Re: JMicron PATA 2.6.24-rc7 can't find drives

[Marcin Gil]

Lennart Sorensen wrote:
> On Thu, Jan 24, 2008 at 03:30:44PM +0100, Marcin Gil wrote:
> > This is not a problem. I've posted (in original mail) that DVD is found 
> > fine (and linked as /dev/cdrom). But I have a Maxtor HDD on the same 
> > ide-tape and it is not detected at all.
>
> Are you using an 80 pin IDE cable and are both drives set to cable
> select (usually preferable) or is one master and one slave?
Yes, this is 80-wire cable; both are connected on the same cable. HDD is 
master and DVD is slave. I'll later try disconnecting DVD and see what 
happens. I didn't set cable-select due to how these drives are connected

+-----+-----+
mobo  hdd   dvd

I think that cable select would take dvd as master and hdd as slave.
This was not preferable when hdd was my primary drive. I can try 
cable-select now since I boot off new SATA drive.

Thank you,
-Marcin Gil

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/