[git patches] IDE updates part #3
From: Bartlomiej Zolnierkiewicz
Date: Fri Feb 01 2008 - 17:40:09 EST
IDE updates continued...
* ide-cd rewrite (fix few bugs, unify IRQ handlers, re-organize handling
of quirky devices, move verbose error logging / cdrom.c IOCTLs support
to separate files, remove duplicated/dead code and other improvements)
* switch IDE to use generic DMA-mapping API
* IDE probing code revamp
* trm290 host driver fixes
* amd74xx host driver cleanup
* misc stuff
[ + this update shrinks code under drivers/ide/ by almost 1400 LOC :) ]
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
Documentation/ide/ChangeLog.ide-cd.1994-2004 | 268 +++
Documentation/ide/ChangeLog.ide-floppy.1996-2002 | 63 +
drivers/cdrom/cdrom.c | 6 -
drivers/ide/Kconfig | 55 +-
drivers/ide/Makefile | 4 +-
drivers/ide/arm/bast-ide.c | 3 +-
drivers/ide/arm/icside.c | 50 +-
drivers/ide/arm/rapide.c | 6 +-
drivers/ide/cris/ide-cris.c | 3 +-
drivers/ide/h8300/ide-h8300.c | 1 -
drivers/ide/ide-acpi.c | 1 -
drivers/ide/ide-cd.c | 2333 +++++-----------------
drivers/ide/ide-cd.h | 706 +------
drivers/ide/ide-cd_ioctl.c | 475 +++++
drivers/ide/ide-cd_verbose.c | 359 ++++
drivers/ide/ide-disk.c | 11 +-
drivers/ide/ide-dma.c | 110 +-
drivers/ide/ide-floppy.c | 122 +--
drivers/ide/ide-io.c | 2 +-
drivers/ide/ide-iops.c | 4 +-
drivers/ide/ide-lib.c | 6 +-
drivers/ide/ide-pnp.c | 2 -
drivers/ide/ide-probe.c | 190 +-
drivers/ide/ide-proc.c | 2 -
drivers/ide/ide-scan-pci.c | 9 +-
drivers/ide/ide-tape.c | 80 +-
drivers/ide/ide-taskfile.c | 12 +-
drivers/ide/ide-timing.h | 2 -
drivers/ide/ide.c | 116 +-
drivers/ide/legacy/ali14xx.c | 2 -
drivers/ide/legacy/buddha.c | 2 +-
drivers/ide/legacy/dtc2278.c | 2 -
drivers/ide/legacy/falconide.c | 3 +-
drivers/ide/legacy/gayle.c | 2 +-
drivers/ide/legacy/ht6560b.c | 2 -
drivers/ide/legacy/ide-cs.c | 2 -
drivers/ide/legacy/ide_platform.c | 34 +-
drivers/ide/legacy/macide.c | 2 +-
drivers/ide/legacy/q40ide.c | 2 +-
drivers/ide/legacy/qd65xx.c | 2 -
drivers/ide/legacy/qd65xx.h | 2 -
drivers/ide/legacy/umc8672.c | 2 -
drivers/ide/mips/au1xxx-ide.c | 43 +-
drivers/ide/pci/aec62xx.c | 11 +-
drivers/ide/pci/alim15x3.c | 20 +-
drivers/ide/pci/amd74xx.c | 281 ++--
drivers/ide/pci/atiixp.c | 11 +-
drivers/ide/pci/cmd640.c | 2 -
drivers/ide/pci/cmd64x.c | 20 +-
drivers/ide/pci/cs5520.c | 2 +-
drivers/ide/pci/cs5530.c | 2 -
drivers/ide/pci/cs5535.c | 6 +-
drivers/ide/pci/cy82c693.c | 7 +-
drivers/ide/pci/delkin_cb.c | 4 +-
drivers/ide/pci/generic.c | 5 +-
drivers/ide/pci/hpt34x.c | 6 +-
drivers/ide/pci/hpt366.c | 33 +-
drivers/ide/pci/it8213.c | 7 +-
drivers/ide/pci/it821x.c | 50 +-
drivers/ide/pci/jmicron.c | 2 +-
drivers/ide/pci/ns87415.c | 20 +-
drivers/ide/pci/opti621.c | 2 -
drivers/ide/pci/pdc202xx_new.c | 6 +-
drivers/ide/pci/pdc202xx_old.c | 17 +-
drivers/ide/pci/piix.c | 55 +-
drivers/ide/pci/rz1000.c | 4 +-
drivers/ide/pci/sc1200.c | 14 +-
drivers/ide/pci/scc_pata.c | 13 +-
drivers/ide/pci/serverworks.c | 24 +-
drivers/ide/pci/sgiioc4.c | 19 +-
drivers/ide/pci/siimage.c | 53 +-
drivers/ide/pci/sis5513.c | 24 +-
drivers/ide/pci/sl82c105.c | 19 +-
drivers/ide/pci/slc90e66.c | 9 +-
drivers/ide/pci/tc86c001.c | 5 +-
drivers/ide/pci/triflex.c | 4 +-
drivers/ide/pci/trm290.c | 65 +-
drivers/ide/pci/via82cxxx.c | 15 +-
drivers/ide/ppc/mpc8xx.c | 2 -
drivers/ide/ppc/pmac.c | 39 +-
drivers/ide/setup-pci.c | 94 +-
drivers/scsi/ide-scsi.c | 5 +-
include/asm-mips/mach-au1x00/au1xxx_ide.h | 1 -
include/linux/cdrom.h | 14 +
include/linux/hdsmart.h | 2 +
include/linux/ide.h | 40 +-
86 files changed, 2549 insertions(+), 3588 deletions(-)
create mode 100644 Documentation/ide/ChangeLog.ide-cd.1994-2004
create mode 100644 Documentation/ide/ChangeLog.ide-floppy.1996-2002
create mode 100644 drivers/ide/ide-cd_ioctl.c
create mode 100644 drivers/ide/ide-cd_verbose.c
Adrian Bunk (4):
ide: unexport ide_dma_on
ide: small ide-scan-pci.c cleanup
ide: make wait_drive_not_busy() static again
ide/ppc/pmac.c section fixes
Bartlomiej Zolnierkiewicz (90):
ide-cd: use xfer_func_t in cdrom_pc_intr()
ide-cd: add ide_cd_pad_transfer() helper
ide-cd: fix "missing data" handling in cdrom_pc_intr()
ide-cd: fix DMA error handling in cdrom_newpc_intr()
ide-cd: fix trailing whitespaces in changelog
ide-cd: move historical changelog to Documentation/ide/ChangeLog.ide-cd.1994-2004
ide-cd: remove stale cdrom_transfer_packet_command() comment
ide-cd: remove unused defines from ide-cd.h
ide-cd: remove dead code from cdrom_pc_intr()
ide-cd: remove unused struct atapi_cdrom_subchnl
ide-cd: remove needless zeroing of 'info' fields from ide_cdrom_setup()
ide-cd: remove unused and write-only struct ide_cd_config_flags fields
ide-cd: remove struct atapi_{mechstat_header,changer_info,slot}
ide-cd: cleanup ide_cdrom_update_speed()
ide-cd: add IDE_CD_CAPABILITIES define
ide-cd: remove redundant config flags
ide-cd: kill CDROM_CONFIG_FLAGS() macro
ide-cd: kill CDROM_STATE_FLAGS() macro
ide-cd: remove struct atapi_capabilities_page (take 2)
ide-cd: remove struct ide_cd_{config,state}_flags
ide-cd: remove NO_DOOR_LOCKING define
ide-cd: remove STANDARD_ATAPI define
ide-cd: use BCD2BIN()/BIN2BCD() macros from <linux/bcd.h>
ide-cd: re-organize handling of quirky devices
ide-cd: remove duplicate sense keys definitions from ide-cd.h
ide-cd: coding style fixes for VERBOSE_IDE_CD_ERRORS code
ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c
ide-cd: factor out ioctl handlers from ide_cdrom_audio_ioctl()
ide-cd: merge cdrom_play_audio() into ide_cd_fake_play_trkind()
ide-cd: merge cdrom_read_subchannel() into ide_cdrom_get_mcn()
ide-cd: merge cdrom_select_speed() into ide_cdrom_select_speed()
ide-cd: move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>
ide-cd: coding style fixes for cdrom_get_toc_entry()
ide-cd: rename cdrom_* functions to ide_cd_*
ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.c
ide-cd: remove BUG_ON() from cdrom_newpc_intr()
ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_newpc_intr()
ide-cd: factor out request sense fixup from cdrom_pc_intr()
ide-cd: unify request end exit path in cdrom_pc_intr()
ide-cd: merge cdrom_pc_intr() and cdrom_newpc_intr()
ide-cd: remove cdrom_do_pc_continuation()
ide-cd: merge cdrom_do_packet_command() and cdrom_do_block_pc()
ide-cd: add ide_cd_drain_data() helper
ide-cd: factor out transfer size checking from cdrom_read_intr()
ide-cd: merge cdrom_read_intr() and cdrom_write_intr()
ide-cd: merge cdrom_start_read_continuation() and cdrom_start_rw_cont()
ide-cd: merge cdrom_start_read() and cdrom_start_write()
ide-cd: unify moving to the next buffer in cdrom_rw_intr()
ide-cd: prepare cdrom_rw_intr() and cdrom_newpc_intr() to be merged
ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_rw_intr()
ide-cd: merge cdrom_rw_intr() and cdrom_newpc_intr()
ide-cd: merge cdrom_write_check_ireason() and cdrom_read_check_ireason()
ide-cd: unify request end exit path in cdrom_decode_status()
ide-cd: update driver version, comments and copyrights
ide: add ide_dump_identify() debug helper
ide-{floppy,tape}: remove debug code for dumping identify data
amd74xx: remove amd_ide_chips table
ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag
ide: add IDE_HFLAG_NO_DSC host flag
piix: remove stale comments
ide: fix ide_intr() for non-PCI devices and CONFIG_BLK_DEV_IDEPCI=y
ide: remove BUG_ON() from ide_build_sglist()
