[git patches] libata updates
From: Jeff Garzik
Date: Fri Feb 01 2008 - 13:34:21 EST
The PCI change was ack'd by Greg...
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci.c | 2 +
drivers/ata/ata_piix.c | 10 +-
drivers/ata/pata_bf54x.c | 53 ++---
drivers/ata/pata_sl82c105.c | 33 +++-
drivers/ata/sata_mv.c | 486 +++++++++++++++++++++++++++----------------
drivers/ata/sata_nv.c | 18 +-
drivers/pci/pci.c | 3 +-
8 files changed, 389 insertions(+), 218 deletions(-)
Adrian Bunk (1):
ata_piix.c: make piix_merge_scr() static
Alan Cox (1):
pata_sl82c105: dual channel support
Bryan Wu (1):
Blackfin pata-bf54x driver: fix compiling bug - no ata_port struct in struct ata_device any more
Jason Gaston (2):
ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
Mark Lord (13):
sata_mv ncq EH fixes
sata_mv ncq Mask transient IRQs
sata_mv ncq Rename base to port mmio
sata_mv ncq Fix EDMA configuration
sata_mv ncq Add want ncq parameter for EDMA configuration
sata_mv ncq Use hqtag instead of ioid
sata_mv ncq Ignore response status LSB on NCQ
sata_mv ncq Restrict max sectors to 8-bits on GenII NCQ
sata_mv ncq Use DMA memory pools for hardware memory tables
sata_mv ncq Introduce per-tag SG tables
sata_mv ncq Enable NCQ operation
sata_mv ncq Remove post internal cmd op
sata_mv ncq Comments and version bump
Robert Hancock (1):
sata_nv: fix for completion handling
Saeed Bishara (1):
sata_mv: Remove PCI dependency
Sonic Zhang (3):
Blackfin pata-bf54x driver: Remove obsolete PM function
Blackfin pata-bf54x driver: Add debug information
Blackfin pata-bf54x driver: should cover all possible interrupt sources
Tejun Heo (1):
pci: allow multiple calls to pcim_enable_device()
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae19c9b..ba8f7f4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -69,7 +69,7 @@ config ATA_PIIX
config SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6f089b8..27c8d56 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -475,6 +475,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a65c8ae..47892e6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -267,6 +267,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (Tolapai) */
{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
@@ -1068,7 +1076,7 @@ static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val)
iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
}
-u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
+static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
{
u32 val = 0;
int i, mi;
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index a32e3c4..7f87f10 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -299,7 +299,7 @@ static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
*/
n6 = num_clocks_min(t6min, fsclk);
if (mode >= 0 && mode <= 4 && n6 >= 1) {
- pr_debug("set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
+ dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
/* calculate the timing values for register transfers. */
while (mode > 0 && pio_fsclk[mode] > fsclk)
mode--;
@@ -376,7 +376,7 @@ static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
mode = adev->dma_mode - XFER_UDMA_0;
if (mode >= 0 && mode <= 5) {
- pr_debug("set udmamode: mode=%d\n", mode);
+ dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode);
/* the most restrictive timing value is t6 and tc,
* the DIOW - data hold. If one SCLK pulse is longer
* than this minimum value then register
@@ -433,7 +433,7 @@ static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
mode = adev->dma_mode - XFER_MW_DMA_0;
if (mode >= 0 && mode <= 2) {
- pr_debug("set mdmamode: mode=%d\n", mode);
+ dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode);
/* the most restrictive timing value is tf, the DMACK to
* read data released. If one SCLK pulse is longer than
* this maximum value then the MDMA mode
@@ -697,7 +697,7 @@ static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal);
write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam);
write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah);
- pr_debug("hob: feat 0x%X nsect 0x%X, lba 0x%X "
+ dev_dbg(ap->dev, "hob: feat 0x%X nsect 0x%X, lba 0x%X "
"0x%X 0x%X\n",
tf->hob_feature,
tf->hob_nsect,
@@ -711,7 +711,7 @@ static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
write_atapi_register(base, ATA_REG_LBAL, tf->lbal);
write_atapi_register(base, ATA_REG_LBAM, tf->lbam);
write_atapi_register(base, ATA_REG_LBAH, tf->lbah);
- pr_debug("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ dev_dbg(ap->dev, "feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
