[PATCH] drivers/ata/: Spelling fixes
From: Joe Perches
Date: Mon Dec 17 2007 - 14:44:24 EST
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/ata/ata_piix.c | 2 +-
drivers/ata/libata-core.c | 4 ++--
drivers/ata/pata_at32.c | 2 +-
drivers/ata/pata_efar.c | 2 +-
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_sis.c | 4 ++--
6 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index bb62a58..ee51853 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -769,7 +769,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (is_slave) {
/* clear TIME1|IE1|PPE1|DTE1 */
master_data &= 0xff0f;
- /* Enable SITRE (seperate slave timing register) */
+ /* Enable SITRE (separate slave timing register) */
master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e4dea86..debbfc3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3065,7 +3065,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
/**
* ata_do_set_mode - Program timings and issue SET FEATURES - XFER
* @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
+ * @r_failed_dev: out parameter for failed device
*
* Standard implementation of the function used to tune and set
* ATA device disk transfer mode (PIO3, UDMA6, etc.). If
@@ -3173,7 +3173,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
+ * @r_failed_dev: out parameter for failed device
*
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
* ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 67e574d..db057b1 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- /* Setup struct containing private infomation */
+ /* Setup struct containing private information */
info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 043dcd3..dc33220 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
idetm_data &= 0xCC0F;
idetm_data |= (control << 4);
- /* Slave timing in seperate register */
+ /* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0x0F << shift;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 1eda821..e0c2cc2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
idetm_data &= 0xCC0F;
idetm_data |= (control << 4);
- /* Slave timing in seperate register */
+ /* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0xF0;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 87546d9..dc7e915 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higer bits are dependant on the device */
+ the higher bits are dependant on the device */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
@@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higer bits are dependant on the device, bit 15 udma */
+ the higher bits are dependant on the device, bit 15 udma */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
--
1.5.3.7.949.g2221a6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/