ide: use ide_destroy_dmatable() instead of pci_unmap_sg() (take 2)
ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t
au1xxx-ide: use hwif->dev
icside: use hwif->dev
ide: switch to DMA-mapping API
ide: use ide_build_sglist() and ide_destroy_dmatable() in non-PCI host drivers
au1xxx-ide: device tree bugfix
ide-pmac: macio resource freeing bugfix
au1xxx-ide/rapide: use hwif->index for ide_unregister()
ide: delete filenames/versions from comments
ide: update/add my Copyrights
ide: don't include <linux/hdsmart.h>
<linux/hdsmart.h> is not used by kernel code
ide: fix handling of busy I/O resources in probe_hwif()
ide: move wait_hwif_ready() documentation in the right place
ide: remove hwif->present manipulations from hwif_init()
ide_platform: remove struct hwif_prop
ide: remove unused ide_hwgroup_t fields
ide: remove needless zeroing of hwgroup fields from init_irq()
ide: cleanup ide_system_bus_speed()
ide: I/O resources are released too early in ide_unregister()
ide: factor out code removing port from hwgroup from ide_unregister()
ide: prepare init_irq() for using ide_remove_port_from_hwgroup()
ide: use ide_remove_port_from_hwgroup in init_irq()
ide: make probe_hwif() return an error value
ide: move handling of I/O resources out of ide_probe_port()
ide: factor out code for tuning devices from ide_probe_port()
ide: move hwif_register() call out of ide_probe_port()
Borislav Petkov (2):
ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c
ide-floppy: cleanup header
Frans Pop (1):
ide/Kconfig: use 'on-board' instead of 'built-in' in config options
Geert Uytterhoeven (1):
Atari Falcon IDE: Add missing hwif variable
Sergei Shtylyov (2):
trm290: cannot call ide_setup_dma()
ide: ide_setup_dma() assumes 8 ports
diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004
new file mode 100644
index 0000000..190d17b
--- /dev/null
+++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004
@@ -0,0 +1,268 @@
+/*
+ * 1.00 Oct 31, 1994 -- Initial version.
+ * 1.01 Nov 2, 1994 -- Fixed problem with starting request in
+ * cdrom_check_status.
+ * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
+ * (from mlord) -- minor changes to cdrom_setup()
+ * -- renamed ide_dev_s to ide_drive_t, enable irq on command
+ * 2.00 Nov 27, 1994 -- Generalize packet command interface;
+ * add audio ioctls.
+ * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
+ * which send an interrupt when ready for a command.
+ * 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
+ * Don't use SCMD_PLAYAUDIO_TI; it's not included
+ * in the current version of ATAPI.
+ * Try to use LBA instead of track or MSF addressing
+ * when possible.
+ * Don't wait for READY_STAT.
+ * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
+ * other than 2k and to move multiple sectors in a
+ * single transaction.
+ * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
+ * Thanks to Nick Saw <cwsaw@xxxxxxxxxxxxxxxx> for
+ * help in figuring this out. Ditto for Acer and
+ * Aztech drives, which seem to have the same problem.
+ * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
+ * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
+ * or data protect error.
+ * Use HWIF and DEV_HWIF macros as in ide.c.
+ * Always try to do a request_sense after
+ * a failed command.
+ * Include an option to give textual descriptions
+ * of ATAPI errors.
+ * Fix a bug in handling the sector cache which
+ * showed up if the drive returned data in 512 byte
+ * blocks (like Pioneer drives). Thanks to
+ * Richard Hirst <srh@xxxxxxxxx> for diagnosing this.
+ * Properly supply the page number field in the
+ * MODE_SELECT command.
+ * PLAYAUDIO12 is broken on the Aztech; work around it.
+ * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
+ * (my apologies to Scott, but now ide-cd.c is independent)
+ * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
+ * Implement CDROMREADAUDIO ioctl (UNTESTED).
+ * Use input_ide_data() and output_ide_data().
+ * Add door locking.
+ * Fix usage count leak in cdrom_open, which happened
+ * when a read-write mount was attempted.
+ * Try to load the disk on open.
+ * Implement CDROMEJECT_SW ioctl (off by default).
+ * Read total cdrom capacity during open.
+ * Rearrange logic in cdrom_decode_status. Issue
+ * request sense commands for failed packet commands
+ * from here instead of from cdrom_queue_packet_command.
+ * Fix a race condition in retrieving error information.
+ * Suppress printing normal unit attention errors and
+ * some drive not ready errors.
+ * Implement CDROMVOLREAD ioctl.
+ * Implement CDROMREADMODE1/2 ioctls.
+ * Fix race condition in setting up interrupt handlers
+ * when the `serialize' option is used.
+ * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
+ * cdrom_queue_request.
+ * Another try at using ide_[input,output]_data.
+ * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
+ * Make VERBOSE_IDE_CD_ERRORS dump failed command again.
+ * Dump out more information for ILLEGAL REQUEST errs.
+ * Fix handling of errors occurring before the
+ * packet command is transferred.
+ * Fix transfers with odd bytelengths.
+ * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
+ * `DCI-2S10' drives are broken too.
+ * 3.04 Nov 20, 1995 -- So are Vertos drives.
+ * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
+ * 3.06 Dec 16, 1995 -- Add support needed for partitions.
+ * More workarounds for Vertos bugs (based on patches
+ * from Holger Dietze <dietze@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>).
+ * Try to eliminate byteorder assumptions.
+ * Use atapi_cdrom_subchnl struct definition.
+ * Add STANDARD_ATAPI compilation option.
+ * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
+ * Vertos 300.
+ * Add NO_DOOR_LOCKING configuration option.
+ * Handle drive_cmd requests w/NULL args (for hdparm -t).
+ * Work around sporadic Sony55e audio play problem.
+ * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
+ * problem with "hde=cdrom" with no drive present. -ml
+ * 3.08 Mar 6, 1996 -- More Vertos workarounds.
+ * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
+ * Switch to using MSF addressing for audio commands.
+ * Reformat to match kernel tabbing style.
+ * Add CDROM_GET_UPC ioctl.
+ * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
+ * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt <heiko@xxxxxxxxxxxxxxxxxx>
+ * to remove redundant verify_area calls.
+ * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
+ * from Gerhard Zuber <zuber@xxxxxxxxxxxxxxx>.
+ * Let open succeed even if there's no loaded disc.
+ * 3.13 May 19, 1996 -- Fixes for changer code.
+ * 3.14 May 29, 1996 -- Add work-around for Vertos 600.
+ * (From Hennus Bergman <hennus@xxxxxxxxx>.)
+ * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
+ * from Ben Galliart <bgallia@xxxxxxx> with
+ * special help from Jeff Lightfoot
+ * <jeffml@xxxxxxxxx>
+ * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
+ * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
+ * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
+ * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
+ * 3.18 Oct 31, 1996 -- Added module and DMA support.
+ *
+ * 4.00 Nov 5, 1996 -- New ide-cd maintainer,
+ * Erik B. Andersen <andersee@xxxxxxxxxx>
+ * -- Newer Creative drives don't always set the error
+ * register correctly. Make sure we see media changes
+ * regardless.