tf->feature,
tf->nsect,
tf->lbal,
@@ -721,7 +721,7 @@ static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
if (tf->flags & ATA_TFLAG_DEVICE) {
write_atapi_register(base, ATA_REG_DEVICE, tf->device);
- pr_debug("device 0x%X\n", tf->device);
+ dev_dbg(ap->dev, "device 0x%X\n", tf->device);
}
ata_wait_idle(ap);
@@ -782,7 +782,7 @@ static void bfin_exec_command(struct ata_port *ap,
const struct ata_taskfile *tf)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- pr_debug("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+ dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
write_atapi_register(base, ATA_REG_CMD, tf->command);
ata_pause(ap);
@@ -834,7 +834,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
struct scatterlist *sg;
unsigned int si;
- pr_debug("in atapi dma setup\n");
+ dev_dbg(qc->ap->dev, "in atapi dma setup\n");
/* Program the ATA_CTRL register with dir */
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* fill the ATAPI DMA controller */
@@ -870,7 +870,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
struct scatterlist *sg;
unsigned int si;
- pr_debug("in atapi dma start\n");
+ dev_dbg(qc->ap->dev, "in atapi dma start\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return;
@@ -888,7 +888,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
sg_dma_address(sg) + sg_dma_len(sg));
}
enable_dma(CH_ATAPI_TX);
- pr_debug("enable udma write\n");
+ dev_dbg(qc->ap->dev, "enable udma write\n");
/* Send ATA DMA write command */
bfin_exec_command(ap, &qc->tf);
@@ -898,7 +898,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
| XFER_DIR));
} else {
enable_dma(CH_ATAPI_RX);
- pr_debug("enable udma read\n");
+ dev_dbg(qc->ap->dev, "enable udma read\n");
/* Send ATA DMA read command */
bfin_exec_command(ap, &qc->tf);
@@ -936,7 +936,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
struct scatterlist *sg;
unsigned int si;
- pr_debug("in atapi dma stop\n");
+ dev_dbg(qc->ap->dev, "in atapi dma stop\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return;
@@ -1147,15 +1147,15 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned short int_status = ATAPI_GET_INT_STATUS(base);
- if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) {
+ if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON))
host_stat |= ATA_DMA_ACTIVE;
- }
- if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) {
+ if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT|
+ ATAPI_DEV_INT))
host_stat |= ATA_DMA_INTR;
- }
- if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) {
- host_stat |= ATA_DMA_ERR;
- }
+ if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT))
+ host_stat |= ATA_DMA_ERR|ATA_DMA_INTR;
+
+ dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat);
return host_stat;
}
@@ -1213,8 +1213,7 @@ static void bfin_irq_clear(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- pr_debug("in atapi irq clear\n");
-
+ dev_dbg(ap->dev, "in atapi irq clear\n");
ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
@@ -1232,7 +1231,7 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 tmp;
- pr_debug("in atapi irq on\n");
+ dev_dbg(ap->dev, "in atapi irq on\n");
ap->ctl &= ~ATA_NIEN;
ap->last_ctl = ap->ctl;
@@ -1255,7 +1254,7 @@ static void bfin_bmdma_freeze(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- pr_debug("in atapi dma freeze\n");
+ dev_dbg(ap->dev, "in atapi dma freeze\n");
ap->ctl |= ATA_NIEN;
ap->last_ctl = ap->ctl;
@@ -1328,7 +1327,7 @@ static void bfin_error_handler(struct ata_port *ap)
static void bfin_port_stop(struct ata_port *ap)
{
- pr_debug("in atapi port stop\n");
+ dev_dbg(ap->dev, "in atapi port stop\n");
if (ap->udma_mask != 0 || ap->mwdma_mask != 0) {
free_dma(CH_ATAPI_RX);
free_dma(CH_ATAPI_TX);
@@ -1337,7 +1336,7 @@ static void bfin_port_stop(struct ata_port *ap)
static int bfin_port_start(struct ata_port *ap)
{
- pr_debug("in atapi port start\n");
+ dev_dbg(ap->dev, "in atapi port start\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return 0;
@@ -1373,10 +1372,6 @@ static struct scsi_host_template bfin_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations bfin_pata_ops = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 1388cef..81ef207 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
enum {
/*
@@ -206,6 +206,34 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
sl82c105_set_piomode(ap, qc->dev);
}
+/**
+ * sl82c105_qc_defer - implement serialization
+ * @qc: command
+ *
+ * We must issue one command per host not per channel because
+ * of the reset bug.
