[PATCH 36/63] ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c
From: Bartlomiej Zolnierkiewicz
Date: Wed Dec 19 2007 - 20:43:28 EST
* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out
from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility.
* Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c.
ide-cd_verbose.c is IDE subsystem independent and may be easily converted
into generic library usable by other drivers (i.e. libata) if needed.
* Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig
replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by
default and visible only if CONFIG_EMBEDDED is defined.
before the patch:
text data bss dec hex filename
22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o
after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y:
text data bss dec hex filename
22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o
after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n:
text data bss dec hex filename
15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/Kconfig | 9 +
drivers/ide/Makefile | 4
drivers/ide/ide-cd.c | 124 --------------
drivers/ide/ide-cd.h | 237 ----------------------------
drivers/ide/ide-cd_verbose.c | 359 +++++++++++++++++++++++++++++++++++++++++++
5 files changed, 375 insertions(+), 358 deletions(-)
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -206,6 +206,15 @@ config BLK_DEV_IDECD
To compile this driver as a module, choose M here: the
module will be called ide-cd.
+config BLK_DEV_IDECD_VERBOSE_ERRORS
+ bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
+ depends on BLK_DEV_IDECD
+ default y
+ help
+ Turn this on to have the driver print out the meanings of the
+ ATAPI error codes. This will use up additional 8kB of kernel-space
+ memory, though.
+
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
depends on EXPERIMENTAL
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
+ide-cd_mod-y += ide-cd.o ide-cd_verbose.o
+
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -199,129 +199,8 @@ void cdrom_analyze_sense_data(ide_drive_
}
}
}
-#if VERBOSE_IDE_CD_ERRORS
- {
- int i;
- const char *s = "bad sense key!";
- char buf[80];
-
- printk(KERN_ERR "ATAPI device %s:\n", drive->name);
- if (sense->error_code == 0x70)
- printk(KERN_CONT " Error: ");
- else if (sense->error_code == 0x71)
- printk(" Deferred Error: ");
- else if (sense->error_code == 0x7f)
- printk(KERN_CONT " Vendor-specific Error: ");
- else
- printk(KERN_CONT " Unknown Error Type: ");
-
- if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
- s = sense_key_texts[sense->sense_key];
-
- printk(KERN_CONT "%s -- (Sense key=0x%02x)\n",
- s, sense->sense_key);
-
- if (sense->asc == 0x40) {
- sprintf(buf, "Diagnostic failure on component 0x%02x",
- sense->ascq);
- s = buf;
- } else {
- int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
- unsigned long key = (sense->sense_key << 16);
-
- key |= (sense->asc << 8);
- if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
- key |= sense->ascq;
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (sense_data_texts[mid].asc_ascq == key ||
- sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
- s = sense_data_texts[mid].text;
- break;
- } else if (sense_data_texts[mid].asc_ascq > key)
- hi = mid;
- else
- lo = mid + 1;
- }
- }
-
- if (s == NULL) {
- if (sense->asc > 0x80)
- s = "(vendor-specific error)";
- else
- s = "(reserved error code)";
- }
-
- printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
- s, sense->asc, sense->ascq);
-
- if (failed_command != NULL) {
- int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (packet_command_texts[mid].packet_command ==
- failed_command->cmd[0]) {
- s = packet_command_texts[mid].text;
- break;
- }
- if (packet_command_texts[mid].packet_command >
- failed_command->cmd[0])
- hi = mid;
- else
- lo = mid + 1;
- }
-
- printk(KERN_ERR " The failed \"%s\" packet command "
- "was: \n \"", s);
- for (i = 0; i < sizeof(failed_command->cmd); i++)
- printk(KERN_CONT "%02x ",
- failed_command->cmd[i]);
- printk(KERN_CONT "\"\n");
- }
-
- /* The SKSV bit specifies validity of the sense_key_specific
- * in the next two commands. It is bit 7 of the first byte.
- * In the case of NOT_READY, if SKSV is set the drive can
- * give us nice ETA readings.