+ * -- Integrate with generic cdrom driver.
+ * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
+ * a patch from Ciro Cattuto <>.
+ * -- Call set_device_ro.
+ * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
+ * ioctls, based on patch by Erik Andersen
+ * -- Add some probes of drive capability during setup.
+ *
+ * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
+ * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
+ * ioctls in favor of a generalized approach
+ * using the generic cdrom driver.
+ * -- Fully integrated with the 2.1.X kernel.
+ * -- Other stuff that I forgot (lots of changes)
+ *
+ * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * to fix the drive door locking problems.
+ *
+ * 4.03 Dec 04, 1996 -- Added DSC overlap support.
+ * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
+ * by Ales Makarov (xmakarov@xxxxxxxxxxxxxxxx)
+ *
+ * 4.05 Nov 20, 1997 -- Modified to print more drive info on init
+ * Minor other changes
+ * Fix errors on CDROMSTOP (If you have a "Dolphin",
+ * you must define IHAVEADOLPHIN)
+ * Added identifier so new Sanyo CD-changer works
+ * Better detection if door locking isn't supported
+ *
+ * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
+ * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
+ * 4.08 Dec 18, 1997 -- spew less noise when tray is empty
+ * -- fix speed display for ACER 24X, 18X
+ * 4.09 Jan 04, 1998 -- fix handling of the last block so we return
+ * an end of file instead of an I/O error (Gadi)
+ * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
+ * slot when there is no disc in the current slot.
+ * -- Fixed a memory leak where info->changer_info was
+ * malloc'ed but never free'd when closing the device.
+ * -- Cleaned up the global namespace a bit by making more
+ * functions static that should already have been.
+ * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
+ * based on a patch for 2.0.33 by Jelle Foks
+ * <jelle@xxxxxxxxxxxxxxxxxxxx>, a patch for 2.0.33
+ * by Toni Giorgino <toni@xxxxxxxxxxxxxxxxx>, the SCSI
+ * version, and my own efforts. -erik
+ * -- Fixed a stupid bug which egcs was kind enough to
+ * inform me of where "Illegal mode for this track"
+ * was never returned due to a comparison on data
+ * types of limited range.
+ * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
+ * now set ionly for CD-R and CD-RW drives. I had
+ * removed this support because it produced errors.
+ * It produced errors _only_ for non-writers. duh.
+ * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
+ * messages, since this is not an error.
+ * -- Change error messages to be const
+ * -- Remove a "\t" which looks ugly in the syslogs
+ * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
+ * since the .pdf version doesn't seem to work...
+ * -- Updated the TODO list to something more current.
+ *
+ * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
+ * patch thanks to "Eddie C. Dost" <ecd@xxxxxxxxx>
+ *
+ * 4.50 Oct 19, 1998 -- New maintainers!
+ * Jens Axboe <axboe@xxxxxxxx>
+ * Chris Zwilling <chris@xxxxxxxxxxxx>
+ *
+ * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@xxxxxxxx>
+ * - ide_cdrom_reset enabled since the ide subsystem
+ * handles resets fine now. <axboe@xxxxxxxx>
+ * - Transfer size fix for Samsung CD-ROMs, thanks to
+ * "Ville Hallik" <ville.hallik@xxxxxxx>.
+ * - other minor stuff.
+ *
+ * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@xxxxxxxx>
+ * - Detect DVD-ROM/RAM drives
+ *
+ * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
+ * drive in transfer size limit.
+ * - Fix the I/O error when doing eject without a medium
+ * loaded on some drives.
+ * - CDROMREADMODE2 is now implemented through
+ * CDROMREADRAW, since many drives don't support
+ * MODE2 (even though ATAPI 2.6 says they must).
+ * - Added ignore parameter to ide-cd (as a module), eg
+ * insmod ide-cd ignore='hda hdb'
+ * Useful when using ide-cd in conjunction with
+ * ide-scsi. TODO: non-modular way of doing the
+ * same.
+ *
+ * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
+ * packet interface to cdrom.c.
+ * - Unified audio ioctl support, most of it.
+ * - cleaned up various deprecated verify_area().
+ * - Added ide_cdrom_packet() as the interface for
+ * the Uniform generic_packet().
+ * - bunch of other stuff, will fill in logs later.
+ * - report 1 slot for non-changers, like the other
+ * cd-rom drivers. don't report select disc for
+ * non-changers as well.
+ * - mask out audio playing, if the device can't do it.
+ *
+ * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
+ * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
+ * use this independently of the actual audio handling.
+ * They will disappear later when I get the time to
+ * do it cleanly.
+ * - Minimize the TOC reading - only do it when we
+ * know a media change has occurred.
+ * - Moved all the CDROMREADx ioctls to the Uniform layer.
+ * - Heiko Eißfeldt <heiko@xxxxxxxxxxxxxxxxxx> supplied
+ * some fixes for CDI.
+ * - CD-ROM leaving door locked fix from Andries
+ * Brouwer <Andries.Brouwer@xxxxxx>
+ * - Erik Andersen <andersen@xxxxxxxxxxxx> unified
+ * commands across the various drivers and how
+ * sense errors are handled.
+ *
+ * 4.56 Sep 12, 1999 - Removed changer support - it is now in the
+ * Uniform layer.
+ * - Added partition based multisession handling.
+ * - Mode sense and mode select moved to the
+ * Uniform layer.
+ * - Fixed a problem with WPI CDS-32X drive - it
+ * failed the capabilities
+ *
+ * 4.57 Apr 7, 2000 - Fixed sense reporting.
+ * - Fixed possible oops in ide_cdrom_get_last_session()
+ * - Fix locking mania and make ide_cdrom_reset relock
+ * - Stop spewing errors to log when magicdev polls with
+ * TEST_UNIT_READY on some drives.
+ * - Various fixes from Tobias Ringstrom:
+ * tray if it was locked prior to the reset.
+ * - cdrom_read_capacity returns one frame too little.
+ * - Fix real capacity reporting.
+ *
+ * 4.58 May 1, 2000 - Clean up ACER50 stuff.
+ * - Fix small problem with ide_cdrom_capacity
+ *
+ * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
+ * correctly sensing a disc change.
+ * - Rearranged some code
+ * - Use extended sense on drives that support it for
+ * correctly reporting tray status -- from
+ * Michael D Johnson <johnsom@xxxxxxxx>
+ * 4.60 Dec 17, 2003 - Add mt rainier support
+ * - Bump timeout for packet commands, matches sr
+ * - Odd stuff
+ * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
+ * Pascal Schmidt <der.eremit@xxxxxxxx>
+ */
diff --git a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 b/Documentation/ide/ChangeLog.ide-floppy.1996-2002
new file mode 100644
index 0000000..46c19ef
--- /dev/null
+++ b/Documentation/ide/ChangeLog.ide-floppy.1996-2002
@@ -0,0 +1,63 @@
+/*
+ * Many thanks to Lode Leroy <Lode.Leroy@xxxxxxxxxxxx>, who tested so many
+ * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
+ *
+ * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
+ * Ver 0.2 Oct 31 96 Minor changes.
+ * Ver 0.3 Dec 2 96 Fixed error recovery bug.
+ * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
+ * Ver 0.5 Feb 21 97 Add partitions support.
+ * Use the minimum of the LBA and CHS capacities.
+ * Avoid hwgroup->rq == NULL on the last irq.
+ * Fix potential null dereferencing with DEBUG_LOG.
+ * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
+ * Add media write-protect detection.
+ * Issue START command only if TEST UNIT READY fails.
+ * Add work-around for IOMEGA ZIP revision 21.D.
+ * Remove idefloppy_get_capabilities().
+ * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
+ * bytes requested on each interrupt to be zero.
+ * Thanks to <shanos@xxxxxxxx> for pointing this out.
+ * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@xxxxxxxxxxxxxxx>
+ * Implement low level formatting. Reimplemented
+ * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
+ * bit. My LS-120 drive barfs on
+ * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
+ * Compromise by not reporting a failure to get this
+ * mode page. Implemented four IOCTLs in order to
+ * implement formatting. IOCTls begin with 0x4600,
+ * 0x46 is 'F' as in Format.
+ * Jan 9 01 Userland option to select format verify.
+ * Added PC_SUPPRESS_ERROR flag - some idefloppy drives
+ * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
+ * return a sense error. Suppress error reporting in
+ * this particular case in order to avoid spurious
+ * errors in syslog. The culprit is
+ * idefloppy_get_capability_page(), so move it to
+ * idefloppy_begin_format() so that it's not used
+ * unless absolutely necessary.
