Re: [PATCH] kexec: force x86_64 arches to boot kdump kernels on boot cpu

[Eric W. Biederman]

Vivek Goyal <vgoyal@xxxxxxxxxx> writes:

> Ok. Got it. So in this case we route the interrupts directly through LAPIC
> and put LVT0 in ExtInt mode and IOAPIC is bypassed.
>
> I am looking at Intel Multiprocessor specification v1.4 and as per figure
> 3-3 on page 3-9, 8259 is connected to LINTIN0 line, which in turn is 
> connected to LINTIN0 pin on all processors. If that is the case, even in
> this mode, all the CPU should see the timer interrupts (which is coming
> from 8259)?

However things are implemented completely differently now.  I don't think
the coherent hypertransport domain of AMD processors actually routes
ExtINT interrupts to all cpus but instead one (the default route?) is
picked.

So I think for the kdump case we pretty much need to use an IOAPIC
in virtual wire mode for recent AMD systems.

For current Intel systems I believe either scenario still works.

> Can you print the LAPIC registers (print_local_APIC) during normal boot
> and during kdump boot and paste here?

It's worth a look.

I still think we need to just use apic mode at kernel startup, and
be done with it.

Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/