[M68KNOMMU]: platform setup for 5307 ColdFire parts

[Greg Ungerer]

Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---


diff -Naurp linux-2.6.24/arch/m68knommu/platform/5307/config.c linux-2.6.24-uc0/arch/m68knommu/platform/5307/config.c
--- linux-2.6.24/arch/m68knommu/platform/5307/config.c	2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/5307/config.c	2008-01-11 13:37:38.000000000 +1000
@@ -13,11 +13,11 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/dma.h>
+#include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 #include <asm/mcfwdebug.h>
 
 /***************************************************************************/
@@ -38,17 +38,51 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-/*
- *	DMA channel base address table.
- */
-unsigned int   dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
-        MCF_MBAR + MCFDMA_BASE0,
-        MCF_MBAR + MCFDMA_BASE1,
-        MCF_MBAR + MCFDMA_BASE2,
-        MCF_MBAR + MCFDMA_BASE3,
+static struct mcf_platform_uart m5307_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= 73,
+	},
+	{
+		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= 74,
+	},
+	{ },
+};
+
+static struct platform_device m5307_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m5307_uart_platform,
 };
 
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+static struct platform_device *m5307_devices[] __initdata = {
+	&m5307_uart,
+};
+
+/***************************************************************************/
+
+static void __init m5307_uart_init_line(int line, int irq)
+{
+	if (line == 0) {
+		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
+		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+	} else if (line == 1) {
+		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
+		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+	}
+}
+
+static void __init m5307_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m5307_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m5307_uart_init_line(line, m5307_uart_platform[line].irq);
+}
 
 /***************************************************************************/
 
@@ -99,7 +133,7 @@ int mcf_timerirqpending(int timer)
 
 /***************************************************************************/
 
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
 
@@ -117,7 +151,7 @@ void config_BSP(char *commandp, int size
 
 	mach_reset = coldfire_reset;
 
-#ifdef MCF_BDM_DISABLE
+#ifdef CONFIG_BDM_DISABLE
 	/*
 	 * Disable the BDM clocking.  This also turns off most of the rest of
 	 * the BDM device.  This is good for EMC reasons. This option is not
@@ -128,3 +162,14 @@ void config_BSP(char *commandp, int size
 }
 
 /***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	m5307_uarts_init();
+	platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/