+ * If drive does not support format progress indication
+ * monitor the dsc bit in the status register.
+ * Also, O_NDELAY on open will allow the device to be
+ * opened without a disk available. This can be used to
+ * open an unformatted disk, or get the device capacity.
+ * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
+ * <paul@xxxxxxxxxxxxxxx>
+ * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
+ * driver. Included Powerbook internal zip kludge.
+ * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
+ * no disk on insert and disk change now works
+ * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
+ * Ver 0.95 Nov 7 00 Brought across to kernel 2.4
+ * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
+ * including set_bit patch from Rusty Russell
+ * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
+ * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
+ * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
+ * fix a lost interrupt problem. It appears the busy
+ * bit was being deasserted by my IOMEGA ATAPI ZIP 100
+ * drive before the drive was actually ready.
+ * Ver 0.98a Oct 29 01 Expose delay value so we can play.
+ * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
+ * to support new PocketZip drives
+ */
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index af05610..47e5b40 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2787,12 +2787,6 @@ int cdrom_ioctl(struct file * file, struct cdrom_device_info *cdi,
return -ENOSYS;
}
-static inline
-int msf_to_lba(char m, char s, char f)
-{
- return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
-}
-
/*
* Required when we need to use READ_10 to issue other than 2048 block
* reads
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 64df55e..e42a465 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -206,6 +206,15 @@ config BLK_DEV_IDECD
To compile this driver as a module, choose M here: the
module will be called ide-cd.
+config BLK_DEV_IDECD_VERBOSE_ERRORS
+ bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
+ depends on BLK_DEV_IDECD
+ default y
+ help
+ Turn this on to have the driver print out the meanings of the
+ ATAPI error codes. This will use up additional 8kB of kernel-space
+ memory, though.
+
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
depends on EXPERIMENTAL
@@ -617,8 +626,8 @@ config BLK_DEV_SC1200
tristate "National SCx200 chipset support"
select BLK_DEV_IDEDMA_PCI
help
- This driver adds support for the built in IDE on the National
- SCx200 series of embedded x86 "Geode" systems
+ This driver adds support for the on-board IDE controller on the
+ National SCx200 series of embedded x86 "Geode" systems.
config BLK_DEV_PIIX
tristate "Intel PIIXn chipsets support"
@@ -793,22 +802,22 @@ config BLK_DEV_CELLEB
depends on PPC_CELLEB
select BLK_DEV_IDEDMA_PCI
help
- This driver provides support for the built-in IDE controller on
+ This driver provides support for the on-board IDE controller on
Toshiba Cell Reference Board.
If unsure, say Y.
endif
config BLK_DEV_IDE_PMAC
- tristate "Builtin PowerMac IDE support"
+ tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
help
- This driver provides support for the built-in IDE controller on
+ This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
If unsure, say Y.
config BLK_DEV_IDE_PMAC_ATA100FIRST
- bool "Probe internal ATA/100 (Kauai) first"
+ bool "Probe on-board ATA/100 (Kauai) first"
depends on BLK_DEV_IDE_PMAC
help
This option will cause the ATA/100 controller found in UniNorth2
@@ -823,7 +832,7 @@ config BLK_DEV_IDEDMA_PMAC
depends on BLK_DEV_IDE_PMAC
select BLK_DEV_IDEDMA_PCI
help
- This option allows the driver for the built-in IDE controller on
+ This option allows the driver for the on-board IDE controller on
Power Macintoshes and PowerBooks to use DMA (direct memory access)
to transfer data to and from memory. Saying Y is safe and improves
performance.
@@ -934,7 +943,7 @@ config BLK_DEV_GAYLE
help
This is the IDE driver for the Amiga Gayle IDE interface. It supports
both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
- This includes builtin IDE interfaces on some Amiga models (A600,
+ This includes on-board IDE interfaces on some Amiga models (A600,
A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
bus (M-Tech E-Matrix 530 expansion card).
Say Y if you have an Amiga with a Gayle IDE interface and want to use
@@ -948,10 +957,10 @@ config BLK_DEV_IDEDOUBLER
depends on BLK_DEV_GAYLE && EXPERIMENTAL
---help---
This driver provides support for the so-called `IDE doublers' (made
- by various manufacturers, e.g. Eyetech) that can be connected to the
- builtin IDE interface of some Amiga models. Using such an IDE
- doubler, you can connect up to four instead of two IDE devices on
- the Amiga's builtin IDE interface.
+ by various manufacturers, e.g. Eyetech) that can be connected to
+ the on-board IDE interface of some Amiga models. Using such an IDE
+ doubler, you can connect up to four instead of two IDE devices to
+ the Amiga's on-board IDE interface.
Note that the normal Amiga Gayle IDE driver may not work correctly
if you have an IDE doubler and don't enable this driver!
@@ -963,9 +972,9 @@ config BLK_DEV_BUDDHA
tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
- This is the IDE driver for the IDE interfaces on the Buddha,
- Catweasel and X-Surf expansion boards. It supports up to two interfaces
- on the Buddha, three on the Catweasel and two on the X-Surf.
+ This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
+ and X-Surf expansion boards. It supports up to two interfaces on the
+ Buddha, three on the Catweasel and two on the X-Surf.
Say Y if you have a Buddha or Catweasel expansion board and want to
use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
@@ -975,23 +984,23 @@ config BLK_DEV_FALCON_IDE
tristate "Falcon IDE interface support"
depends on ATARI
help
- This is the IDE driver for the builtin IDE interface on the Atari
+ This is the IDE driver for the on-board IDE interface on the Atari
Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
- disks, CD-ROM drives, etc.) that are connected to the builtin IDE
+ disks, CD-ROM drives, etc.) that are connected to the on-board IDE
interface.
config BLK_DEV_MAC_IDE
tristate "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
help
- This is the IDE driver for the builtin IDE interface on some m68k
+ This is the IDE driver for the on-board IDE interface on some m68k
Macintosh models. It supports both the `Quadra style' (used in
Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
(used in the Powerbook 150 and 190 models) IDE interface.
Say Y if you have such an Macintosh model and want to use IDE
devices (hard disks, CD-ROM drives, etc.) that are connected to the
- builtin IDE interface.
+ on-board IDE interface.
config BLK_DEV_Q40IDE
tristate "Q40/Q60 IDE interface support"
@@ -1062,8 +1071,8 @@ config BLK_DEV_ALI14XX
boot parameter. It enables support for the secondary IDE interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well. See the files
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
- more info.
+ <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
+ for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
@@ -1088,8 +1097,8 @@ config BLK_DEV_QD65XX
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
- more info.
+ <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ for more info.
config BLK_DEV_UMC8672
tristate "UMC-8672 support"
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 0d2da89..a4a4323 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
+ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
+
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 45bf9c8..037300f 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -1,5 +1,4 @@
-/* linux/drivers/ide/arm/bast-ide.c
- *
+/*
* Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@xxxxxxxxxxxx>
*
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8a5c720..8d2cc47 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/arm/icside.c
- *
* Copyright (c) 1996-2004 Russell King.
*
* Please note that this platform does not support 32-bit IDE IO.
@@ -71,8 +69,6 @@ struct icside_state {
void __iomem *irq_port;
void __iomem *ioc_base;
unsigned int type;
- /* parent device... until the IDE core gets one of its own */
- struct device *dev;
ide_hwif_t *hwif[2];
};
@@ -206,23 +202,6 @@ static void icside_maskproc(ide_drive_t *drive, int mask)
* interfaces use the same IRQ, which should guarantee this.
