Re: [PATCH] libata and starting/stopping ATAPI floppy devices

[Tejun Heo]

Ondrej Zary wrote:
> Hello,
> I switched to libata drivers for my onboard PATA controller (PIIX4) recently. 
> Everything works fine except that kernel tries to start not only my hard 
> drive (sda) but also LS-120 floppy drive (sdb) which does not like it:
> 
> sd 0:0:0:0: [sda] Starting disk
> ata1.00: configured for UDMA/33
> sd 0:0:0:0: [sda] 58633344 512-byte hardware sectors (30020 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
> DPO or FUA
> sd 1:0:1:0: [sdb] Starting disk
> ata2.00: configured for UDMA/33
> ata2.01: configured for PIO2
> sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
> sd 1:0:1:0: [sdb] Sense Key : 0x2 [current]
> sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0
> 
> 
> The question is: is it correct? Or a patch like this should be applied?

Yeah, looks good to me.  Please reformat the message w/ S-O-B.

Acked-by: Tejun Heo <htejun@xxxxxxxxx>

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/