Re: [2.6.24-rc6-mm1]Build failure in drivers/net/ehea/ehea_main.c

[Christoph Raisch]

Greg KH <greg@xxxxxxxxx> wrote on 29.01.2008 14:23:09:

> On Tue, Jan 29, 2008 at 11:12:40AM +0100, Jan-Bernd Themann wrote:
...
> > The sym-link is not gereated automatically as the device for portX is
added
> > to the eHEA device (as subnode) where the eHEA device is not a bus.
>
> Then please fix that, no other driver has this kind of problem, right?
> Are you just passing the wrong "device" to the networking subsystem?
>
> > If this sym-link is of interest (which I guess is the case as most
devices
> > have it) we have to create it somehow.
>
> Why would you have to do this by hand?  What makes this driver so unique
> in the kernel that it would have to do this?  We have lots of other
> multi-port ethernet drivers today without this issue, right?
>
> confused,
>
> greg k-h

well, the major difference is hea is not PCI.
All PCI cards we checked have a 1:1 relationship between PCI function (PCI
config space)
and a single ethernet port.
Even if the same Ethernet chip has two ports, it shows up as two separate
adapters from the PCI perspective (two PCI entries in /sys/bus/pci/devices

host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.0/
total 0
lrwxrwxrwx 1 root root      0 2008-01-28 14:59 bus -> ../../../../bus/pci
-r--r--r-- 1 root root   4096 2008-01-28 14:59 class
-rw-r--r-- 1 root root    256 2008-01-28 14:59 config
-r--r--r-- 1 root root   4096 2008-01-28 14:59 device
-r--r--r-- 1 root root   4096 2008-01-29 14:26 devspec
lrwxrwxrwx 1 root root      0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000
-r--r--r-- 1 root root   4096 2008-01-28 14:59 irq
-r--r--r-- 1 root root   4096 2008-01-29 14:26 local_cpus
-r--r--r-- 1 root root   4096 2008-01-28 14:59 modalias
lrwxrwxrwx 1 root root      0 2008-01-29 14:26 net:eth1 ->
../../../../class/net/eth1
-r--r--r-- 1 root root   4096 2008-01-28 14:59 resource
....
host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.1/
total 0
lrwxrwxrwx 1 root root      0 2008-01-28 14:59 bus -> ../../../../bus/pci
-r--r--r-- 1 root root   4096 2008-01-28 14:59 class
-rw-r--r-- 1 root root    256 2008-01-28 14:59 config
-r--r--r-- 1 root root   4096 2008-01-28 14:59 device
-r--r--r-- 1 root root   4096 2008-01-29 14:29 devspec
lrwxrwxrwx 1 root root      0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000
-r--r--r-- 1 root root   4096 2008-01-28 14:59 irq
-r--r--r-- 1 root root   4096 2008-01-29 14:29 local_cpus
-r--r--r-- 1 root root   4096 2008-01-28 14:59 modalias
lrwxrwxrwx 1 root root      0 2008-01-29 14:29 net:eth2 ->
../../../../class/net/eth2
...

These pci functions corresponds to a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
and
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1

The busdriver currently does not find out, how many ports are in a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1.
This is up to the hardware specific driver responsible for ehea or ehca.
Think of a PCI card where the PCI busdriver
can not determine how many ports are implemented on the card.

How should this be mapped to /sys ?

Should we try to "flatten" the ports to something like
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port0
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port1
...which means physical hierarchy information would look a bit strange,
but could be the simpler one.

The way which corresponds to the hardware would be to
improve the kernel in such a way that hierarchical ports also wortk for
netdev_register.
Then we could keep this structure
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1


So, which way should we try?

Gruss / Regards
Christoph Raisch


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/