*/
-static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct icside_state *state = hwif->hwif_data;
- struct scatterlist *sg = hwif->sg_table;
-
- ide_map_sg(drive, rq);
-
- if (rq_data_dir(rq) == READ)
- hwif->sg_dma_direction = DMA_FROM_DEVICE;
- else
- hwif->sg_dma_direction = DMA_TO_DEVICE;
-
- hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
- hwif->sg_dma_direction);
-}
-
/*
* Configure the IOMD to give the appropriate timings for the transfer
* mode being requested. We take the advice of the ATA standards, and
@@ -294,33 +273,32 @@ static void icside_dma_host_set(ide_drive_t *drive, int on)
static int icside_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct icside_state *state = hwif->hwif_data;
+ struct expansion_card *ec = ECARD_DEV(hwif->dev);
drive->waiting_for_dma = 0;
- disable_dma(ECARD_DEV(state->dev)->dma);
+ disable_dma(ec->dma);
/* Teardown mappings after DMA has completed. */
- dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
- return get_dma_residue(ECARD_DEV(state->dev)->dma) != 0;
+ return get_dma_residue(ec->dma) != 0;
}
static void icside_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct icside_state *state = hwif->hwif_data;
+ struct expansion_card *ec = ECARD_DEV(hwif->dev);
/* We can not enable DMA on both channels simultaneously. */
- BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
- enable_dma(ECARD_DEV(state->dev)->dma);
+ BUG_ON(dma_channel_active(ec->dma));
+ enable_dma(ec->dma);
}
static int icside_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct icside_state *state = hwif->hwif_data;
+ struct expansion_card *ec = ECARD_DEV(hwif->dev);
struct request *rq = hwif->hwgroup->rq;
unsigned int dma_mode;
@@ -332,9 +310,9 @@ static int icside_dma_setup(ide_drive_t *drive)
/*
* We can not enable DMA on both channels.
*/
- BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
+ BUG_ON(dma_channel_active(ec->dma));
- icside_build_sglist(drive, rq);
+ hwif->sg_nents = ide_build_sglist(drive, rq);
/*
* Ensure that we have the right interrupt routed.
@@ -349,14 +327,14 @@ static int icside_dma_setup(ide_drive_t *drive)
/*
* Select the correct timing for this drive.
*/
- set_dma_speed(ECARD_DEV(state->dev)->dma, drive->drive_data);
+ set_dma_speed(ec->dma, drive->drive_data);
/*
* Tell the DMA engine about the SG table and
* data direction.
*/
- set_dma_sg(ECARD_DEV(state->dev)->dma, hwif->sg_table, hwif->sg_nents);
- set_dma_mode(ECARD_DEV(state->dev)->dma, dma_mode);
+ set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
+ set_dma_mode(ec->dma, dma_mode);
drive->waiting_for_dma = 1;
@@ -444,6 +422,7 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e
hwif->noprobe = 0;
hwif->chipset = ide_acorn;
hwif->gendev.parent = &ec->dev;
+ hwif->dev = &ec->dev;
}
return hwif;
@@ -591,7 +570,6 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
}
state->type = ICS_TYPE_NOTYPE;
- state->dev = &ec->dev;
idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index e6b56d1..c8b6581 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/arm/rapide.c
- *
* Copyright (c) 1996-2002 Russell King.
*/
@@ -78,8 +76,8 @@ static void __devexit rapide_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
- /* there must be a better way */
- ide_unregister(hwif - ide_hwifs);
+ ide_unregister(hwif->index);
+
ecard_release_resources(ec);
}
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 8c3294c..0640a38 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1,5 +1,4 @@
-/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
- *
+/*
* Etrax specific IDE functions, like init and PIO-mode setting etc.
* Almost the entire ide.c is used for the rest of the Etrax ATA driver.
* Copyright (c) 2000-2005 Axis Communications AB
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 4f6d019..0243295 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -1,5 +1,4 @@
/*
- * drivers/ide/h8300/ide-h8300.c
* H8/300 generic IDE interface
*/
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index e888fc3..68bc618 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -1,5 +1,4 @@
/*
- * ide-acpi.c
* Provides ACPI support for IDE drives.
*
* Copyright (C) 2005 Intel Corp.
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index bee05a3..23074e8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1,14 +1,14 @@
/*
- * linux/drivers/ide/ide-cd.c
+ * ATAPI CD-ROM driver.
*
- * Copyright (C) 1994, 1995, 1996 scott snyder <snyder@xxxxxxxxxxxxxxx>
- * Copyright (C) 1996-1998 Erik Andersen <andersee@xxxxxxxxxx>
- * Copyright (C) 1998-2000 Jens Axboe <axboe@xxxxxxx>
+ * Copyright (C) 1994-1996 Scott Snyder <snyder@xxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1998 Erik Andersen <andersee@xxxxxxxxxx>
+ * Copyright (C) 1998-2000 Jens Axboe <axboe@xxxxxxx>
+ * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * ATAPI CD-ROM driver. To be used with ide.c.
* See Documentation/cdrom/ide-cd for usage information.
*
* Suggestions are welcome. Patches that work are more welcome though. ;-)
@@ -19,287 +19,11 @@
* ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
* ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
*
- * Drives that deviate from these standards will be accommodated as much
- * as possible via compile time or command-line options. Since I only have
- * a few drives, you generally need to send me patches...
- *
- * ----------------------------------
- * TO DO LIST:
- * -Make it so that Pioneer CD DR-A24X and friends don't get screwed up on
- * boot
- *
- * ----------------------------------
- * 1.00 Oct 31, 1994 -- Initial version.
- * 1.01 Nov 2, 1994 -- Fixed problem with starting request in
- * cdrom_check_status.
- * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
- * (from mlord) -- minor changes to cdrom_setup()
- * -- renamed ide_dev_s to ide_drive_t, enable irq on command
- * 2.00 Nov 27, 1994 -- Generalize packet command interface;
- * add audio ioctls.
- * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
- * which send an interrupt when ready for a command.
- * 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
- * Don't use SCMD_PLAYAUDIO_TI; it's not included
- * in the current version of ATAPI.
- * Try to use LBA instead of track or MSF addressing
- * when possible.
- * Don't wait for READY_STAT.
- * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
- * other than 2k and to move multiple sectors in a
- * single transaction.
- * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
- * Thanks to Nick Saw <cwsaw@xxxxxxxxxxxxxxxx> for
- * help in figuring this out. Ditto for Acer and
- * Aztech drives, which seem to have the same problem.
- * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
- * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
- * or data protect error.
- * Use HWIF and DEV_HWIF macros as in ide.c.
- * Always try to do a request_sense after
- * a failed command.
- * Include an option to give textual descriptions
- * of ATAPI errors.
- * Fix a bug in handling the sector cache which
- * showed up if the drive returned data in 512 byte
- * blocks (like Pioneer drives). Thanks to
- * Richard Hirst <srh@xxxxxxxxx> for diagnosing this.
- * Properly supply the page number field in the
- * MODE_SELECT command.
- * PLAYAUDIO12 is broken on the Aztech; work around it.
- * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
- * (my apologies to Scott, but now ide-cd.c is independent)
- * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
- * Implement CDROMREADAUDIO ioctl (UNTESTED).
- * Use input_ide_data() and output_ide_data().
- * Add door locking.
- * Fix usage count leak in cdrom_open, which happened
- * when a read-write mount was attempted.
- * Try to load the disk on open.
- * Implement CDROMEJECT_SW ioctl (off by default).
- * Read total cdrom capacity during open.
- * Rearrange logic in cdrom_decode_status. Issue
- * request sense commands for failed packet commands
- * from here instead of from cdrom_queue_packet_command.
- * Fix a race condition in retrieving error information.
- * Suppress printing normal unit attention errors and
- * some drive not ready errors.
- * Implement CDROMVOLREAD ioctl.
- * Implement CDROMREADMODE1/2 ioctls.
- * Fix race condition in setting up interrupt handlers
- * when the `serialize' option is used.
- * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
- * cdrom_queue_request.
- * Another try at using ide_[input,output]_data.
- * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
- * Make VERBOSE_IDE_CD_ERRORS dump failed command again.
- * Dump out more information for ILLEGAL REQUEST errs.
- * Fix handling of errors occurring before the
- * packet command is transferred.
- * Fix transfers with odd bytelengths.
- * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
- * `DCI-2S10' drives are broken too.
- * 3.04 Nov 20, 1995 -- So are Vertos drives.
- * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
- * 3.06 Dec 16, 1995 -- Add support needed for partitions.
- * More workarounds for Vertos bugs (based on patches
- * from Holger Dietze <dietze@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>).
- * Try to eliminate byteorder assumptions.
- * Use atapi_cdrom_subchnl struct definition.
- * Add STANDARD_ATAPI compilation option.
- * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
- * Vertos 300.
- * Add NO_DOOR_LOCKING configuration option.
- * Handle drive_cmd requests w/NULL args (for hdparm -t).
- * Work around sporadic Sony55e audio play problem.
- * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
- * problem with "hde=cdrom" with no drive present. -ml
- * 3.08 Mar 6, 1996 -- More Vertos workarounds.
- * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
- * Switch to using MSF addressing for audio commands.
- * Reformat to match kernel tabbing style.
- * Add CDROM_GET_UPC ioctl.
- * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
- * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt <heiko@xxxxxxxxxxxxxxxxxx>
- * to remove redundant verify_area calls.
- * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
- * from Gerhard Zuber <zuber@xxxxxxxxxxxxxxx>.
- * Let open succeed even if there's no loaded disc.
- * 3.13 May 19, 1996 -- Fixes for changer code.
- * 3.14 May 29, 1996 -- Add work-around for Vertos 600.
- * (From Hennus Bergman <hennus@xxxxxxxxx>.)
- * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
- * from Ben Galliart <bgallia@xxxxxxx> with
- * special help from Jeff Lightfoot
- * <jeffml@xxxxxxxxx>
- * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
- * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
- * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
- * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
- * 3.18 Oct 31, 1996 -- Added module and DMA support.
- *
- *
- * 4.00 Nov 5, 1996 -- New ide-cd maintainer,
- * Erik B. Andersen <andersee@xxxxxxxxxx>
- * -- Newer Creative drives don't always set the error
- * register correctly. Make sure we see media changes
- * regardless.
- * -- Integrate with generic cdrom driver.
- * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
- * a patch from Ciro Cattuto <>.
- * -- Call set_device_ro.
- * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls, based on patch by Erik Andersen
- * -- Add some probes of drive capability during setup.
- *
- * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
- * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls in favor of a generalized approach
- * using the generic cdrom driver.
- * -- Fully integrated with the 2.1.X kernel.
- * -- Other stuff that I forgot (lots of changes)
- *
- * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
- * to fix the drive door locking problems.
- *
- * 4.03 Dec 04, 1996 -- Added DSC overlap support.
- * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
- * by Ales Makarov (xmakarov@xxxxxxxxxxxxxxxx)
- *
- * 4.05 Nov 20, 1997 -- Modified to print more drive info on init
- * Minor other changes
- * Fix errors on CDROMSTOP (If you have a "Dolphin",
- * you must define IHAVEADOLPHIN)
- * Added identifier so new Sanyo CD-changer works
- * Better detection if door locking isn't supported
- *
- * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
- * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
- * 4.08 Dec 18, 1997 -- spew less noise when tray is empty
- * -- fix speed display for ACER 24X, 18X
- * 4.09 Jan 04, 1998 -- fix handling of the last block so we return
- * an end of file instead of an I/O error (Gadi)
- * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
- * slot when there is no disc in the current slot.
- * -- Fixed a memory leak where info->changer_info was
- * malloc'ed but never free'd when closing the device.
- * -- Cleaned up the global namespace a bit by making more
- * functions static that should already have been.
- * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
- * based on a patch for 2.0.33 by Jelle Foks
- * <jelle@xxxxxxxxxxxxxxxxxxxx>, a patch for 2.0.33
- * by Toni Giorgino <toni@xxxxxxxxxxxxxxxxx>, the SCSI
- * version, and my own efforts. -erik
- * -- Fixed a stupid bug which egcs was kind enough to
- * inform me of where "Illegal mode for this track"
- * was never returned due to a comparison on data
- * types of limited range.
- * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
- * now set ionly for CD-R and CD-RW drives. I had
- * removed this support because it produced errors.
- * It produced errors _only_ for non-writers. duh.
- * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
- * messages, since this is not an error.
- * -- Change error messages to be const
- * -- Remove a "\t" which looks ugly in the syslogs
- * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
- * since the .pdf version doesn't seem to work...
- * -- Updated the TODO list to something more current.
- *
- * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
- * patch thanks to "Eddie C. Dost" <ecd@xxxxxxxxx>
- *
- * 4.50 Oct 19, 1998 -- New maintainers!
- * Jens Axboe <axboe@xxxxxxxx>
- * Chris Zwilling <chris@xxxxxxxxxxxx>
- *
- * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@xxxxxxxx>
- * - ide_cdrom_reset enabled since the ide subsystem
- * handles resets fine now. <axboe@xxxxxxxx>
- * - Transfer size fix for Samsung CD-ROMs, thanks to
- * "Ville Hallik" <ville.hallik@xxxxxxx>.
- * - other minor stuff.
- *
- * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@xxxxxxxx>
- * - Detect DVD-ROM/RAM drives
- *
- * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
- * drive in transfer size limit.
- * - Fix the I/O error when doing eject without a medium
- * loaded on some drives.
- * - CDROMREADMODE2 is now implemented through
- * CDROMREADRAW, since many drives don't support
- * MODE2 (even though ATAPI 2.6 says they must).
- * - Added ignore parameter to ide-cd (as a module), eg
- * insmod ide-cd ignore='hda hdb'
- * Useful when using ide-cd in conjunction with
- * ide-scsi. TODO: non-modular way of doing the
- * same.
- *
- * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
- * packet interface to cdrom.c.
- * - Unified audio ioctl support, most of it.
- * - cleaned up various deprecated verify_area().
- * - Added ide_cdrom_packet() as the interface for
- * the Uniform generic_packet().
- * - bunch of other stuff, will fill in logs later.
- * - report 1 slot for non-changers, like the other
- * cd-rom drivers. don't report select disc for
- * non-changers as well.
- * - mask out audio playing, if the device can't do it.
- *
- * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
- * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
- * use this independently of the actual audio handling.
- * They will disappear later when I get the time to
- * do it cleanly.
- * - Minimize the TOC reading - only do it when we
- * know a media change has occurred.
- * - Moved all the CDROMREADx ioctls to the Uniform layer.
- * - Heiko Eißfeldt <heiko@xxxxxxxxxxxxxxxxxx> supplied
- * some fixes for CDI.
- * - CD-ROM leaving door locked fix from Andries
- * Brouwer <Andries.Brouwer@xxxxxx>
- * - Erik Andersen <andersen@xxxxxxxxxxxx> unified
- * commands across the various drivers and how
- * sense errors are handled.
- *
- * 4.56 Sep 12, 1999 - Removed changer support - it is now in the
- * Uniform layer.
- * - Added partition based multisession handling.
- * - Mode sense and mode select moved to the
- * Uniform layer.
- * - Fixed a problem with WPI CDS-32X drive - it
- * failed the capabilities
- *
- * 4.57 Apr 7, 2000 - Fixed sense reporting.
- * - Fixed possible oops in ide_cdrom_get_last_session()
- * - Fix locking mania and make ide_cdrom_reset relock
- * - Stop spewing errors to log when magicdev polls with
- * TEST_UNIT_READY on some drives.
- * - Various fixes from Tobias Ringstrom:
- * tray if it was locked prior to the reset.
- * - cdrom_read_capacity returns one frame too little.
- * - Fix real capacity reporting.
- *
- * 4.58 May 1, 2000 - Clean up ACER50 stuff.
- * - Fix small problem with ide_cdrom_capacity
- *
- * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
- * correctly sensing a disc change.
- * - Rearranged some code
- * - Use extended sense on drives that support it for
- * correctly reporting tray status -- from
- * Michael D Johnson <johnsom@xxxxxxxx>
- * 4.60 Dec 17, 2003 - Add mt rainier support
- * - Bump timeout for packet commands, matches sr
- * - Odd stuff
- * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
- * Pascal Schmidt <der.eremit@xxxxxxxx>
- *
- *************************************************************************/
-
-#define IDECD_VERSION "4.61"
+ * For historical changelog please see:
+ * Documentation/ide/ChangeLog.ide-cd.1994-2004
+ */
+
+#define IDECD_VERSION "5.00"
#include <linux/module.h>
#include <linux/types.h>
@@ -313,6 +37,7 @@
#include <linux/ide.h>
#include <linux/completion.h>
#include <linux/mutex.h>
+#include <linux/bcd.h>
#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */
@@ -360,11 +85,11 @@ static void ide_cd_put(struct cdrom_info *cd)
buffers. */
static void cdrom_saw_media_change (ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
-
- CDROM_STATE_FLAGS (drive)->media_changed = 1;
- CDROM_STATE_FLAGS (drive)->toc_valid = 0;
- info->nsectors_buffered = 0;
+ struct cdrom_info *cd = drive->driver_data;
+
+ cd->cd_flags |= IDE_CD_FLAG_MEDIA_CHANGED;
+ cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID;
+ cd->nsectors_buffered = 0;
}
static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
@@ -465,134 +190,14 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
}
}
}
-#if VERBOSE_IDE_CD_ERRORS
- {
- int i;
- const char *s = "bad sense key!";
- char buf[80];
-
- printk ("ATAPI device %s:\n", drive->name);
- if (sense->error_code==0x70)
- printk(" Error: ");
- else if (sense->error_code==0x71)
- printk(" Deferred Error: ");
- else if (sense->error_code == 0x7f)
- printk(" Vendor-specific Error: ");
- else
- printk(" Unknown Error Type: ");
-
- if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
- s = sense_key_texts[sense->sense_key];
-
- printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
-
- if (sense->asc == 0x40) {
- sprintf(buf, "Diagnostic failure on component 0x%02x",
- sense->ascq);
- s = buf;
- } else {
- int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
- unsigned long key = (sense->sense_key << 16);
- key |= (sense->asc << 8);
- if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
- key |= sense->ascq;
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (sense_data_texts[mid].asc_ascq == key ||
- sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
- s = sense_data_texts[mid].text;
- break;
- }
- else if (sense_data_texts[mid].asc_ascq > key)
- hi = mid;
- else
- lo = mid+1;
- }
- }
-
- if (s == NULL) {
- if (sense->asc > 0x80)
- s = "(vendor-specific error)";
- else
- s = "(reserved error code)";
- }
-
- printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
- s, sense->asc, sense->ascq);
-
- if (failed_command != NULL) {
-
- int lo=0, mid, hi= ARRAY_SIZE(packet_command_texts);
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (packet_command_texts[mid].packet_command ==
- failed_command->cmd[0]) {
- s = packet_command_texts[mid].text;
- break;
- }
- if (packet_command_texts[mid].packet_command >
- failed_command->cmd[0])
- hi = mid;
- else
- lo = mid+1;
- }
-
- printk (KERN_ERR " The failed \"%s\" packet command was: \n \"", s);
- for (i=0; i<sizeof (failed_command->cmd); i++)
- printk ("%02x ", failed_command->cmd[i]);
- printk ("\"\n");
- }
-
- /* The SKSV bit specifies validity of the sense_key_specific
- * in the next two commands. It is bit 7 of the first byte.
