[PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
From: Borislav Petkov
Date: Sun Jan 27 2008 - 04:50:04 EST
From: Borislav Petkov <bbpetkov@xxxxxxxx>
Signed-off-by: Borislav Petkov <bbpetkov@xxxxxxxx>
---
drivers/ide/ide-tape.c | 42 ++----------------------------------------
1 files changed, 2 insertions(+), 40 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index dbececc..efb9d25 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -107,7 +107,6 @@ typedef struct os_dat_s {
* The following are used to debug the driver:
*
* Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.
- * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in
* some places.
*
* Setting them to 0 will restore normal operation mode:
@@ -121,7 +120,6 @@ typedef struct os_dat_s {
* esthetic.
*/
#define IDETAPE_DEBUG_LOG 0
-#define IDETAPE_DEBUG_BUGS 1
/*
* After each failed packet command we issue a request sense command
@@ -847,14 +845,12 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne
int count;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_input_buffers\n");
idetape_discard_data(drive, bcount);
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
bcount -= count;
@@ -874,13 +870,11 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign
int count;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_output_buffers\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)pc->b_count, (unsigned int)bcount);
HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count);
bcount -= count;
@@ -905,13 +899,11 @@ static void idetape_update_buffers (idetape_pc_t *pc)
if (test_bit(PC_WRITING, &pc->flags))
return;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_update_buffers\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)bh->b_size, (unsigned int)bcount);
atomic_set(&bh->b_count, count);
if (atomic_read(&bh->b_count) == bh->b_size)
@@ -1067,12 +1059,10 @@ static void idetape_active_next_stage (ide_drive_t *drive)
if (tape->debug_level >= 4)
printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n");
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (stage == NULL) {
printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
rq->rq_disk = tape->disk;
rq->buffer = NULL;
@@ -1147,28 +1137,24 @@ static void idetape_remove_stage_head (ide_drive_t *drive)
if (tape->debug_level >= 4)
printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n");
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (tape->first_stage == NULL) {
printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n");
- return;
+ return;
}
if (tape->active_stage == tape->first_stage) {
printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
stage = tape->first_stage;
tape->first_stage = stage->next;
idetape_kfree_stage(tape, stage);
tape->nr_stages--;
if (tape->first_stage == NULL) {
tape->last_stage = NULL;
-#if IDETAPE_DEBUG_BUGS
if (tape->next_stage != NULL)
printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
if (tape->nr_stages)
printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
-#endif /* IDETAPE_DEBUG_BUGS */
}
}
@@ -1656,13 +1642,11 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
int dma_ok = 0;
u16 bcount;
-#if IDETAPE_DEBUG_BUGS
if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD &&
pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
"Two request sense in serial were issued\n");
}
-#endif /* IDETAPE_DEBUG_BUGS */
if (tape->failed_pc == NULL && pc->c[0] != IDETAPE_REQUEST_SENSE_CMD)
tape->failed_pc = pc;
@@ -1973,7 +1957,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) {
return idetape_issue_packet_command(drive, tape->failed_pc);
}
-#if IDETAPE_DEBUG_BUGS
if (postponed_rq != NULL)
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
@@ -1981,7 +1964,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
idetape_end_request(drive, 0, 0);
return ide_stopped;
}
-#endif /* IDETAPE_DEBUG_BUGS */
tape->postponed_rq = NULL;
@@ -2168,13 +2150,11 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *
int ret = 0;
while (n) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_copy_stage_from_user\n");
return 1;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
ret = 1;
@@ -2198,13 +2178,11 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
int ret = 0;
while (n) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_copy_stage_to_user\n");
return 1;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min(tape->b_count, n);
if (copy_to_user(buf, tape->b_data, count))
ret = 1;
@@ -2284,12 +2262,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
DECLARE_COMPLETION_ONSTACK(wait);
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_BUGS
if (rq == NULL || !blk_special_request(rq)) {
printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
rq->end_io_data = &wait;
rq->end_io = blk_end_sync_rq;
spin_unlock_irq(&tape->spinlock);
@@ -2604,12 +2580,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
if (tape->debug_level >= 2)
printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (idetape_pipeline_active(tape)) {
printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
return (0);
}
-#endif /* IDETAPE_DEBUG_BUGS */
idetape_init_rq(&rq, cmd);
rq.rq_disk = tape->disk;
@@ -2794,8 +2768,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
int blocks, min;
struct idetape_bh *bh;
-
-#if IDETAPE_DEBUG_BUGS
+
if (tape->chrdev_direction != idetape_direction_write) {
printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
return;
@@ -2804,7 +2777,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
tape->merge_stage_size = tape->stage_size;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if (tape->merge_stage_size) {
blocks = tape->merge_stage_size / tape->tape_block_size;
if (tape->merge_stage_size % tape->tape_block_size) {
@@ -2849,7 +2821,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
* can be totally different on the next backup).
*/
tape->max_stages = tape->min_pipeline;
-#if IDETAPE_DEBUG_BUGS
if (tape->first_stage != NULL ||
tape->next_stage != NULL ||
tape->last_stage != NULL ||
@@ -2860,7 +2831,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
tape->first_stage, tape->next_stage,
tape->last_stage, tape->nr_stages);
}
-#endif /* IDETAPE_DEBUG_BUGS */
}
static void idetape_restart_speed_control (ide_drive_t *drive)
@@ -2891,12 +2861,10 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
idetape_empty_write_pipeline(drive);
idetape_flush_tape_buffers(drive);
}
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage || tape->merge_stage_size) {
printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
return -ENOMEM;
tape->chrdev_direction = idetape_direction_read;
@@ -2997,12 +2965,10 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
tape->pipeline_head++;
calculate_speeds(drive);
}
-#if IDETAPE_DEBUG_BUGS
if (bytes_read > blocks * tape->tape_block_size) {
printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
bytes_read = blocks * tape->tape_block_size;
}
-#endif /* IDETAPE_DEBUG_BUGS */
return (bytes_read);
}
@@ -3301,13 +3267,11 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->chrdev_direction != idetape_direction_write) {
if (tape->chrdev_direction == idetape_direction_read)
idetape_discard_read_pipeline(drive, 1);
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage || tape->merge_stage_size) {
printk(KERN_ERR "ide-tape: merge_stage_size "
"should be 0 now\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
return -ENOMEM;
tape->chrdev_direction = idetape_direction_write;
@@ -3335,12 +3299,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->restart_speed_control_req)
idetape_restart_speed_control(drive);
if (tape->merge_stage_size) {
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage_size >= tape->stage_size) {
printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count);
if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
ret = -EFAULT;
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/