+ *
+ * Q: is the scsi host lock sufficient ?
+ */
+
+static int sl82c105_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_host *host = qc->ap->host;
+ struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+ int rc;
+
+ /* First apply the usual rules */
+ rc = ata_std_qc_defer(qc);
+ if (rc != 0)
+ return rc;
+
+ /* Now apply serialization rules. Only allow a command if the
+ other channel state machine is idle */
+ if (alt && alt->qc_active)
+ return ATA_DEFER_PORT;
+ return 0;
+}
+
static struct scsi_host_template sl82c105_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -245,6 +273,7 @@ static struct ata_port_operations sl82c105_port_ops = {
.bmdma_stop = sl82c105_bmdma_stop,
.bmdma_status = ata_bmdma_status,
+ .qc_defer = sl82c105_qc_defer,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -312,7 +341,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
};
/* for now use only the first port */
const struct ata_port_info *ppi[] = { &info_early,
- &ata_dummy_port_info };
+ NULL };
u32 val;
int rev;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7e72463..3c1b5c9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -29,7 +29,13 @@
I distinctly remember a couple workarounds (one related to PCI-X)
are still needed.
- 4) Add NCQ support (easy to intermediate, once new-EH support appears)
+ 2) Improve/fix IRQ and error handling sequences.
+
+ 3) ATAPI support (Marvell claims the 60xx/70xx chips can do it).
+
+ 4) Think about TCQ support here, and for libata in general
+ with controllers that suppport it via host-queuing hardware
+ (a software-only implementation could be a nightmare).
5) Investigate problems with PCI Message Signalled Interrupts (MSI).
@@ -53,8 +59,6 @@
Target mode, for those without docs, is the ability to directly
connect two SATA controllers.
- 13) Verify that 7042 is fully supported. I only have a 6042.
-
*/
@@ -73,7 +77,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.20"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -107,14 +111,12 @@ enum {
/* CRQB needs alignment on a 1KB boundary. Size == 1KB
* CRPB needs alignment on a 256B boundary. Size == 256B
- * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
* ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
*/
MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
- MV_MAX_SG_CT = 176,
+ MV_MAX_SG_CT = 256,
MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
- MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
MV_PORTS_PER_HC = 4,
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
@@ -125,6 +127,9 @@ enum {
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
+ /* SoC integrated controllers, no PCI interface */
+ MV_FLAG_SOC = (1 << 28),
+
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
ATA_FLAG_PIO_POLLING,
@@ -170,7 +175,7 @@ enum {
PCIE_IRQ_CAUSE_OFS = 0x1900,
PCIE_IRQ_MASK_OFS = 0x1910,
- PCIE_UNMASK_ALL_IRQS = 0x70a, /* assorted bits */
+ PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
HC_MAIN_IRQ_MASK_OFS = 0x1d64,
@@ -210,6 +215,7 @@ enum {
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
+ SATA_FIS_IRQ_CAUSE_OFS = 0x364,
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
PHY_MODE2 = 0x330,
@@ -222,11 +228,11 @@ enum {
/* Port registers */
EDMA_CFG_OFS = 0,
- EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
- EDMA_CFG_NCQ = (1 << 5),
- EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
- EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
- EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
+ EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -244,14 +250,33 @@ enum {
EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
+
EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
- EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15),
+ EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
+ EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
+
EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
+
EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
+ EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
+ EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
+ EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
+
EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
+
EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
EDMA_ERR_OVERRUN_5 = (1 << 5),
EDMA_ERR_UNDERRUN_5 = (1 << 6),
+
+ EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
+ EDMA_ERR_LNK_CTRL_RX_1 |
+ EDMA_ERR_LNK_CTRL_RX_3 |
+ EDMA_ERR_LNK_CTRL_TX,
+
EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON |
@@ -311,12 +336,14 @@ enum {
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
+ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
+#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
enum {
/* DMA boundary 0xffff is required by the s/g splitting
@@ -379,8 +406,8 @@ struct mv_port_priv {
dma_addr_t crqb_dma;
struct mv_crpb *crpb;
dma_addr_t crpb_dma;
- struct mv_sg *sg_tbl;
- dma_addr_t sg_tbl_dma;
+ struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
+ dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
unsigned int req_idx;
unsigned int resp_idx;
@@ -400,6 +427,14 @@ struct mv_host_priv {
u32 irq_cause_ofs;
u32 irq_mask_ofs;
u32 unmask_all_irqs;
+ /*
+ * These consistent DMA memory pools give us guaranteed
+ * alignment for hardware-accessed data structures,
+ * and less memory waste in accomplishing the alignment.