- */
- if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
- int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
-
- printk(KERN_ERR " Command is %02d%% complete\n",
- progress / 0xffff);
- }
-
- if (sense->sense_key == ILLEGAL_REQUEST &&
- (sense->sks[0] & 0x80) != 0) {
- printk(KERN_ERR " Error in %s byte %d",
- (sense->sks[0] & 0x40) != 0 ?
- "command packet" : "command data",
- (sense->sks[1] << 8) + sense->sks[2]);
-
- if ((sense->sks[0] & 0x40) != 0)
- printk(KERN_CONT " bit %d",
- sense->sks[0] & 0x07);
-
- printk(KERN_CONT "\n");
- }
- }
-#else /* not VERBOSE_IDE_CD_ERRORS */
- /* Suppress printing unit attention and `in progress of becoming ready'
- errors when we're not being verbose. */
- if (sense->sense_key == UNIT_ATTENTION ||
- (sense->sense_key == NOT_READY && (sense->asc == 4 ||
- sense->asc == 0x3a)))
- return;
- printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
- "asc: 0x%02x ascq: 0x%02x\n",
- drive->name, sense->error_code, sense->sense_key,
- sense->asc, sense->ascq);
-#endif /* not VERBOSE_IDE_CD_ERRORS */
+ ide_cd_log_error(drive->name, failed_command, sense);
}
/*
@@ -3168,6 +3047,7 @@ static int __init ide_cdrom_init(void)
}
MODULE_ALIAS("ide:*m-cdrom*");
+MODULE_ALIAS("ide-cd");
module_init(ide_cdrom_init);
module_exit(ide_cdrom_exit);
MODULE_LICENSE("GPL");
Index: b/drivers/ide/ide-cd.h
===================================================================
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -10,14 +10,6 @@
#include <linux/cdrom.h>
#include <asm/byteorder.h>
-/* Turn this on to have the driver print out the meanings of the
- ATAPI error codes. This will use up additional kernel-space
- memory, though. */
-
-#ifndef VERBOSE_IDE_CD_ERRORS
-#define VERBOSE_IDE_CD_ERRORS 1
-#endif
-
/*
* typical timeout for packet command
*/
@@ -153,232 +145,7 @@ struct cdrom_info {
unsigned long write_timeout;
};
-/****************************************************************************
- * Descriptions of ATAPI error codes.
- */
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-#if VERBOSE_IDE_CD_ERRORS
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned short packet_command;
- const char * const text;
-} packet_command_texts[] = {
- { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
- { GPCMD_REQUEST_SENSE, "Request Sense" },
- { GPCMD_FORMAT_UNIT, "Format Unit" },
- { GPCMD_INQUIRY, "Inquiry" },
- { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
- { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
- { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
- { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
- { GPCMD_READ_10, "Read 10" },
- { GPCMD_WRITE_10, "Write 10" },
- { GPCMD_SEEK, "Seek" },
- { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
- { GPCMD_VERIFY_10, "Verify 10" },
- { GPCMD_FLUSH_CACHE, "Flush Cache" },
- { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
- { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
- { GPCMD_READ_HEADER, "Read Header" },
- { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
- { GPCMD_GET_CONFIGURATION, "Get Configuration" },
- { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
- { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
- { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
- "Get Event Status Notification" },
- { GPCMD_PAUSE_RESUME, "Pause/Resume" },
- { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
- { GPCMD_READ_DISC_INFO, "Read Disc Info" },
- { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
- { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
- { GPCMD_SEND_OPC, "Send OPC" },
- { GPCMD_MODE_SELECT_10, "Mode Select 10" },
- { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
- { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
- { GPCMD_CLOSE_TRACK, "Close Track" },
- { GPCMD_BLANK, "Blank" },
- { GPCMD_SEND_EVENT, "Send Event" },
- { GPCMD_SEND_KEY, "Send Key" },
- { GPCMD_REPORT_KEY, "Report Key" },
- { GPCMD_LOAD_UNLOAD, "Load/Unload" },
- { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
- { GPCMD_READ_12, "Read 12" },
- { GPCMD_GET_PERFORMANCE, "Get Performance" },
- { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
- { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
- { GPCMD_SET_STREAMING, "Set Streaming" },
- { GPCMD_READ_CD_MSF, "Read CD MSF" },
- { GPCMD_SCAN, "Scan" },
- { GPCMD_SET_SPEED, "Set Speed" },
- { GPCMD_PLAY_CD, "Play CD" },
- { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
- { GPCMD_READ_CD, "Read CD" },
-};
-
-/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const char * const sense_key_texts[16] = {
- "No sense data",
- "Recovered error",
- "Not ready",
- "Medium error",
- "Hardware error",
- "Illegal request",
- "Unit attention",
- "Data protect",
- "Blank check",
- "(reserved)",
- "(reserved)",
- "Aborted command",
- "(reserved)",
- "(reserved)",
- "Miscompare",
- "(reserved)",
-};
-
-/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned long asc_ascq;
- const char * const text;
-} sense_data_texts[] = {
- { 0x000000, "No additional sense information" },
- { 0x000011, "Play operation in progress" },
- { 0x000012, "Play operation paused" },
- { 0x000013, "Play operation successfully completed" },
- { 0x000014, "Play operation stopped due to error" },
- { 0x000015, "No current audio status to return" },
- { 0x010c0a, "Write error - padding blocks added" },
- { 0x011700, "Recovered data with no error correction applied" },
- { 0x011701, "Recovered data with retries" },
- { 0x011702, "Recovered data with positive head offset" },
- { 0x011703, "Recovered data with negative head offset" },
- { 0x011704, "Recovered data with retries and/or CIRC applied" },
- { 0x011705, "Recovered data using previous sector ID" },
- { 0x011800, "Recovered data with error correction applied" },
- { 0x011801, "Recovered data with error correction and retries applied"},
- { 0x011802, "Recovered data - the data was auto-reallocated" },
- { 0x011803, "Recovered data with CIRC" },
- { 0x011804, "Recovered data with L-EC" },
- { 0x015d00, "Failure prediction threshold exceeded"
- " - Predicted logical unit failure" },
- { 0x015d01, "Failure prediction threshold exceeded"
- " - Predicted media failure" },
- { 0x015dff, "Failure prediction threshold exceeded - False" },
- { 0x017301, "Power calibration area almost full" },
- { 0x020400, "Logical unit not ready - cause not reportable" },
- /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
- { 0x020401, "Logical unit not ready"
- " - in progress [sic] of becoming ready" },
- { 0x020402, "Logical unit not ready - initializing command required" },
- { 0x020403, "Logical unit not ready - manual intervention required" },
- { 0x020404, "Logical unit not ready - format in progress" },
- { 0x020407, "Logical unit not ready - operation in progress" },
- { 0x020408, "Logical unit not ready - long write in progress" },
- { 0x020600, "No reference position found (media may be upside down)" },
- { 0x023000, "Incompatible medium installed" },
- { 0x023a00, "Medium not present" },
- { 0x025300, "Media load or eject failed" },
- { 0x025700, "Unable to recover table of contents" },
- { 0x030300, "Peripheral device write fault" },
- { 0x030301, "No write current" },
- { 0x030302, "Excessive write errors" },
- { 0x030c00, "Write error" },
- { 0x030c01, "Write error - Recovered with auto reallocation" },
- { 0x030c02, "Write error - auto reallocation failed" },
- { 0x030c03, "Write error - recommend reassignment" },
- { 0x030c04, "Compression check miscompare error" },
- { 0x030c05, "Data expansion occurred during compress" },
- { 0x030c06, "Block not compressible" },
- { 0x030c07, "Write error - recovery needed" },
- { 0x030c08, "Write error - recovery failed" },
- { 0x030c09, "Write error - loss of streaming" },
- { 0x031100, "Unrecovered read error" },
- { 0x031106, "CIRC unrecovered error" },
- { 0x033101, "Format command failed" },
- { 0x033200, "No defect spare location available" },
- { 0x033201, "Defect list update failure" },
- { 0x035100, "Erase failure" },
- { 0x037200, "Session fixation error" },
- { 0x037201, "Session fixation error writin lead-in" },
- { 0x037202, "Session fixation error writin lead-out" },
- { 0x037300, "CD control error" },
- { 0x037302, "Power calibration area is full" },
- { 0x037303, "Power calibration area error" },
