[PATCH 00/10] x86: Reduce memory and intra-node effects with large count NR_CPUs V2

[travis]

This patchset addresses the kernel bloat that occurs when NR_CPUS is increased.
The memory numbers below are with NR_CPUS = 1024 which I've been testing (4 and
32 real processors, the rest "possible" using the additional_cpus start option.)
These changes are all specific to the x86 architecture, non-arch specific
changes will follow.

Based on 2.6.24-rc6-mm1

Signed-off-by: Mike Travis <travis@xxxxxxx>
Reviewed-by: Christoph Lameter <clameter@xxxxxxx>
---
V1->V2:
    - Remove extraneous casts
    - Add comment about node memory < NODE_MIN_SIZE
    - changed pxm_to_node_map to u16
    - changed memnode map entries to u16
    - Fix !NUMA builds with '#ifdef CONFIG_NUMA"
    - Add slight optimization to apic_is_clustered_box()
---

The following columns are using the default x86_64 config with no modules.
32cpus is the default NR_CPUS, 1kcpus-before has NR_CPUS = 1024, and
1kcpus-after is after applying this patch.

As noticeable below there's still plenty of room for improvement... ;-)

32cpus			  1kcpus-before		    1kcpus-after
       228 .altinstr_repl 	  +0 .altinstr_repl 	    +0 .altinstr_repl
      1219 .altinstructio 	  +0 .altinstructio 	    +0 .altinstructio
    717512 .bss		    +1542784 .bss	       -147456 .bss
     61374 .comment	  	  +0 .comment	    	    +0 .comment
	16 .con_initcall. 	  +0 .con_initcall. 	    +0 .con_initcall.
    425256 .data	      +20224 .data	    	 -1024 .data
    178688 .data.cachelin  +12898304 .data.cachelin 	    +0 .data.cachelin
      8192 .data.init_tas 	  +0 .data.init_tas 	    +0 .data.init_tas
      4096 .data.page_ali 	  +0 .data.page_ali 	    +0 .data.page_ali
     27008 .data.percpu	     +128768 .data.percpu   	  +128 .data.percpu
     43904 .data.read_mos   +8707872 .data.read_mos 	 -4096 .data.read_mos
	 4 .data_nosave	  	  +0 .data_nosave   	    +0 .data_nosave
      5141 .exit.text	  	  +9 .exit.text	    	    -1 .exit.text
    138480 .init.data	  	+992 .init.data	    	 +3616 .init.data
       133 .init.ramfs	  	  +0 .init.ramfs    	    +1 .init.ramfs
      3192 .init.setup	  	  +0 .init.setup    	    +0 .init.setup
    159754 .init.text	  	+891 .init.text	    	   +13 .init.text
      2288 .initcall.init 	  +0 .initcall.init 	    +0 .initcall.init
	 8 .jiffies	  	  +0 .jiffies	    	    +0 .jiffies
      4512 .pci_fixup	  	  +0 .pci_fixup	    	    +0 .pci_fixup
   1314438 .rodata	       +1312 .rodata	    	  -552 .rodata
     36552 .smp_locks	  	+256 .smp_locks	    	    +0 .smp_locks
   3971848 .text	      +12992 .text	    	 +1781 .text
      3368 .vdso	  	  +0 .vdso	    	    +0 .vdso
	 4 .vgetcpu_mode  	  +0 .vgetcpu_mode  	    +0 .vgetcpu_mode
       218 .vsyscall_0	  	  +0 .vsyscall_0    	    +0 .vsyscall_0
	52 .vsyscall_1	  	  +0 .vsyscall_1    	    +0 .vsyscall_1
	91 .vsyscall_2	  	  +0 .vsyscall_2    	    +0 .vsyscall_2
	 8 .vsyscall_3	  	  +0 .vsyscall_3    	    +0 .vsyscall_3
	54 .vsyscall_fn	  	  +0 .vsyscall_fn   	    +0 .vsyscall_fn
	80 .vsyscall_gtod 	  +0 .vsyscall_gtod 	    +0 .vsyscall_gtod
     39480 __bug_table	  	  +0 __bug_table    	    +0 __bug_table
     16320 __ex_table	  	  +0 __ex_table	    	    +0 __ex_table
      9160 __param	  	  +0 __param	    	    +0 __param
   7172678 Total	   +23314404 Total	       -147590 Total

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/