+ */
+ struct dma_pool *crqb_pool;
+ struct dma_pool *crpb_pool;
+ struct dma_pool *sg_tbl_pool;
};
struct mv_hw_ops {
@@ -411,7 +446,7 @@ struct mv_hw_ops {
int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
- void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
+ void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
};
static void mv_irq_clear(struct ata_port *ap);
@@ -425,10 +460,9 @@ static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
static void mv_error_handler(struct ata_port *ap);
-static void mv_post_int_cmd(struct ata_queued_cmd *qc);
static void mv_eh_freeze(struct ata_port *ap);
static void mv_eh_thaw(struct ata_port *ap);
-static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void mv6_dev_config(struct ata_device *dev);
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
@@ -438,7 +472,7 @@ static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
@@ -448,10 +482,17 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
+static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
+ void __iomem *port_mmio, int want_ncq);
+static int __mv_stop_dma(struct ata_port *ap);
+/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
+ * because we have to allow room for worst case splitting of
+ * PRDs for 64K boundaries in mv_fill_sg().
+ */
static struct scsi_host_template mv5_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -475,7 +516,8 @@ static struct scsi_host_template mv6_sht = {
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
+ .change_queue_depth = ata_scsi_change_queue_depth,
+ .can_queue = MV_MAX_Q_DEPTH - 1,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = MV_MAX_SG_CT / 2,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
@@ -505,7 +547,6 @@ static const struct ata_port_operations mv5_ops = {
.irq_on = ata_irq_on,
.error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
@@ -517,6 +558,7 @@ static const struct ata_port_operations mv5_ops = {
};
static const struct ata_port_operations mv6_ops = {
+ .dev_config = mv6_dev_config,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -533,9 +575,9 @@ static const struct ata_port_operations mv6_ops = {
.irq_on = ata_irq_on,
.error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
+ .qc_defer = ata_std_qc_defer,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
@@ -561,9 +603,9 @@ static const struct ata_port_operations mv_iie_ops = {
.irq_on = ata_irq_on,
.error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
+ .qc_defer = ata_std_qc_defer,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
@@ -592,26 +634,29 @@ static const struct ata_port_info mv_port_info[] = {
.port_ops = &mv5_ops,
},
{ /* chip_604x */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_608x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- MV_FLAG_DUAL_HC,
+ ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
@@ -648,13 +693,6 @@ static const struct pci_device_id mv_pci_tbl[] = {
{ } /* terminate list */
};
-static struct pci_driver mv_pci_driver = {
- .name = DRV_NAME,
- .id_table = mv_pci_tbl,
- .probe = mv_init_one,
- .remove = ata_pci_remove_one,
-};
-
static const struct mv_hw_ops mv5xxx_ops = {
.phy_errata = mv5_phy_errata,
.enable_leds = mv5_enable_leds,
@@ -674,45 +712,6 @@ static const struct mv_hw_ops mv6xxx_ops = {
};
/*
- * module options
- */
-static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
-
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
- int rc;
-
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
-
- return rc;
-}
-
-/*
* Functions
*/
@@ -815,19 +814,46 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
* LOCKING:
* Inherited from caller.