- { 0x037304, "Program memory area / RMA update failure" },
- { 0x037305, "Program memory area / RMA is full" },
- { 0x037306, "Program memory area / RMA is (almost) full" },
- { 0x040200, "No seek complete" },
- { 0x040300, "Write fault" },
- { 0x040900, "Track following error" },
- { 0x040901, "Tracking servo failure" },
- { 0x040902, "Focus servo failure" },
- { 0x040903, "Spindle servo failure" },
- { 0x041500, "Random positioning error" },
- { 0x041501, "Mechanical positioning or changer error" },
- { 0x041502, "Positioning error detected by read of medium" },
- { 0x043c00, "Mechanical positioning or changer error" },
- { 0x044000, "Diagnostic failure on component (ASCQ)" },
- { 0x044400, "Internal CD/DVD logical unit failure" },
- { 0x04b600, "Media load mechanism failed" },
- { 0x051a00, "Parameter list length error" },
- { 0x052000, "Invalid command operation code" },
- { 0x052100, "Logical block address out of range" },
- { 0x052102, "Invalid address for write" },
- { 0x052400, "Invalid field in command packet" },
- { 0x052600, "Invalid field in parameter list" },
- { 0x052601, "Parameter not supported" },
- { 0x052602, "Parameter value invalid" },
- { 0x052700, "Write protected media" },
- { 0x052c00, "Command sequence error" },
- { 0x052c03, "Current program area is not empty" },
- { 0x052c04, "Current program area is empty" },
- { 0x053001, "Cannot read medium - unknown format" },
- { 0x053002, "Cannot read medium - incompatible format" },
- { 0x053900, "Saving parameters not supported" },
- { 0x054e00, "Overlapped commands attempted" },
- { 0x055302, "Medium removal prevented" },
- { 0x055500, "System resource failure" },
- { 0x056300, "End of user area encountered on this track" },
- { 0x056400, "Illegal mode for this track or incompatible medium" },
- { 0x056f00, "Copy protection key exchange failure"
- " - Authentication failure" },
- { 0x056f01, "Copy protection key exchange failure - Key not present" },
- { 0x056f02, "Copy protection key exchange failure"
- " - Key not established" },
- { 0x056f03, "Read of scrambled sector without authentication" },
- { 0x056f04, "Media region code is mismatched to logical unit" },
- { 0x056f05, "Drive region must be permanent"
- " / region reset count error" },
- { 0x057203, "Session fixation error - incomplete track in session" },
- { 0x057204, "Empty or partially written reserved track" },
- { 0x057205, "No more RZONE reservations are allowed" },
- { 0x05bf00, "Loss of streaming" },
- { 0x062800, "Not ready to ready transition, medium may have changed" },
- { 0x062900, "Power on, reset or hardware reset occurred" },
- { 0x062a00, "Parameters changed" },
- { 0x062a01, "Mode parameters changed" },
- { 0x062e00, "Insufficient time for operation" },
- { 0x063f00, "Logical unit operating conditions have changed" },
- { 0x063f01, "Microcode has been changed" },
- { 0x065a00, "Operator request or state change input (unspecified)" },
- { 0x065a01, "Operator medium removal request" },
- { 0x0bb900, "Play operation aborted" },
- /* Here we use 0xff for the key (not a valid key) to signify
- * that these can have _any_ key value associated with them... */
- { 0xff0401, "Logical unit is in process of becoming ready" },
- { 0xff0400, "Logical unit not ready, cause not reportable" },
- { 0xff0402, "Logical unit not ready, initializing command required" },
- { 0xff0403, "Logical unit not ready, manual intervention required" },
- { 0xff0500, "Logical unit does not respond to selection" },
- { 0xff0800, "Logical unit communication failure" },
- { 0xff0802, "Logical unit communication parity error" },
- { 0xff0801, "Logical unit communication time-out" },
- { 0xff2500, "Logical unit not supported" },
- { 0xff4c00, "Logical unit failed self-configuration" },
- { 0xff3e00, "Logical unit has not self-configured yet" },
-};
-#endif
-
+/* ide-cd_verbose.c */
+void ide_cd_log_error(const char *, struct request *, struct request_sense *);
#endif /* _IDE_CD_H */
Index: b/drivers/ide/ide-cd_verbose.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-cd_verbose.c
@@ -0,0 +1,359 @@
+/*
+ * Verbose error logging for ATAPI CD/DVD devices.
