[PATCH 24/32] ide-tape: remove unreachable code chunk

From: Borislav Petkov
Date: Sun Jan 27 2008 - 04:58:43 EST


From: Borislav Petkov <bbpetkov@xxxxxxxx>

tape->speed_ctl is set to 1 in idetape_setup(), but, in calculate_speeds() its
value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_ctl != 1 since they are never executed.

Also, rename calculate_speeds() by adding driver's prefix as is with the other
function names.

Signed-off-by: Borislav Petkov <bbpetkov@xxxxxxxx>
---
drivers/ide/ide-tape.c | 23 +++++++++--------------
1 files changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 31edb0c..eab552e 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -61,7 +61,8 @@
* the optimum value or until we reach MAX.
*
* Setting the following parameter to 0 is illegal: the pipelined mode
- * cannot be disabled (calculate_speeds() divides by tape->max_stages.)
+ * cannot be disabled (idetape_calculate_speeds() divides by
+ * tape->max_stages.)
*/
#define IDETAPE_MIN_PIPELINE_STAGES 1
#define IDETAPE_MAX_PIPELINE_STAGES 400
@@ -1462,10 +1463,9 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
pc->callback = &idetape_pc_callback;
}

-static void calculate_speeds(ide_drive_t *drive)
+static void idetape_calculate_speeds(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- int full = 125, empty = 75;

if (time_after(jiffies, tape->ctl_pipe_htime + 120 * HZ)) {
tape->ctl_prev_pipe_h = tape->ctl_last_pipe_h;
@@ -1497,9 +1497,8 @@ static void calculate_speeds(ide_drive_t *drive)
tape->unctl_pipe_htime = jiffies;
}
tape->pipe_hspeed = max(tape->unctl_pipe_hspeed, tape->pipe_ctl_hspeed);
- if (tape->speed_ctl == 0) {
- tape->max_ins_speed = 5000;
- } else if (tape->speed_ctl == 1) {
+
+ if (tape->speed_ctl == 1) {
if (tape->nr_pending_stages >= tape->max_stages / 2)
tape->max_ins_speed = tape->pipe_hspeed +
(1100 - tape->pipe_hspeed) * 2 *
@@ -1511,13 +1510,9 @@ static void calculate_speeds(ide_drive_t *drive)
tape->nr_pending_stages / tape->max_stages;
if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
tape->max_ins_speed = 5000;
- } else if (tape->speed_ctl == 2) {
- tape->max_ins_speed = tape->pipe_hspeed * empty / 100 +
- (tape->pipe_hspeed * full / 100 - tape->pipe_hspeed *
- empty / 100) * tape->nr_pending_stages
- / tape->max_stages;
} else
tape->max_ins_speed = tape->speed_ctl;
+
tape->max_ins_speed = max(tape->max_ins_speed, 500);
}

@@ -1696,7 +1691,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
if (time_after(jiffies, tape->ins_time))
tape->ins_speed = tape->ins_size / 1024 * HZ /
(jiffies - tape->ins_time);
- calculate_speeds(drive);
+ idetape_calculate_speeds(drive);
if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
(stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
@@ -2416,7 +2411,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
idetape_switch_buffers(tape, new_stage);
idetape_add_stage_tail(drive, new_stage);
tape->pipeline_head++;
- calculate_speeds(drive);
+ idetape_calculate_speeds(drive);

/*
* Estimate whether the tape has stopped writing by checking
@@ -2658,7 +2653,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
idetape_remove_stage_head(drive);
spin_unlock_irqrestore(&tape->que_lock, flags);
tape->pipeline_head++;
- calculate_speeds(drive);
+ idetape_calculate_speeds(drive);
}
if (bytes_read > blocks * tape->blk_sz) {
printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
--
1.5.3.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/