*/
-static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
- struct mv_port_priv *pp)
+static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
+ struct mv_port_priv *pp, u8 protocol)
{
+ int want_ncq = (protocol == ATA_PROT_NCQ);
+
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
+ if (want_ncq != using_ncq)
+ __mv_stop_dma(ap);
+ }
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ int hard_port = mv_hardport_from_port(ap->port_no);
+ void __iomem *hc_mmio = mv_hc_base_from_port(
+ ap->host->iomap[MV_PRIMARY_BAR], hard_port);
+ u32 hc_irq_cause, ipending;
+
/* clear EDMA event indicators, if any */
- writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* clear EDMA interrupt indicator, if any */
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ ipending = (DEV_IRQ << hard_port) |
+ (CRPB_DMA_DONE << hard_port);
+ if (hc_irq_cause & ipending) {
+ writelfl(hc_irq_cause & ~ipending,
+ hc_mmio + HC_IRQ_CAUSE_OFS);
+ }
+
+ mv_edma_cfg(pp, hpriv, port_mmio, want_ncq);
+
+ /* clear FIS IRQ Cause */
+ writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
- mv_set_edma_ptrs(base, hpriv, pp);
+ mv_set_edma_ptrs(port_mmio, hpriv, pp);
- writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
- WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
+ WARN_ON(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
}
/**
@@ -1003,38 +1029,76 @@ static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
return -EINVAL;
}
-static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
- void __iomem *port_mmio)
+static void mv6_dev_config(struct ata_device *adev)
{
- u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+ /*
+ * We don't have hob_nsect when doing NCQ commands on Gen-II.
+ * See mv_qc_prep() for more info.
+ */
+ if (adev->flags & ATA_DFLAG_NCQ)
+ if (adev->max_sectors > ATA_MAX_SECTORS)
+ adev->max_sectors = ATA_MAX_SECTORS;
+}
+
+static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
+ void __iomem *port_mmio, int want_ncq)
+{
+ u32 cfg;
/* set up non-NCQ EDMA configuration */
- cfg &= ~(1 << 9); /* disable eQue */
+ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
- if (IS_GEN_I(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
+ if (IS_GEN_I(hpriv))
cfg |= (1 << 8); /* enab config burst size mask */
- }
- else if (IS_GEN_II(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
+ else if (IS_GEN_II(hpriv))
cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
- cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
- }
else if (IS_GEN_IIE(hpriv)) {
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
cfg |= (1 << 18); /* enab early completion */
cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
- cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
- cfg &= ~(EDMA_CFG_NCQ); /* clear NCQ */
}
+ if (want_ncq) {
+ cfg |= EDMA_CFG_NCQ;
+ pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
+ } else
+ pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
+
writelfl(cfg, port_mmio + EDMA_CFG_OFS);
}
+static void mv_port_free_dma_mem(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ int tag;
+
+ if (pp->crqb) {
+ dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
+ pp->crqb = NULL;
+ }
+ if (pp->crpb) {
+ dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
+ pp->crpb = NULL;
+ }
+ /*
+ * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
+ * For later hardware, we have one unique sg_tbl per NCQ tag.
+ */
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (pp->sg_tbl[tag]) {
+ if (tag == 0 || !IS_GEN_I(hpriv))
+ dma_pool_free(hpriv->sg_tbl_pool,
+ pp->sg_tbl[tag],
+ pp->sg_tbl_dma[tag]);
+ pp->sg_tbl[tag] = NULL;
+ }
+ }
+}
+
/**
* mv_port_start - Port specific init/start routine.
