Re: 2.6.24-rc3-git6: Reported regressions from 2.6.23
From: Bartlomiej Zolnierkiewicz
Date: Sat Dec 01 2007 - 21:41:41 EST
On Saturday 01 December 2007, Rafael J. Wysocki wrote:
> Subject : 2.6.24-rc1: pata_amd fails to detect 80-pin wire
> Submitter : "Thomas Lindroth" <thomas.lindroth@xxxxxxxxx>
> References : http://lkml.org/lkml/2007/11/7/152
> http://bugzilla.kernel.org/show_bug.cgi?id=9322
> Handled-By : Tejun Heo <htejun@xxxxxxxxx>
> Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> Patch : http://lkml.org/lkml/2007/11/11/115
Tejun's rework of cable detection code which fixes the problem has
been just applied into "upstream" (not "upstream-fixes") so it is
destined for 2.6.25 (I wasn't on cc: BTW) and since I got no feedback
on my patch (below) which also happens to fix the regression, was
acked by Alan, tested by Thomas and has been in -mm for 3 weeks now
I assume that everybody is happy with it (Jeff/Tejun: you were also
on cc: when the patch was merged into -mm)...
Linus, please apply.
[PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings
* Don't program UDMA timings when programming PIO or MWDMA modes.
This has also a nice side-effect of fixing regression added by commit
681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of
SRST reset sequences") (->set_piomode method for PIO0 is called before
->cable_detect method which checks UDMA timings to get the cable type).
* Bump driver version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Tested-by: "Thomas Lindroth" <thomas.lindroth@xxxxxxxxx>
Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Cc: Tejun Heo <htejun@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ata/pata_amd.c | 5 +++--
drivers/ata/pata_via.c | 4 ++--
2 files changed, 5 insertions(+), 4 deletions(-)
Index: b/drivers/ata/pata_amd.c
===================================================================
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.3.10"
/**
* timing_setup - shared timing computation and load
@@ -115,7 +115,8 @@ static void timing_setup(struct ata_port
}
/* UDMA timing */
- pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
+ if (at.udma)
+ pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
}
/**
Index: b/drivers/ata/pata_via.c
===================================================================
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -63,7 +63,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -296,7 +296,7 @@ static void via_do_set_mode(struct ata_p
}
/* Set UDMA unless device is not UDMA capable */
- if (udma_type) {
+ if (udma_type && t.udma) {
u8 cable80_status;
/* Get 80-wire cable detection bit */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/