Re: constant_tsc and TSC unstable
From: Frans Pop
Date: Thu Nov 29 2007 - 19:30:38 EST
Paul Rolland wrote:
> Total of 2 processors activated (6919.15 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization [CPU#0 -> CPU#1]:
> Measured 3978592228 cycles TSC warp between CPUs, turning off TSC clock.
> Marking TSC unstable due to: check_tsc_sync_source failed.
> Brought up 2 CPUs
> ...
Not sure if this is related, but thought I'd contribute it anyway...
I've got a Pentium D system (dual core, single processor) and I on some
boots I get "Marking TSC unstable due to check_tsc_sync_source failed" with
some cycles warp between CPUs, while most boots are OK. This kind of
inconsistency seems more due to a failure in the kernel to deal with
differences between boots than with something inherent to the hardware.
I conclude that because basically I never have any problems with the system
once it has booted and the TSC has passed.
>From my kern.logs since Okt 26, I get the following data:
2.6.23+cfs: 2 passes
2.6.23.1: 1 pass; 1 failure (48 cycles warp)
2.6.24-rc1: 15 passes
2.6.24-rc2: 13 passes; 1 failure (8 cycles warp)
2.6.24-rc3: 5 passes; 3 failures (8, 8 and 16 cycles warp)
Note that this is not a new issue. For 2.6.21/2.6.23-RCx kernels I reported
similar data in http://lkml.org/lkml/2007/9/16/45.
Cheers,
FJP
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/