* @ap: ATA channel to manipulate
@@ -1051,51 +1115,47 @@ static int mv_port_start(struct ata_port *ap)
struct mv_host_priv *hpriv = ap->host->private_data;
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
- void *mem;
- dma_addr_t mem_dma;
unsigned long flags;
- int rc;
+ int tag, rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
-
- mem = dmam_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
- GFP_KERNEL);
- if (!mem)
- return -ENOMEM;
- memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
+ ap->private_data = pp;
rc = ata_pad_alloc(ap, dev);
if (rc)
return rc;
- /* First item in chunk of DMA memory:
- * 32-slot command request table (CRQB), 32 bytes each in size
- */
- pp->crqb = mem;
- pp->crqb_dma = mem_dma;
- mem += MV_CRQB_Q_SZ;
- mem_dma += MV_CRQB_Q_SZ;
+ pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
+ if (!pp->crqb)
+ return -ENOMEM;
+ memset(pp->crqb, 0, MV_CRQB_Q_SZ);
- /* Second item:
- * 32-slot command response table (CRPB), 8 bytes each in size
- */
- pp->crpb = mem;
- pp->crpb_dma = mem_dma;
- mem += MV_CRPB_Q_SZ;
- mem_dma += MV_CRPB_Q_SZ;
+ pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
+ if (!pp->crpb)
+ goto out_port_free_dma_mem;
+ memset(pp->crpb, 0, MV_CRPB_Q_SZ);
- /* Third item:
- * Table of scatter-gather descriptors (ePRD), 16 bytes each
+ /*
+ * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
+ * For later hardware, we need one unique sg_tbl per NCQ tag.
*/
- pp->sg_tbl = mem;
- pp->sg_tbl_dma = mem_dma;
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (tag == 0 || !IS_GEN_I(hpriv)) {
+ pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
+ GFP_KERNEL, &pp->sg_tbl_dma[tag]);
+ if (!pp->sg_tbl[tag])
+ goto out_port_free_dma_mem;
+ } else {
+ pp->sg_tbl[tag] = pp->sg_tbl[0];
+ pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
+ }
+ }
spin_lock_irqsave(&ap->host->lock, flags);
- mv_edma_cfg(ap, hpriv, port_mmio);
-
+ mv_edma_cfg(pp, hpriv, port_mmio, 0);
mv_set_edma_ptrs(port_mmio, hpriv, pp);
spin_unlock_irqrestore(&ap->host->lock, flags);
@@ -1104,8 +1164,11 @@ static int mv_port_start(struct ata_port *ap)
* we'll be unable to send non-data, PIO, etc due to restricted access
* to shadow regs.
*/
- ap->private_data = pp;
return 0;
+
+out_port_free_dma_mem:
+ mv_port_free_dma_mem(ap);
+ return -ENOMEM;
}
/**
@@ -1120,6 +1183,7 @@ static int mv_port_start(struct ata_port *ap)
static void mv_port_stop(struct ata_port *ap)
{
mv_stop_dma(ap);
+ mv_port_free_dma_mem(ap);
}
/**
@@ -1138,7 +1202,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
struct mv_sg *mv_sg, *last_sg = NULL;
unsigned int si;
- mv_sg = pp->sg_tbl;
+ mv_sg = pp->sg_tbl[qc->tag];
for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
@@ -1194,7 +1258,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
u16 flags = 0;
unsigned in_index;
- if (qc->tf.protocol != ATA_PROT_DMA)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
/* Fill in command request block
@@ -1203,15 +1268,14 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- flags |= qc->tag << CRQB_IOID_SHIFT; /* 50xx appears to ignore this*/
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
pp->crqb[in_index].sg_addr =
- cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
pp->crqb[in_index].sg_addr_hi =
- cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
@@ -1231,13 +1295,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
case ATA_CMD_WRITE_FUA_EXT:
mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
break;
-#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
case ATA_CMD_FPDMA_READ:
case ATA_CMD_FPDMA_WRITE:
mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
break;
-#endif /* FIXME: remove this line when NCQ added */
default:
/* The only other commands EDMA supports in non-queued and
* non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
@@ -1286,7 +1348,8 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
unsigned in_index;
u32 flags = 0;
- if (qc->tf.protocol != ATA_PROT_DMA)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
/* Fill in Gen IIE command request block
@@ -1296,15 +1359,14 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- flags |= qc->tag << CRQB_IOID_SHIFT; /* "I/O Id" is -really-
