"inconsistent lock state" (netconsole/net related)

[Marcin Slusarz]

Hi

My box is locking up on start of X.org so I enabled netconsole
and at every boot I'm getting:

ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: Compex RL2000 found at 0xb000, IRQ 17, 00:80:48:de:5e:89.
netconsole: local port 12345
netconsole: local IP 10.0.0.2
netconsole: interface eth0
netconsole: remote port 8888
netconsole: remote IP 10.0.0.1
netconsole: remote ethernet address 00:06:5b:6a:a5:74
netconsole: device eth0 not up yet, forcing it
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
Switched to high resolution mode on CPU 0
console [netcon0] enabled

=================================
[ INFO: inconsistent lock state ]
2.6.24 #83
---------------------------------
inconsistent {in-softirq-W} -> {softirq-on-W} usage.
swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (_xmit_ETHER){-+..}, at: [<ffffffff8049b890>] netpoll_send_skb+0x110/0x190
{in-softirq-W} state was registered at:
  [<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 527623
hardirqs last  enabled at (527623): [<ffffffff805250a5>] _spin_unlock_irqrestore+0x65/0x80
hardirqs last disabled at (527622): [<ffffffff80524c9d>] _spin_lock_irqsave+0x1d/0x60
softirqs last  enabled at (527618): [<ffffffff8023afb3>] __do_softirq+0xb3/0xd0
softirqs last disabled at (527609): [<ffffffff8020c6cc>] call_softirq+0x1c/0x30

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (target_list_lock){--..}, at: [<ffffffff80426c20>] write_msg+0x40/0xe0

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24 #83

Call Trace:
 [<ffffffff80257129>] print_usage_bug+0x189/0x190
 [<ffffffff80258001>] mark_lock+0x4d1/0x660
 [<ffffffff80258ff1>] __lock_acquire+0x701/0x10f0
 [<ffffffff805250b5>] _spin_unlock_irqrestore+0x75/0x80
 [<ffffffff8049b890>] netpoll_send_skb+0x110/0x190
 [<ffffffff80259a72>] lock_acquire+0x92/0xc0
 [<ffffffff8049b890>] netpoll_send_skb+0x110/0x190
 [<ffffffff80524de0>] _spin_trylock+0x40/0x80
 [<ffffffff8049b890>] netpoll_send_skb+0x110/0x190
 [<ffffffff8049c79a>] netpoll_send_udp+0x22a/0x2a0
 [<ffffffff80426c82>] write_msg+0xa2/0xe0
 [<ffffffff8023539e>] __call_console_drivers+0x4e/0x70
 [<ffffffff80235414>] _call_console_drivers+0x54/0x90
 [<ffffffff80235757>] release_console_sem+0x117/0x260
 [<ffffffff8023630d>] register_console+0x15d/0x2f0
 [<ffffffff80702045>] init_netconsole+0x205/0x220
 [<ffffffff806e3659>] kernel_init+0xc9/0x2b0
 [<ffffffff8052439d>] trace_hardirqs_on_thunk+0x35/0x3a
 [<ffffffff802583a9>] trace_hardirqs_on+0xd9/0x180
 [<ffffffff8020c358>] child_rip+0xa/0x12
 [<ffffffff8020bf13>] restore_args+0x0/0x30
 [<ffffffff80235699>] release_console_sem+0x59/0x260
 [<ffffffff806e3590>] kernel_init+0x0/0x2b0
 [<ffffffff8020c34e>] child_rip+0x0/0x12

netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.3
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20
ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: WDC WD1600JD-00HBB0, 08.02D08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
(...)

I'm on latest git (326e96b92306b7af24a3608ec01156cba17a3fc1: printk: revert ktime_get() timestamps).
If you want more informations just ask.

Now I'm going to bisect lockup because netconsole didn't help...

Marcin Slusarz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/