[PATCH 2.6.24-rc1] serial: Fix serial_txx9 console initialization

[Atsushi Nemoto]

Since commit 97d97224ff361e08777fb33e0fd193ca877dac28, serial_core
calls ->pm() on initialization even if the port was used for console.
This behaviour breaks serial_txx9 console since The serial_txx9 driver
initialize its port entirely on its ->pm() method if new state was 0.
This patch adds checking for oldstate value to fix this probelm.

Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
---
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 6846a6c..7ad2192 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -657,7 +657,15 @@ static void
 serial_txx9_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
-	if (state == 0)
+	/*
+	 * If oldstate was -1 this is called from
+	 * uart_configure_port().  In this case do not initialize the
+	 * port now, because the port was already initialized (for
+	 * non-console port) or should not be initialized here (for
+	 * console port).  If we initialized the port here we lose
+	 * serial console settings.
+	 */
+	if (state == 0 && oldstate != -1)
 		serial_txx9_initialize(port);
 }

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/