Re: [PATCH PREEMPT_RT]: On AT91 ARM: GPIO Interrupt handling can/will stall forever

[Russell King - ARM Linux]

On Wed, Nov 28, 2007 at 03:19:14PM -0800, Daniel Walker wrote:
> On Wed, 2007-11-28 at 23:03 +0000, Russell King - ARM Linux wrote:
> > On Wed, Nov 28, 2007 at 04:13:07PM -0500, Steven Rostedt wrote:
> > > 
> > > 
> > > On Wed, 28 Nov 2007, Daniel Walker wrote:
> > > 
> > > >
> > > > Ignoring the ARM side of things for a sec, handle_simple_irq() will
> > > > mask() the interrupt in the special case that an interrupt is already in
> > > > the processes of being handled.. handle_simple_irq() also unmasks when
> > > > it finishes handling an interrupt (something real time adds for some
> > > > reason) ..
> > > >
> > > > In terms of threading the irq everything is the same except there is no
> > > > unmask() call when the thread finishes ..
> > > >
> > > 
> > > OK, to be honest, I never fully understood the concept of this
> > > "simple_irq". I figured it was because of the ARM architecture.
> > 
> > If you read what I said compared with what Daniel said, you'll see that
> > adding the mask/unmask is _pointless_ because for the case where the
> > simple handler should be used, there is _no_ hardware masking available
> > except via the parent interrupt signal.
> > 
> > So actually Daniel's argument misses the basic point - that using
> > handle_simple_irq for non-simple IRQs is just WRONG.
> 
> Well we've got at least two ARM boards which need the additional unmask
> to work correctly with interrupt threading .. So there must be at least
> two ARM boards using handle_simple_irq incorrectly .. It sounds like you
> would prefer we send patches to move those handle_simple_irq users into
> another method ?

If you read my explaination of the purpose of handle_simple_irq() you'll
see that for the _correct_ case where this handler should be used, the
mask and unmask can only be empty.  To repeat for the third time - it's
for the case where the hardware supplies NO way to mask the interrupt.

So adding calls to the mask/unmask methods would be pointless for the
correct use case.

If you do have the ability to mask, then you should be using the level or
edge handlers.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/