- * In the case of NOT_READY, if SKSV is set the drive can
- * give us nice ETA readings.
- */
- if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
- int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
- printk(KERN_ERR " Command is %02d%% complete\n", progress / 0xffff);
-
- }
-
- if (sense->sense_key == ILLEGAL_REQUEST &&
- (sense->sks[0] & 0x80) != 0) {
- printk(KERN_ERR " Error in %s byte %d",
- (sense->sks[0] & 0x40) != 0 ?
- "command packet" : "command data",
- (sense->sks[1] << 8) + sense->sks[2]);
-
- if ((sense->sks[0] & 0x40) != 0)
- printk (" bit %d", sense->sks[0] & 0x07);
- printk ("\n");
- }
- }
-
-#else /* not VERBOSE_IDE_CD_ERRORS */
-
- /* Suppress printing unit attention and `in progress of becoming ready'
- errors when we're not being verbose. */
-
- if (sense->sense_key == UNIT_ATTENTION ||
- (sense->sense_key == NOT_READY && (sense->asc == 4 ||
- sense->asc == 0x3a)))
- return;
-
- printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x asc: 0x%02x ascq: 0x%02x\n",
- drive->name,
- sense->error_code, sense->sense_key,
- sense->asc, sense->ascq);
-#endif /* not VERBOSE_IDE_CD_ERRORS */
+ ide_cd_log_error(drive->name, failed_command, sense);
}
/*
* Initialize a ide-cd packet command request
*/
-static void cdrom_prepare_request(ide_drive_t *drive, struct request *rq)
+void ide_cd_init_rq(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *cd = drive->driver_data;
@@ -611,7 +216,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
sense = &info->sense_data;
/* stuff the sense request in front of our current request */
- cdrom_prepare_request(drive, rq);
+ ide_cd_init_rq(drive, rq);
rq->data = sense;
rq->cmd[0] = GPCMD_REQUEST_SENSE;
@@ -718,7 +323,6 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
} else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
/* All other functions, except for READ. */
- unsigned long flags;
/*
* if we have an error, pass back CHECK_CONDITION as the
@@ -756,15 +360,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
* remove failed request completely and end it when the
* request sense has completed
*/
- if (stat & ERR_STAT) {
- spin_lock_irqsave(&ide_lock, flags);
- blkdev_dequeue_request(rq);
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
-
- cdrom_queue_request_sense(drive, rq->sense, rq);
- } else
- cdrom_end_request(drive, 0);
+ goto end_request;
} else if (blk_fs_request(rq)) {
int do_end_request = 0;
@@ -844,23 +440,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
sense data. We need this in order to perform end of media
processing */
- if (do_end_request) {
- if (stat & ERR_STAT) {
- unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
- blkdev_dequeue_request(rq);
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
+ if (do_end_request)
+ goto end_request;
- cdrom_queue_request_sense(drive, rq->sense, rq);
- } else
- cdrom_end_request(drive, 0);
- } else {
- /* If we got a CHECK_CONDITION status,
- queue a request sense command. */
- if (stat & ERR_STAT)
- cdrom_queue_request_sense(drive, NULL, NULL);
- }
+ /*
+ * If we got a CHECK_CONDITION status,
+ * queue a request sense command.
+ */
+ if (stat & ERR_STAT)
+ cdrom_queue_request_sense(drive, NULL, NULL);
} else {
blk_dump_rq_flags(rq, "ide-cd: bad rq");
cdrom_end_request(drive, 0);
@@ -868,6 +456,21 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
/* Retry, or handle the next request. */
return 1;
+
+end_request:
+ if (stat & ERR_STAT) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ blkdev_dequeue_request(rq);
+ HWGROUP(drive)->rq = NULL;
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ cdrom_queue_request_sense(drive, rq->sense, rq);
+ } else
+ cdrom_end_request(drive, 0);
+
+ return 1;
}
static int cdrom_timer_expiry(ide_drive_t *drive)
@@ -924,8 +527,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
/* Set up the controller registers. */
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL |
IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma);
-
- if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
+
+ if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
/* waiting for CDB interrupt, not DMA yet. */
if (info->dma)
drive->waiting_for_dma = 0;
@@ -951,10 +554,6 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
by cdrom_start_packet_command.
HANDLER is the interrupt handler to call when the command completes
or there's data ready. */
-/*
- * changed 5 parameters to 3 for dvd-ram
- * struct packet_command *pc; now packet_command_t *pc;
- */
#define ATAPI_MIN_CDB_BYTES 12
static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
struct request *rq,
@@ -965,7 +564,7 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;
- if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
+ if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
/* Here we should have been called after receiving an interrupt
from the device. DRQ should how be set. */
@@ -1005,6 +604,27 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
* Block read functions.
*/
+typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
+
+static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
+{
+ while (len > 0) {
+ int dum = 0;
+ xf(drive, &dum, sizeof(dum));
+ len -= sizeof(dum);
+ }
+}
+
+static void ide_cd_drain_data(ide_drive_t *drive, int nsects)
+{
+ while (nsects > 0) {
+ static char dum[SECTOR_SIZE];
+
+ drive->hwif->atapi_input_bytes(drive, dum, sizeof(dum));
+ nsects--;
+ }
+}
+
/*
* Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector
* buffer. Once the first sector is added, any subsequent sectors are
@@ -1043,11 +663,7 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
}
/* Throw away any remaining data. */
- while (sectors_to_transfer > 0) {
- static char dum[SECTOR_SIZE];
- HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
- --sectors_to_transfer;
- }
+ ide_cd_drain_data(drive, sectors_to_transfer);
}
/*
@@ -1056,23 +672,25 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
* ok; nonzero if the request has been terminated.
*/
static
-int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
+int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
{
- if (ireason == 2)
+ /*
+ * ireason == 0: the drive wants to receive data from us
+ * ireason == 2: the drive is expecting to transfer data to us
+ */
+ if (ireason == (!rw << 1))
return 0;
- else if (ireason == 0) {
- /* Whoops... The drive is expecting to receive data from us! */
+ else if (ireason == (rw << 1)) {
+ ide_hwif_t *hwif = drive->hwif;
+ xfer_func_t *xf;
+
+ /* Whoops... */
printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
drive->name, __FUNCTION__);
- /* Throw some data at the drive so it doesn't hang
- and quit this request. */
- while (len > 0) {
- int dum = 0;
- HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof (dum));
- len -= sizeof (dum);
- }
- } else if (ireason == 1) {
+ xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes;
+ ide_cd_pad_transfer(drive, xf, len);
+ } else if (rw == 0 && ireason == 1) {
/* Some drives (ASUS) seem to tell us that status
* info is available. just get it and ignore.
*/
@@ -1089,137 +707,28 @@ int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
}
/*
- * Interrupt routine. Called when a read request has completed.