+ *
+ * Copyright (C) 1994-1996 Scott Snyder <snyder@xxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1998 Erik Andersen <andersee@xxxxxxxxxx>
+ * Copyright (C) 1998-2000 Jens Axboe <axboe@xxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/cdrom.h>
+#include <scsi/scsi.h>
+
+#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
+void ide_cd_log_error(const char *name, struct request *failed_command,
+ struct request_sense *sense)
+{
+ /* Suppress printing unit attention and `in progress of becoming ready'
+ errors when we're not being verbose. */
+ if (sense->sense_key == UNIT_ATTENTION ||
+ (sense->sense_key == NOT_READY && (sense->asc == 4 ||
+ sense->asc == 0x3a)))
+ return;
+
+ printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
+ "asc: 0x%02x ascq: 0x%02x\n",
+ name, sense->error_code, sense->sense_key,
+ sense->asc, sense->ascq);
+}
+#else
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned short packet_command;
+ const char * const text;
+} packet_command_texts[] = {
+ { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
+ { GPCMD_REQUEST_SENSE, "Request Sense" },
+ { GPCMD_FORMAT_UNIT, "Format Unit" },
+ { GPCMD_INQUIRY, "Inquiry" },
+ { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
+ { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
+ { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
+ { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
+ { GPCMD_READ_10, "Read 10" },
+ { GPCMD_WRITE_10, "Write 10" },
+ { GPCMD_SEEK, "Seek" },
+ { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
+ { GPCMD_VERIFY_10, "Verify 10" },
+ { GPCMD_FLUSH_CACHE, "Flush Cache" },
+ { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
+ { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
+ { GPCMD_READ_HEADER, "Read Header" },
+ { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
+ { GPCMD_GET_CONFIGURATION, "Get Configuration" },
+ { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
+ { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
+ { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
+ "Get Event Status Notification" },
+ { GPCMD_PAUSE_RESUME, "Pause/Resume" },
+ { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
+ { GPCMD_READ_DISC_INFO, "Read Disc Info" },
+ { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
+ { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
+ { GPCMD_SEND_OPC, "Send OPC" },
+ { GPCMD_MODE_SELECT_10, "Mode Select 10" },
+ { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
+ { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
+ { GPCMD_CLOSE_TRACK, "Close Track" },
+ { GPCMD_BLANK, "Blank" },
+ { GPCMD_SEND_EVENT, "Send Event" },
+ { GPCMD_SEND_KEY, "Send Key" },
+ { GPCMD_REPORT_KEY, "Report Key" },
+ { GPCMD_LOAD_UNLOAD, "Load/Unload" },
+ { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
+ { GPCMD_READ_12, "Read 12" },
+ { GPCMD_GET_PERFORMANCE, "Get Performance" },
+ { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
+ { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
+ { GPCMD_SET_STREAMING, "Set Streaming" },
+ { GPCMD_READ_CD_MSF, "Read CD MSF" },
+ { GPCMD_SCAN, "Scan" },
+ { GPCMD_SET_SPEED, "Set Speed" },
+ { GPCMD_PLAY_CD, "Play CD" },
+ { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
+ { GPCMD_READ_CD, "Read CD" },
+};
+
+/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const char * const sense_key_texts[16] = {
+ "No sense data",
+ "Recovered error",
+ "Not ready",
+ "Medium error",
