Re: swsusp on an AMD x2-64, 2.6.24: regression?

[Pavel Machek]

On Fri 2008-02-01 00:41:06, Michael Tokarev wrote:
> Since I upgraded from 2.6.23 to 2.6.24, suspend to
> disk does not work anymore on this machine.  I'm
> trying to debug this now, for several hours already,
> without much luck so far.
> 
> The machine is based on AMD X2-64 (BE-2400) CPU and
> NVidia MCP51PV (GeForce 6150/NForce 430) chipset.
> 
> Up until 2.6.23 (both 32- and 64-bit kernels), suspend/
> resume worked just fine without any glitch.
> 
> With 2.6.24, it tries to suspend, saves pages to disk,
> when prints this:
> 
> ..Saving pages... done.
> Sl
> Suspending console(s)
> _
> 
> At this point, nothing more happens.  It does not
> react to keyboard or to any other external events,
> only reset/poweroff helps.  Note the "Sl" stuff -
> I guess it's a beginning of some message, but I
> don't know which one.
> 
> After a hard reboot after that, the system resumes
> from the saved image.
> 
> This happens with both 32- and 64-bits kernels, when
> using either good'old `echo disk > /sys/power/state'
> or when using s2disk from uswsusp (with 32bits kernel,
> as this utility does not work with 64bits kernel when
> compiled as 32bits application).  Note that when using
> s2disk with 2.6.24, very similar picture is shown -
> that same "Sl" line.
> 
> The only noticeable changes in my config (x86-64 one)
> compared with the one from 2.6.23 is - I enabled tickless
> (dyntics) and high-res timers, CPU_IDLE and FAIR_CGROUP_SCHED.
> I recompiled the kernel without those options (on by one), --
> the effect on suspend is exactly the same.
> 
> Is there anything I can do to further diagnose this?

no_console_suspend (sp?), nohz=off, highres=off, and try with minimum
config.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/