Re: [patch 05/14] percpu: Use a Kconfig variable to configure archspecific percpu setup
From: Christoph Lameter
Date: Thu Nov 29 2007 - 01:08:32 EST
Here is the first of two patches for x86_64 that move the pda into the per
cpu area and then make the x86 percpu macros work for x86_64. This needs
to be generalized for other arches. The __per_cpu_start offsets can be
taken care of by the linker. We can also tell the linker to completely
relocate the percpu area to 0.
X86_64: Declare pda as per cpu data thereby moving it into the cpu area
Declare the pda as a per cpu variable. This will have the effect of moving
the pda data into the cpu area managed by cpu alloc.
The boot_pdas are only needed in head64.c so move the declaration
over there and make it static.
Remove the code that allocates special pda data structures.
The pda is moved to the beginning of the per cpu area. gs is pointing to the
pda. And therefore gs: is now pointing to the per cpu area of the current
processor. A per cpu variable can then be reached at
%gs:[&per_cpu_xxxx - __per_cpu_start]
Signed-off-by: Christoph Lameter <clameter@xxxxxxx>
---
arch/x86/kernel/head64.c | 6 ++++++
arch/x86/kernel/setup64.c | 13 ++++++++++---
arch/x86/kernel/smpboot_64.c | 16 ----------------
include/asm-generic/vmlinux.lds.h | 1 +
include/asm-x86/pda.h | 1 -
include/linux/percpu.h | 4 ++++
6 files changed, 21 insertions(+), 20 deletions(-)
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/setup64.c 2007-11-28 20:59:13.124188194 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c 2007-11-28 21:08:50.473347382 -0800
@@ -30,7 +30,9 @@ cpumask_t cpu_initialized __cpuinitdata
struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
+DEFINE_PER_CPU_FIRST(struct x8664_pda, pda);
+EXPORT_PER_CPU_SYMBOL(pda);
struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
@@ -109,10 +111,15 @@ void __init setup_per_cpu_areas(void)
}
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
- cpu_pda(i)->data_offset = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+ /* Relocate the pda */
+ memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
+ cpu_pda(i) = (struct x8664_pda *)ptr;
+ cpu_pda(i)->data_offset = ptr - __per_cpu_start;
}
-}
+ /* Fix up pda for this processor .... */
+ pda_init(0);
+}
void pda_init(int cpu)
{
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/smpboot_64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/smpboot_64.c 2007-11-28 20:59:13.136188167 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/smpboot_64.c 2007-11-28 20:59:35.399937395 -0800
@@ -556,22 +556,6 @@ static int __cpuinit do_boot_cpu(int cpu
return -1;
}
- /* Allocate node local memory for AP pdas */
- if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
- struct x8664_pda *newpda, *pda;
- int node = cpu_to_node(cpu);
- pda = cpu_pda(cpu);
- newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
- node);
- if (newpda) {
- memcpy(newpda, pda, sizeof (struct x8664_pda));
- cpu_pda(cpu) = newpda;
- } else
- printk(KERN_ERR
- "Could not allocate node local PDA for CPU %d on node %d\n",
- cpu, node);
- }
-
alternatives_smp_switch(1);
c_idle.idle = get_idle_for_cpu(cpu);
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/head64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/head64.c 2007-11-28 20:59:13.152187359 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/head64.c 2007-11-28 20:59:35.403937534 -0800
@@ -22,6 +22,12 @@
#include <asm/sections.h>
#include <asm/kdebug.h>
+/*
+ * Only used before the per cpu areas are setup. The use for the non possible
+ * cpus continues after boot
+ */
+static struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
static void __init zap_identity_mappings(void)
{
pgd_t *pgd = pgd_offset_k(0UL);
Index: linux-2.6.24-rc3-mm2/include/asm-x86/pda.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-x86/pda.h 2007-11-28 20:59:13.164187921 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-x86/pda.h 2007-11-28 20:59:35.403937534 -0800
@@ -39,7 +39,6 @@ struct x8664_pda {
} ____cacheline_aligned_in_smp;
extern struct x8664_pda *_cpu_pda[];
-extern struct x8664_pda boot_cpu_pda[];
extern void pda_init(int);
#define cpu_pda(i) (_cpu_pda[i])
Index: linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-generic/vmlinux.lds.h 2007-11-28 20:59:13.176187886 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h 2007-11-28 20:59:35.403937534 -0800
@@ -259,6 +259,7 @@
. = ALIGN(align); \
__per_cpu_start = .; \
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
+ *(.data.percpu.first) \
*(.data.percpu) \
*(.data.percpu.shared_aligned) \
} \
Index: linux-2.6.24-rc3-mm2/include/linux/percpu.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/linux/percpu.h 2007-11-28 20:59:13.188187940 -0800
+++ linux-2.6.24-rc3-mm2/include/linux/percpu.h 2007-11-28 21:09:23.399307556 -0800
@@ -23,6 +23,10 @@
DEFINE_PER_CPU(type, name)
#endif
+#define DEFINE_PER_CPU_FIRST(type, name) \
+ __attribute__((__section__(".data.percpu.first"))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/