+ "Hardware error",
+ "Illegal request",
+ "Unit attention",
+ "Data protect",
+ "Blank check",
+ "(reserved)",
+ "(reserved)",
+ "Aborted command",
+ "(reserved)",
+ "(reserved)",
+ "Miscompare",
+ "(reserved)",
+};
+
+/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned long asc_ascq;
+ const char * const text;
+} sense_data_texts[] = {
+ { 0x000000, "No additional sense information" },
+ { 0x000011, "Play operation in progress" },
+ { 0x000012, "Play operation paused" },
+ { 0x000013, "Play operation successfully completed" },
+ { 0x000014, "Play operation stopped due to error" },
+ { 0x000015, "No current audio status to return" },
+ { 0x010c0a, "Write error - padding blocks added" },
+ { 0x011700, "Recovered data with no error correction applied" },
+ { 0x011701, "Recovered data with retries" },
+ { 0x011702, "Recovered data with positive head offset" },
+ { 0x011703, "Recovered data with negative head offset" },
+ { 0x011704, "Recovered data with retries and/or CIRC applied" },
+ { 0x011705, "Recovered data using previous sector ID" },
+ { 0x011800, "Recovered data with error correction applied" },
+ { 0x011801, "Recovered data with error correction and retries applied"},
+ { 0x011802, "Recovered data - the data was auto-reallocated" },
+ { 0x011803, "Recovered data with CIRC" },
+ { 0x011804, "Recovered data with L-EC" },
+ { 0x015d00, "Failure prediction threshold exceeded"
+ " - Predicted logical unit failure" },
+ { 0x015d01, "Failure prediction threshold exceeded"
+ " - Predicted media failure" },
+ { 0x015dff, "Failure prediction threshold exceeded - False" },
+ { 0x017301, "Power calibration area almost full" },
+ { 0x020400, "Logical unit not ready - cause not reportable" },
+ /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
+ { 0x020401, "Logical unit not ready"
+ " - in progress [sic] of becoming ready" },
+ { 0x020402, "Logical unit not ready - initializing command required" },
+ { 0x020403, "Logical unit not ready - manual intervention required" },
+ { 0x020404, "Logical unit not ready - format in progress" },
+ { 0x020407, "Logical unit not ready - operation in progress" },
+ { 0x020408, "Logical unit not ready - long write in progress" },
+ { 0x020600, "No reference position found (media may be upside down)" },
+ { 0x023000, "Incompatible medium installed" },
+ { 0x023a00, "Medium not present" },
+ { 0x025300, "Media load or eject failed" },
+ { 0x025700, "Unable to recover table of contents" },
+ { 0x030300, "Peripheral device write fault" },
+ { 0x030301, "No write current" },
+ { 0x030302, "Excessive write errors" },
+ { 0x030c00, "Write error" },
+ { 0x030c01, "Write error - Recovered with auto reallocation" },
+ { 0x030c02, "Write error - auto reallocation failed" },
+ { 0x030c03, "Write error - recommend reassignment" },
+ { 0x030c04, "Compression check miscompare error" },
+ { 0x030c05, "Data expansion occurred during compress" },
+ { 0x030c06, "Block not compressible" },
+ { 0x030c07, "Write error - recovery needed" },
+ { 0x030c08, "Write error - recovery failed" },
+ { 0x030c09, "Write error - loss of streaming" },
+ { 0x031100, "Unrecovered read error" },
+ { 0x031106, "CIRC unrecovered error" },
+ { 0x033101, "Format command failed" },
+ { 0x033200, "No defect spare location available" },
+ { 0x033201, "Defect list update failure" },
+ { 0x035100, "Erase failure" },
+ { 0x037200, "Session fixation error" },
+ { 0x037201, "Session fixation error writin lead-in" },
