[PATCH 4/4] [libata] Blackfin pata-bf54x driver: fix compiling bug - no ata_port struct in struct ata_device any more

[Bryan Wu]

Cc: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
Signed-off-by: Bryan Wu <bryan.wu@xxxxxxxxxx>
---
 drivers/ata/pata_bf54x.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index d66f773..7f87f10 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -299,7 +299,7 @@ static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	*/
 	n6 = num_clocks_min(t6min, fsclk);
 	if (mode >= 0 && mode <= 4 && n6 >= 1) {
-		dev_dbg(adev->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
+		dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
 		/* calculate the timing values for register transfers. */
 		while (mode > 0 && pio_fsclk[mode] > fsclk)
 			mode--;
@@ -376,7 +376,7 @@ static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 	mode = adev->dma_mode - XFER_UDMA_0;
 	if (mode >= 0 && mode <= 5) {
-		dev_dbg(adev->ap->dev, "set udmamode: mode=%d\n", mode);
+		dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode);
 		/* the most restrictive timing value is t6 and tc,
 		 * the DIOW - data hold. If one SCLK pulse is longer
 		 * than this minimum value then register
@@ -433,7 +433,7 @@ static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 	mode = adev->dma_mode - XFER_MW_DMA_0;
 	if (mode >= 0 && mode <= 2) {
-		dev_dbg(adev->ap->dev, "set mdmamode: mode=%d\n", mode);
+		dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode);
 		/* the most restrictive timing value is tf, the DMACK to
 		 * read data released. If one SCLK pulse is longer than
 		 * this maximum value then the MDMA mode
-- 
1.5.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/