Re: [BUG] 2.6.24-rc3-git2 softlockup detected
From: Andrew Morton
Date: Wed Nov 28 2007 - 02:31:42 EST
On Wed, 28 Nov 2007 12:47:19 +0530 Kamalesh Babulal <kamalesh@xxxxxxxxxxxxxxxxxx> wrote:
> Andrew Morton wrote:
> > On Wed, 28 Nov 2007 11:59:00 +0530 Kamalesh Babulal <kamalesh@xxxxxxxxxxxxxxxxxx> wrote:
> >
> >> Hi,
> >
> > (cc linux-scsi, for sym53c8xx)
> >
> >> Soft lockup is detected while bootup with 2.6.24-rc3-git2 on powerbox
> >
> > I assume this is a post-2.6.23 regression?
> >
> >> BUG: soft lockup - CPU#1 stuck for 11s! [insmod:375]
> >> NIP: c00000000002f02c LR: d0000000001414fc CTR: c00000000002f018
> >> REGS: c00000077cbef0b0 TRAP: 0901 Not tainted (2.6.24-rc3-git2-autotest)
> >> MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24022088 XER: 00000000
> >> TASK = c00000077cbd8000[375] 'insmod' THREAD: c00000077cbec000 CPU: 1
> >> GPR00: d0000000001414fc c00000077cbef330 c00000000052b930 d000080080002014
> >> GPR04: d00008008000202c 0000000000000000 c00000077ca1cb00 d00000000014ce54
> >> GPR08: c00000077ca1c63c 0000000000000000 000000000000002a c00000000002f018
> >> GPR12: d000000000143610 c000000000473d00
> >> NIP [c00000000002f02c] .ioread8+0x14/0x60
> >> LR [d0000000001414fc] .sym_hcb_attach+0x1188/0x1378 [sym53c8xx]
> >> Call Trace:
> >> [c00000077cbef330] [c00000077cbef3c0] 0xc00000077cbef3c0 (unreliable)
> >> [c00000077cbef3a0] [d0000000001414fc] .sym_hcb_attach+0x1188/0x1378 [sym53c8xx]
> >> [c00000077cbef470] [d0000000001395f8] .sym2_probe+0x700/0x99c [sym53c8xx]
> >> [c00000077cbef710] [c0000000001bc118] .pci_device_probe+0x124/0x1b0
> >> [c00000077cbef7b0] [c000000000221138] .driver_probe_device+0x144/0x20c
> >> [c00000077cbef850] [c000000000221450] .__driver_attach+0xcc/0x154
> >> [c00000077cbef8e0] [c00000000021ff94] .bus_for_each_dev+0x7c/0xd4
> >> [c00000077cbef9a0] [c000000000220e9c] .driver_attach+0x28/0x40
> >> [c00000077cbefa20] [c0000000002204d8] .bus_add_driver+0x90/0x228
> >> [c00000077cbefac0] [c000000000221858] .driver_register+0x94/0xb0
> >> [c00000077cbefb40] [c0000000001bc430] .__pci_register_driver+0x6c/0xcc
> >> [c00000077cbefbe0] [d000000000143428] .sym2_init+0x108/0x15b0 [sym53c8xx]
> >> [c00000077cbefc80] [c00000000008ce80] .sys_init_module+0x17c4/0x1958
> >> [c00000077cbefe30] [c00000000000872c] syscall_exit+0x0/0x40
> >> Instruction dump:
> >> 60000000 786b0420 38210070 7d635b78 e8010010 7c0803a6 4e800020 7c0802a6
> >> f8010010 f821ff91 7c0004ac 89230000 <0c090000> 4c00012c 79290620 2f8900ff
> >
> > I see no obvious lockup sites near the end of sym_hcb_attach(). Maybe it's
> > being called lots of times from a higher level.. Do the traces all look
> > the same?
>
> Hi Andrew,
>
> I see this call trace twice and both looks similar and on another reboot
> the following trace is seen twice in different cpu
>
> BUG: soft lockup detected on CPU#3!
> Call Trace:
> [C00000003FEDEDA0] [C000000000010220] .show_stack+0x68/0x1b0 (unreliable)
> [C00000003FEDEE40] [C0000000000A061C] .softlockup_tick+0xf0/0x13c
> [C00000003FEDEEF0] [C000000000072E2C] .run_local_timers+0x1c/0x30
> [C00000003FEDEF70] [C000000000022FA0] .timer_interrupt+0xa8/0x488
> [C00000003FEDF050] [C0000000000034EC] decrementer_common+0xec/0x100
> --- Exception: 901 at .ioread8+0x14/0x60
> LR = .sym_hcb_attach+0x1194/0x1384 [sym53c8xx]
> [C00000003FEDF340] [D0000000002B3BC0] 0xd0000000002b3bc0 (unreliable)
> [C00000003FEDF3B0] [D00000000029A3C0] .sym_hcb_attach+0x1194/0x1384 [sym53c8xx]
> [C00000003FEDF480] [D000000000291D30] .sym2_probe+0x75c/0x9f8 [sym53c8xx]
> [C00000003FEDF710] [C0000000001B65A4] .pci_device_probe+0x13c/0x1dc
> [C00000003FEDF7D0] [C000000000219A0C] .driver_probe_device+0xa0/0x15c
> [C00000003FEDF870] [C000000000219C64] .__driver_attach+0xb4/0x138
> [C00000003FEDF900] [C00000000021913C] .bus_for_each_dev+0x7c/0xd4
> [C00000003FEDF9C0] [C0000000002198B0] .driver_attach+0x28/0x40
> [C00000003FEDFA40] [C000000000218BA4] .bus_add_driver+0x98/0x18c
> [C00000003FEDFAE0] [C00000000021A064] .driver_register+0xa8/0xc4
> [C00000003FEDFB60] [C0000000001B68AC] .__pci_register_driver+0x5c/0xa4
> [C00000003FEDFBF0] [D00000000029C204] .sym2_init+0x104/0x1550 [sym53c8xx]
> [C00000003FEDFC90] [C00000000008D1F4] .sys_init_module+0x1764/0x1998
> [C00000003FEDFE30] [C00000000000869C] syscall_exit+0x0/0x40
>
hm, odd.
Can you look up sym_hcb_attach+0x1194/0x1384 in gdb? Something like
- Enable CONFIG_DEBUG_INFO
- gdb sym53c8xx.o
(gdb) p sym_hcb_attach
<prints 0xsomething>
(gdb) p/x 0xsomething + 0x1194
<prints 0xsomethingelse>
(gdb) l *0xsomethingelse
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/