+ { 0x037202, "Session fixation error writin lead-out" },
+ { 0x037300, "CD control error" },
+ { 0x037302, "Power calibration area is full" },
+ { 0x037303, "Power calibration area error" },
+ { 0x037304, "Program memory area / RMA update failure" },
+ { 0x037305, "Program memory area / RMA is full" },
+ { 0x037306, "Program memory area / RMA is (almost) full" },
+ { 0x040200, "No seek complete" },
+ { 0x040300, "Write fault" },
+ { 0x040900, "Track following error" },
+ { 0x040901, "Tracking servo failure" },
+ { 0x040902, "Focus servo failure" },
+ { 0x040903, "Spindle servo failure" },
+ { 0x041500, "Random positioning error" },
+ { 0x041501, "Mechanical positioning or changer error" },
+ { 0x041502, "Positioning error detected by read of medium" },
+ { 0x043c00, "Mechanical positioning or changer error" },
+ { 0x044000, "Diagnostic failure on component (ASCQ)" },
+ { 0x044400, "Internal CD/DVD logical unit failure" },
+ { 0x04b600, "Media load mechanism failed" },
+ { 0x051a00, "Parameter list length error" },
+ { 0x052000, "Invalid command operation code" },
+ { 0x052100, "Logical block address out of range" },
+ { 0x052102, "Invalid address for write" },
+ { 0x052400, "Invalid field in command packet" },
+ { 0x052600, "Invalid field in parameter list" },
+ { 0x052601, "Parameter not supported" },
+ { 0x052602, "Parameter value invalid" },
+ { 0x052700, "Write protected media" },
+ { 0x052c00, "Command sequence error" },
+ { 0x052c03, "Current program area is not empty" },
+ { 0x052c04, "Current program area is empty" },
+ { 0x053001, "Cannot read medium - unknown format" },
+ { 0x053002, "Cannot read medium - incompatible format" },
+ { 0x053900, "Saving parameters not supported" },
+ { 0x054e00, "Overlapped commands attempted" },
+ { 0x055302, "Medium removal prevented" },
+ { 0x055500, "System resource failure" },
+ { 0x056300, "End of user area encountered on this track" },
+ { 0x056400, "Illegal mode for this track or incompatible medium" },
+ { 0x056f00, "Copy protection key exchange failure"
+ " - Authentication failure" },
+ { 0x056f01, "Copy protection key exchange failure - Key not present" },
+ { 0x056f02, "Copy protection key exchange failure"
+ " - Key not established" },
+ { 0x056f03, "Read of scrambled sector without authentication" },
+ { 0x056f04, "Media region code is mismatched to logical unit" },
+ { 0x056f05, "Drive region must be permanent"
+ " / region reset count error" },
+ { 0x057203, "Session fixation error - incomplete track in session" },
+ { 0x057204, "Empty or partially written reserved track" },
+ { 0x057205, "No more RZONE reservations are allowed" },
+ { 0x05bf00, "Loss of streaming" },
+ { 0x062800, "Not ready to ready transition, medium may have changed" },
+ { 0x062900, "Power on, reset or hardware reset occurred" },
+ { 0x062a00, "Parameters changed" },
+ { 0x062a01, "Mode parameters changed" },
+ { 0x062e00, "Insufficient time for operation" },
+ { 0x063f00, "Logical unit operating conditions have changed" },
+ { 0x063f01, "Microcode has been changed" },
+ { 0x065a00, "Operator request or state change input (unspecified)" },
+ { 0x065a01, "Operator medium removal request" },
+ { 0x0bb900, "Play operation aborted" },
+ /* Here we use 0xff for the key (not a valid key) to signify
+ * that these can have _any_ key value associated with them... */
+ { 0xff0401, "Logical unit is in process of becoming ready" },
+ { 0xff0400, "Logical unit not ready, cause not reportable" },