- what we use as our tag */
+ flags |= qc->tag << CRQB_HOSTQ_SHIFT;
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
- crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
tf = &qc->tf;
@@ -1351,10 +1413,10 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
- struct mv_host_priv *hpriv = ap->host->private_data;
u32 in_index;
- if (qc->tf.protocol != ATA_PROT_DMA) {
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ)) {
/* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
@@ -1363,13 +1425,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
return ata_qc_issue_prot(qc);
}
- mv_start_dma(port_mmio, hpriv, pp);
-
- in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
-
- /* until we do queuing, the queue should be empty at this point */
- WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
pp->req_idx++;
@@ -1437,6 +1493,7 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
ata_ehi_hotplugged(ehi);
ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
"dev disconnect" : "dev connect");
+ action |= ATA_EH_HARDRESET;
}
if (IS_GEN_I(hpriv)) {
@@ -1465,7 +1522,7 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
}
/* Clear EDMA now that SERR cleanup done */
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
if (!err_mask) {
err_mask = AC_ERR_OTHER;
@@ -1538,23 +1595,17 @@ static void mv_intr_edma(struct ata_port *ap)
* support for queueing. this works transparently for
* queued and non-queued modes.
*/
- else if (IS_GEN_II(hpriv))
- tag = (le16_to_cpu(pp->crpb[out_index].id)
- >> CRPB_IOID_SHIFT_6) & 0x3f;
-
- else /* IS_GEN_IIE */
- tag = (le16_to_cpu(pp->crpb[out_index].id)
- >> CRPB_IOID_SHIFT_7) & 0x3f;
+ else
+ tag = le16_to_cpu(pp->crpb[out_index].id) & 0x1f;
qc = ata_qc_from_tag(ap, tag);
- /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
- * bits (WARNING: might not necessarily be associated
- * with this command), which -should- be clear
- * if all is well
+ /* For non-NCQ mode, the lower 8 bits of status
+ * are from EDMA_ERR_IRQ_CAUSE_OFS,
+ * which should be zero if all went well.
*/
status = le16_to_cpu(pp->crpb[out_index].flags);
- if (unlikely(status & 0xff)) {
+ if ((status & 0xff) && !(pp->pp_flags & MV_PP_FLAG_NCQ_EN)) {
mv_err_intr(ap, qc);
return;
}
@@ -1715,20 +1766,21 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
struct ata_host *host = dev_instance;
unsigned int hc, handled = 0, n_hcs;
void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- u32 irq_stat;
+ u32 irq_stat, irq_mask;
+ spin_lock(&host->lock);
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
+ irq_mask = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
/* check the cases where we either have nothing pending or have read
* a bogus register value which can indicate HW removal or PCI fault
*/
- if (!irq_stat || (0xffffffffU == irq_stat))
- return IRQ_NONE;
+ if (!(irq_stat & irq_mask) || (0xffffffffU == irq_stat))
+ goto out_unlock;
n_hcs = mv_get_hc_count(host->ports[0]->flags);
- spin_lock(&host->lock);
- if (unlikely(irq_stat & PCI_ERR)) {
+ if (unlikely((irq_stat & PCI_ERR) && HAS_PCI(host))) {
mv_pci_error(host, mmio);
handled = 1;
goto out_unlock; /* skip all other HC irq handling */
@@ -1799,8 +1851,9 @@ static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
return -EINVAL;
}
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
int early_5080;
early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
@@ -1811,7 +1864,7 @@ static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
}
- mv_reset_pci_bus(pdev, mmio);
+ mv_reset_pci_bus(host, mmio);
}
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
@@ -1935,9 +1988,8 @@ static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
#undef ZERO
#define ZERO(reg) writel(0, mmio + (reg))
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct mv_host_priv *hpriv = host->private_data;
u32 tmp;
@@ -2329,11 +2381,6 @@ static void mv_error_handler(struct ata_port *ap)
mv_hardreset, mv_postreset);
}
-static void mv_post_int_cmd(struct ata_queued_cmd *qc)
-{
- mv_stop_dma(qc->ap);
-}
-
static void mv_eh_freeze(struct ata_port *ap)
{
void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
