Re: [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers

[Kumar Gala]

On Jan 25, 2008, at 11:11 AM, Jochen Friedrich wrote:

> Using the port of 2.4 code from Vitaly Bordug <vitb@xxxxxxxxxxxxxxxxxxx 
> >
> and the actual algorithm used by the i2c driver of the DBox code on
> cvs.tuxboc.org from Tmbinc, Gillem (htoa@xxxxxxx). Renamed i2c-rpx.c  
> and
> i2c-algo-8xx.c to i2c-cpm.c and converted the driver to an
> of_platform_driver.
>
> Signed-off-by: Jochen Friedrich <jochen@xxxxxxxx>
> ---
> arch/powerpc/boot/dts/mpc8272ads.dts         |   10 +
> arch/powerpc/boot/dts/mpc866ads.dts          |   10 +
> arch/powerpc/boot/dts/mpc885ads.dts          |   10 +
> arch/powerpc/platforms/8xx/mpc885ads_setup.c |    5 +
> drivers/i2c/busses/Kconfig                   |   10 +
> drivers/i2c/busses/Makefile                  |    1 +
> drivers/i2c/busses/i2c-cpm.c                 |  759 +++++++++++++++++ 
> +++++++++
> 7 files changed, 805 insertions(+), 0 deletions(-)

really should be split in two patches.  The drivers/i2c/* should go  
via the i2c maintainers.  the arch/powerpc via me or vitaly.

- k

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/