Dynticks Causing High Context Switch Rate in ksoftirqd

[bdupree]

Question: Why is ksoftirqd eating about 5 to 10 percent of my CPU on an idle
system? The problem occurs if I config the kernel with tickless
support (i.e. CONFIG_TICK_ONESHOT=y).  (Thanks to "oprofile" for putting me
onto this.)

I have noted this same problem on kernel versions: 2.6.23.1, 2.6.23.8 and
2.6.23.9

**************************************************************************
*** Output from "vmstat -n 1 10" -- Note very high context switch rate ***
*** This is on a idle machine!                                         ***
**************************************************************************

procs -----------memory---------- ---swap-- -----io---- --system--
----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy
id wa
 0  0      0 1925556   4768 116104    0    0   124     2    6  7538  1  2
96  1
 0  0      0 1925556   4768 116104    0    0     0     0    2 147329  0  1
99  0
 0  0      0 1925548   4768 116104    0    0     0     0    0 154515  0  1
99  0
 0  0      0 1925548   4768 116104    0    0     0     0    1 153898  0  2
98  0
 0  0      0 1925548   4780 116104    0    0     0    16    3 155216  0  1
99  0
 0  0      0 1925548   4780 116104    0    0     0     0    1 161718  0  1
99  0
 0  0      0 1925548   4780 116104    0    0     0     0    0 147587  0  2
98  0
 0  0      0 1925548   4780 116104    0    0     0     0    1 153524  0  2
98  0
 0  0      0 1925448   4780 116104    0    0     0     0    0 153434  0  1
99  0
 0  0      0 1925448   4792 116092    0    0     0    16    4 153527  0  2
98  0

********************
*** System Stats ***
********************

 Distro: Slackware 10.2
 Mobo:   MSI MasterX FA6R E7210
 CPUs:   Dual 2.4 GHz P4 Xeons 400 MHz FSB - Hyperthreading enabled
 Mem:    2 GB ECC DDR PC 266


******************
*** PCI Config ***
******************

00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub
(rev 02)
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA
Bridge (rev 02)
00:06.0 System peripheral: Intel Corporation 82875P/E7210 Processor to I/O
Memory Interface (rev 02)
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt
Controller (rev 02)
00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
(rev 02)
00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller
(rev 02)
00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
01:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet
Controller
02:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
03:09.0 Mass storage controller: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller (rev 02)
03:0a.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet
Controller
03:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/