+ { 0xff0402, "Logical unit not ready, initializing command required" },
+ { 0xff0403, "Logical unit not ready, manual intervention required" },
+ { 0xff0500, "Logical unit does not respond to selection" },
+ { 0xff0800, "Logical unit communication failure" },
+ { 0xff0802, "Logical unit communication parity error" },
+ { 0xff0801, "Logical unit communication time-out" },
+ { 0xff2500, "Logical unit not supported" },
+ { 0xff4c00, "Logical unit failed self-configuration" },
+ { 0xff3e00, "Logical unit has not self-configured yet" },
+};
+
+void ide_cd_log_error(const char *name, struct request *failed_command,
+ struct request_sense *sense)
+{
+ int i;
+ const char *s = "bad sense key!";
+ char buf[80];
+
+ printk(KERN_ERR "ATAPI device %s:\n", name);
+ if (sense->error_code == 0x70)
+ printk(KERN_CONT " Error: ");
+ else if (sense->error_code == 0x71)
+ printk(" Deferred Error: ");
+ else if (sense->error_code == 0x7f)
+ printk(KERN_CONT " Vendor-specific Error: ");
+ else
+ printk(KERN_CONT " Unknown Error Type: ");
+
+ if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
+ s = sense_key_texts[sense->sense_key];
+
+ printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
+
+ if (sense->asc == 0x40) {
+ sprintf(buf, "Diagnostic failure on component 0x%02x",
+ sense->ascq);
+ s = buf;
+ } else {
+ int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
+ unsigned long key = (sense->sense_key << 16);
+
+ key |= (sense->asc << 8);
+ if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
+ key |= sense->ascq;
+ s = NULL;
+
+ while (hi > lo) {
+ mid = (lo + hi) / 2;
+ if (sense_data_texts[mid].asc_ascq == key ||
+ sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
+ s = sense_data_texts[mid].text;
+ break;
+ } else if (sense_data_texts[mid].asc_ascq > key)
+ hi = mid;
+ else
+ lo = mid + 1;
+ }
+ }
+
+ if (s == NULL) {
+ if (sense->asc > 0x80)
+ s = "(vendor-specific error)";
+ else
+ s = "(reserved error code)";
+ }
+
+ printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
+ s, sense->asc, sense->ascq);
+
+ if (failed_command != NULL) {
+ int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
+ s = NULL;
+
+ while (hi > lo) {
+ mid = (lo + hi) / 2;
+ if (packet_command_texts[mid].packet_command ==
+ failed_command->cmd[0]) {
+ s = packet_command_texts[mid].text;
+ break;
+ }
+ if (packet_command_texts[mid].packet_command >
+ failed_command->cmd[0])
+ hi = mid;
+ else
+ lo = mid + 1;
+ }
+
+ printk(KERN_ERR " The failed \"%s\" packet command "
+ "was: \n \"", s);
+ for (i = 0; i < sizeof(failed_command->cmd); i++)
+ printk(KERN_CONT "%02x ", failed_command->cmd[i]);
+ printk(KERN_CONT "\"\n");
+ }
+
+ /* The SKSV bit specifies validity of the sense_key_specific
+ * in the next two commands. It is bit 7 of the first byte.
+ * In the case of NOT_READY, if SKSV is set the drive can
+ * give us nice ETA readings.
+ */
+ if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
+ int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
+
+ printk(KERN_ERR " Command is %02d%% complete\n",
+ progress / 0xffff);
+ }
+
+ if (sense->sense_key == ILLEGAL_REQUEST &&
+ (sense->sks[0] & 0x80) != 0) {
+ printk(KERN_ERR " Error in %s byte %d",
+ (sense->sks[0] & 0x40) != 0 ?
+ "command packet" : "command data",
+ (sense->sks[1] << 8) + sense->sks[2]);
+
+ if ((sense->sks[0] & 0x40) != 0)
+ printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
+
+ printk(KERN_CONT "\n");
+ }
+}
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/