
> +
> +	if (pci_enable_device(dev)) {
> +		printk(KERN_WARNING
> +		       "hpwdt: Not possible to enable PCI Device\n");

You might consider using dev_printk(), dev_warn(), etc, instead of most
of your printk calls.  Then you get the device ID and driver name
automatically.

> +		return -ENODEV;
> +	}
> +	pci_enable = 1;

The driver assumes only a single instance of the device.  But PCI being
what it is, it's often possible to have multiple cards, so you might
want some protection in case you trip over more than one.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/