@@ -2427,8 +2474,8 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* unmask all EDMA error interrupts */
- writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+ /* unmask all non-transient EDMA error interrupts */
+ writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
readl(port_mmio + EDMA_CFG_OFS),
@@ -2586,7 +2633,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
static int mv_init_host(struct ata_host *host, unsigned int board_idx)
{
int rc = 0, n_hc, port, hc;
- struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
struct mv_host_priv *hpriv = host->private_data;
@@ -2607,7 +2653,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
goto done;
hpriv->ops->reset_flash(hpriv, mmio);
- hpriv->ops->reset_bus(pdev, mmio);
+ hpriv->ops->reset_bus(host, mmio);
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < host->n_ports; port++) {
@@ -2630,8 +2676,10 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
mv_port_init(&ap->ioaddr, port_mmio);
+#ifdef CONFIG_PCI
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+#endif
}
for (hc = 0; hc < n_hc; hc++) {
@@ -2668,6 +2716,55 @@ done:
return rc;
}
+#ifdef CONFIG_PCI
+static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+static struct pci_driver mv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mv_pci_tbl,
+ .probe = mv_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+
+ return rc;
+}
+
/**
* mv_print_info - Dump key info to kernel log for perusal.
* @host: ATA host to print info about
@@ -2710,6 +2807,26 @@ static void mv_print_info(struct ata_host *host)
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
+static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
+{
+ hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
+ MV_CRQB_Q_SZ, 0);
+ if (!hpriv->crqb_pool)
+ return -ENOMEM;
+
+ hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
+ MV_CRPB_Q_SZ, 0);
+ if (!hpriv->crpb_pool)
+ return -ENOMEM;
+
+ hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
+ MV_SG_TBL_SZ, 0);
+ if (!hpriv->sg_tbl_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
/**
* mv_init_one - handle a positive probe of a Marvell host
* @pdev: PCI device found
@@ -2755,6 +2872,10 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
/* initialize adapter */
rc = mv_init_host(host, board_idx);
if (rc)
@@ -2772,15 +2893,22 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
}
+#endif
static int __init mv_init(void)
{
- return pci_register_driver(&mv_pci_driver);
+ int rc = -ENODEV;
+#ifdef CONFIG_PCI
+ rc = pci_register_driver(&mv_pci_driver);
+#endif
+ return rc;
}
static void __exit mv_exit(void)
{
+#ifdef CONFIG_PCI
pci_unregister_driver(&mv_pci_driver);
+#endif
}
MODULE_AUTHOR("Brett Russ");
@@ -2789,8 +2917,10 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+#ifdef CONFIG_PCI
module_param(msi, int, 0444);
MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
module_init(mv_init);
module_exit(mv_exit);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index a0f98fd..bfe92a4 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1011,14 +1011,20 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
}
if (status & (NV_ADMA_STAT_DONE |
- NV_ADMA_STAT_CPBERR)) {
- u32 check_commands;
+ NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_CMD_COMPLETE)) {
+ u32 check_commands = notifier_clears[i];
int pos, error = 0;
- if (ata_tag_valid(ap->link.active_tag))
- check_commands = 1 << ap->link.active_tag;
- else
- check_commands = ap->link.sactive;
+ if (status & NV_ADMA_STAT_CPBERR) {
+ /* Check all active commands */
+ if (ata_tag_valid(ap->link.active_tag))
+ check_commands = 1 <<
+ ap->link.active_tag;
+ else
+ check_commands = ap->
+ link.sactive;
+ }
/** Check CPBs for completed commands */
while ((pos = ffs(check_commands)) && !error) {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 71d561f..7d4ce90 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -823,7 +823,8 @@ int pcim_enable_device(struct pci_dev *pdev)
dr = get_pci_dr(pdev);
if (unlikely(!dr))
return -ENOMEM;
- WARN_ON(!!dr->enabled);
+ if (dr->enabled)
+ return 0;
rc = pci_enable_device(pdev);
if (!rc) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/