Re: [PATCH 012/196 ver2] nozomi driver

From: Frank Seidel
Date: Fri Jan 25 2008 - 15:13:38 EST

From: Frank Seidel <fseidel@xxxxxxx>

Minor cleanups and removal of in-file changelog:

- Correction of misspellings and wrong encoded Name
- changed 'unsigned' to 'unsigned int' for better readability
- use of generic devicefile access macro
- fixed/added explanatory comment to ntty_put_char

Signed-off-by: Frank Seidel <fseidel@xxxxxxx>
---
drivers/char/nozomi.c | 122 ++++++++++++++------------------------------------
1 file changed, 36 insertions(+), 86 deletions(-)

--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -2,7 +2,7 @@
* nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
*
* Written by: Ulf Jakobsson,
- * Jan ïerfeldt,
+ * Jan Ãkerfeldt,
* Stefan Thomasson,
*
* Maintained by: Paul Hardwick (p.hardwick@xxxxxxxxxx)
@@ -38,60 +38,6 @@
* --------------------------------------------------------------------------
*/

-/*
- * CHANGELOG
- * Version 2.1d
- * 11-November-2007 Jiri Slaby, Frank Seidel
- * - Big rework of multicard support by Jiri
- * - Major cleanups (semaphore to mutex, endianess, no major reservation)
- * - Optimizations
- *
- * Version 2.1c
- * 30-October-2007 Frank Seidel
- * - Completed multicard support
- * - Minor cleanups
- *
- * Version 2.1b
- * 07-August-2007 Frank Seidel
- * - Minor cleanups
- * - theoretical multicard support
- *
- * Version 2.1
- * 03-July-2006 Paul Hardwick
- *
- * - Stability Improvements. Incorporated spinlock wraps patch.
- * - Updated for newer 2.6.14+ kernels (tty_buffer_request_room)
- * - using __devexit macro for tty
- *
- *
- * Version 2.0
- * 08-feb-2006 15:34:10:Ulf
- *
- * -Fixed issue when not waking up line disipine layer, could probably result
- * in better uplink performance for 2.4.
- *
- * -Fixed issue with big endian during initalization, now proper toggle flags
- * are handled between preloader and maincode.
- *
- * -Fixed flow control issue.
- *
- * -Added support for setting DTR.
- *
- * -For 2.4 kernels, removing temporary buffer that's not needed.
- *
- * -Reading CTS only for modem port (only port that supports it).
- *
- * -Return 0 in write_room instead of netative value, it's not handled in
- * upper layer.
- *
- * --------------------------------------------------------------------------
- * Version 1.0
- *
- * First version of driver, only tested with card of type F32_2.
- * Works fine with 2.4 and 2.6 kernels.
- * Driver also support big endian architecture.
- */
-
/* Enable this to have a lot of debug printouts */
#define DEBUG

@@ -143,8 +89,9 @@ do { \
/* Do we need this settable at runtime? */
static int debug = NOZOMI_DEBUG_LEVEL;

-#define D(lvl, args...) do {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
- while (0)
+#define D(lvl, args...) do \
+ {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
+ while (0)
#define D_(lvl, args...) D(lvl, ##args)

/* These printouts are always printed */
@@ -273,13 +220,13 @@ enum port_type {
/* Big endian */

struct toggles {
- unsigned enabled:5; /*
+ unsigned int enabled:5; /*
* Toggle fields are valid if enabled is 0,
* else A-channels must always be used.
*/
- unsigned diag_dl:1;
- unsigned mdm_dl:1;
- unsigned mdm_ul:1;
+ unsigned int diag_dl:1;
+ unsigned int mdm_dl:1;
+ unsigned int mdm_ul:1;
} __attribute__ ((packed));

/* Configuration table to read at startup of card */
@@ -320,19 +267,19 @@ struct config_table {
/* This stores all control downlink flags */
struct ctrl_dl {
u8 port;
- unsigned reserved:4;
- unsigned CTS:1;
- unsigned RI:1;
- unsigned DCD:1;
- unsigned DSR:1;
+ unsigned int reserved:4;
+ unsigned int CTS:1;
+ unsigned int RI:1;
+ unsigned int DCD:1;
+ unsigned int DSR:1;
} __attribute__ ((packed));

/* This stores all control uplink flags */
struct ctrl_ul {
u8 port;
- unsigned reserved:6;
- unsigned RTS:1;
- unsigned DTR:1;
+ unsigned int reserved:6;
+ unsigned int RTS:1;
+ unsigned int DTR:1;
} __attribute__ ((packed));

#else
@@ -340,10 +287,10 @@ struct ctrl_ul {

/* This represents the toggle information */
struct toggles {
- unsigned mdm_ul:1;
- unsigned mdm_dl:1;
- unsigned diag_dl:1;
- unsigned enabled:5; /*
+ unsigned int mdm_ul:1;
+ unsigned int mdm_dl:1;
+ unsigned int diag_dl:1;
+ unsigned int enabled:5; /*
* Toggle fields are valid if enabled is 0,
* else A-channels must always be used.
*/
@@ -379,19 +326,19 @@ struct config_table {

/* This stores all control downlink flags */
struct ctrl_dl {
- unsigned DSR:1;
- unsigned DCD:1;
- unsigned RI:1;
- unsigned CTS:1;
- unsigned reserverd:4;
+ unsigned int DSR:1;
+ unsigned int DCD:1;
+ unsigned int RI:1;
+ unsigned int CTS:1;
+ unsigned int reserverd:4;
u8 port;
} __attribute__ ((packed));

/* This stores all control uplink flags */
struct ctrl_ul {
- unsigned DTR:1;
- unsigned RTS:1;
- unsigned reserved:6;
+ unsigned int DTR:1;
+ unsigned int RTS:1;
+ unsigned int reserved:6;
u8 port;
} __attribute__ ((packed));
#endif
@@ -694,7 +641,7 @@ static void dump_table(const struct nozo
dc->config_table.ul_ctrl_len);
}
#else
-static __inline__ void dump_table(const struct nozomi *dc) { }
+static inline void dump_table(const struct nozomi *dc) { }
#endif

/*
@@ -1102,7 +1049,7 @@ static int send_flow_control(struct nozo
}

/*
- * Handle donlink data, ports that are handled are modem and diagnostics
+ * Handle downlink data, ports that are handled are modem and diagnostics
* Return 1 - ok
* Return 0 - toggle fields are out of sync
*/
@@ -1363,7 +1310,7 @@ static ssize_t card_type_show(struct dev

return sprintf(buf, "%d\n", dc->card_type);
}
-static DEVICE_ATTR(card_type, 0444, card_type_show, NULL);
+static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);

static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -1372,7 +1319,7 @@ static ssize_t open_ttys_show(struct dev

return sprintf(buf, "%u\n", dc->open_ttys);
}
-static DEVICE_ATTR(open_ttys, 0444, open_ttys_show, NULL);
+static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);

static void make_sysfs_files(struct nozomi *dc)
{
@@ -1882,7 +1829,10 @@ static void ntty_throttle(struct tty_str
/* just to discard single character writes */
static void ntty_put_char(struct tty_struct *tty, unsigned char c)
{
- /* FIXME !!! */
+ /*
+ * card does not react correct when we write single chars
+ * to the card, so we discard them
+ */
DBG2("PUT CHAR Function: %c", c);
}

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/