Re: [PATCH 3/3] net: wireless: bcm43xx: big_buffer_sem semaphore to mutex

[mvtodevnull]

On Dec 17, 2007 1:52 AM, Larry Finger <larry.finger@xxxxxxxxxxxx> wrote:
>
> One major difference between bcm43xx-SoftMAC and b43-mac80211 is that the former always used a fixed
> rate; whereas mac80211 tries to adjust the bit rate according to the transmission conditions.
> Perhaps it isn't working quite right in your case because of some peculiarity of your AP. IIRC, you
> have an 802.11b AP. If so, you will get the same bit speed behavior for mac80211 as for bcdm43xx by
> issuing a 'sudo iwconfig eth1 rate 11M' command.

I don't know what happened before, but after a reboot, I can't repeat
the 200 kB/s speed. It's back down to 40 kB/s, just like originally. I
didn't move the laptop, or the ap, the only thing I can think of that
might have changed is the noise level. FWIW, link quality is
consistently the same or better with b43.

Anyway, I'd noticed before that the bit rate starts at 1 Mb/s and
quickly scales to 11 Mb/s, but I tried setting it manually anyway and
didn't see any change. In fact, I set the rate to 5.5 Mb/s as well as
1 Mb/s and the download speed was the same with all three (around
30-40 kB/s).
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/