+ * Assume that the drive will always provide data in multiples of at least
+ * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
*/
-static ide_startstop_t cdrom_read_intr (ide_drive_t *drive)
+static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
{
- int stat;
- int ireason, len, sectors_to_transfer, nskip;
- struct cdrom_info *info = drive->driver_data;
- u8 lowcyl = 0, highcyl = 0;
- int dma = info->dma, dma_error = 0;
-
- struct request *rq = HWGROUP(drive)->rq;
-
- /*
- * handle dma case
- */
- if (dma) {
- info->dma = 0;
- dma_error = HWIF(drive)->ide_dma_end(drive);
- if (dma_error) {
- printk(KERN_ERR "%s: DMA read error\n", drive->name);
- ide_dma_off(drive);
- }
- }
-
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- if (dma) {
- if (!dma_error) {
- ide_end_request(drive, 1, rq->nr_sectors);
- return ide_stopped;
- } else
- return ide_error(drive, "dma error", stat);
- }
-
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
-
- len = lowcyl + (256 * highcyl);
-
- /* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
- /* If we're not done filling the current buffer, complain.
- Otherwise, complete the command normally. */
- if (rq->current_nr_sectors > 0) {
- printk (KERN_ERR "%s: cdrom_read_intr: data underrun (%d blocks)\n",
- drive->name, rq->current_nr_sectors);
- rq->cmd_flags |= REQ_FAILED;
- cdrom_end_request(drive, 0);
- } else
- cdrom_end_request(drive, 1);
- return ide_stopped;
- }
-
- /* Check that the drive is expecting to do the same thing we are. */
- if (cdrom_read_check_ireason (drive, len, ireason))
- return ide_stopped;
-
- /* Assume that the drive will always provide data in multiples
- of at least SECTOR_SIZE, as it gets hairy to keep track
- of the transfers otherwise. */
- if ((len % SECTOR_SIZE) != 0) {
- printk (KERN_ERR "%s: cdrom_read_intr: Bad transfer size %d\n",
- drive->name, len);
- if (CDROM_CONFIG_FLAGS(drive)->limit_nframes)
- printk (KERN_ERR " This drive is not supported by this version of the driver\n");
- else {
- printk (KERN_ERR " Trying to limit transfer sizes\n");
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- }
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- /* The number of sectors we need to read from the drive. */
- sectors_to_transfer = len / SECTOR_SIZE;
-
- /* First, figure out if we need to bit-bucket
- any of the leading sectors. */
- nskip = min_t(int, rq->current_nr_sectors - bio_cur_sectors(rq->bio), sectors_to_transfer);
-
- while (nskip > 0) {
- /* We need to throw away a sector. */
- static char dum[SECTOR_SIZE];
- HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
-
- --rq->current_nr_sectors;
- --nskip;
- --sectors_to_transfer;
- }
+ struct cdrom_info *cd = drive->driver_data;
- /* Now loop while we still have data to read from the drive. */
- while (sectors_to_transfer > 0) {
- int this_transfer;
+ if ((len % SECTOR_SIZE) == 0)
+ return 0;
- /* If we've filled the present buffer but there's another
- chained buffer after it, move on. */
- if (rq->current_nr_sectors == 0 && rq->nr_sectors)
- cdrom_end_request(drive, 1);
+ printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
+ drive->name, __FUNCTION__, len);
- /* If the buffers are full, cache the rest of the data in our
- internal buffer. */
- if (rq->current_nr_sectors == 0) {
- cdrom_buffer_sectors(drive, rq->sector, sectors_to_transfer);
- sectors_to_transfer = 0;
- } else {
- /* Transfer data to the buffers.
- Figure out how many sectors we can transfer
- to the current buffer. */
- this_transfer = min_t(int, sectors_to_transfer,
- rq->current_nr_sectors);
-
- /* Read this_transfer sectors
- into the current buffer. */
- while (this_transfer > 0) {
- HWIF(drive)->atapi_input_bytes(drive, rq->buffer, SECTOR_SIZE);
- rq->buffer += SECTOR_SIZE;
- --rq->nr_sectors;
- --rq->current_nr_sectors;
- ++rq->sector;
- --this_transfer;
- --sectors_to_transfer;
- }
- }
+ if (cd->cd_flags & IDE_CD_FLAG_LIMIT_NFRAMES)
+ printk(KERN_ERR " This drive is not supported by "
+ "this version of the driver\n");
+ else {
+ printk(KERN_ERR " Trying to limit transfer sizes\n");
+ cd->cd_flags |= IDE_CD_FLAG_LIMIT_NFRAMES;
}
- /* Done moving data! Wait for another interrupt. */
- ide_set_handler(drive, &cdrom_read_intr, ATAPI_WAIT_PC, NULL);
- return ide_started;
+ return 1;
}
/*
@@ -1281,48 +790,58 @@ static int cdrom_read_from_buffer (ide_drive_t *drive)
return 0;
}
+static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
+
/*
- * Routine to send a read packet command to the drive.
- * This is usually called directly from cdrom_start_read.
+ * Routine to send a read/write packet command to the drive.
+ * This is usually called directly from cdrom_start_{read,write}().
* However, for drq_interrupt devices, it is called from an interrupt
* when the drive is ready to accept the command.
*/
-static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive)
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
- int nskip;
- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ if (rq_data_dir(rq) == READ) {
+ unsigned short sectors_per_frame =
+ queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ int nskip = rq->sector & (sectors_per_frame - 1);
- /* If the requested sector doesn't start on a cdrom block boundary,
- we must adjust the start of the transfer so that it does,
- and remember to skip the first few sectors.
- If the CURRENT_NR_SECTORS field is larger than the size
- of the buffer, it will mean that we're to skip a number
- of sectors equal to the amount by which CURRENT_NR_SECTORS
- is larger than the buffer size. */
- nskip = rq->sector & (sectors_per_frame - 1);
- if (nskip > 0) {
- /* Sanity check... */
- if (rq->current_nr_sectors != bio_cur_sectors(rq->bio) &&
- (rq->sector & (sectors_per_frame - 1))) {
- printk(KERN_ERR "%s: cdrom_start_read_continuation: buffer botch (%u)\n",
- drive->name, rq->current_nr_sectors);
- cdrom_end_request(drive, 0);
- return ide_stopped;
+ /*
+ * If the requested sector doesn't start on a frame boundary,
+ * we must adjust the start of the transfer so that it does,
+ * and remember to skip the first few sectors.
+ *
+ * If the rq->current_nr_sectors field is larger than the size
+ * of the buffer, it will mean that we're to skip a number of
+ * sectors equal to the amount by which rq->current_nr_sectors
+ * is larger than the buffer size.
+ */
+ if (nskip > 0) {
+ /* Sanity check... */
+ if (rq->current_nr_sectors !=
+ bio_cur_sectors(rq->bio)) {
+ printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
+ drive->name, __FUNCTION__,
+ rq->current_nr_sectors);
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+ rq->current_nr_sectors += nskip;
}
- rq->current_nr_sectors += nskip;
}
-
+#if 0
+ else
+ /* the immediate bit */
+ rq->cmd[1] = 1 << 3;
+#endif
/* Set up the command */
rq->timeout = ATAPI_WAIT_PC;
/* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, rq, &cdrom_read_intr);
+ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
-
#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
@@ -1335,7 +854,8 @@ static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive)
if (cdrom_decode_status(drive, 0, &stat))
return ide_stopped;
- CDROM_CONFIG_FLAGS(drive)->seeking = 1;
+
+ info->cd_flags |= IDE_CD_FLAG_SEEKING;
if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
if (--retry == 0) {
@@ -1391,184 +911,25 @@ static void restore_request (struct request *rq)
rq->q->prep_rq_fn(rq->q, rq);
}
-/*
- * Start a read request from the CD-ROM.
- */
-static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block)
-{
- struct cdrom_info *info = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
-
- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
-
- /* We may be retrying this request after an error. Fix up
- any weirdness which might be present in the request packet. */
- restore_request(rq);
-
- /* Satisfy whatever we can of this request from our cached sector. */
- if (cdrom_read_from_buffer(drive))
- return ide_stopped;
-
- /* Clear the local sector buffer. */
- info->nsectors_buffered = 0;
-
- /* use dma, if possible. */
- info->dma = drive->using_dma;
- if ((rq->sector & (sectors_per_frame - 1)) ||
- (rq->nr_sectors & (sectors_per_frame - 1)))
- info->dma = 0;
-
- /* Start sending the read request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation);
-}
-
/****************************************************************************
* Execute all other packet commands.
*/
-/* Interrupt routine for packet command completion. */
-static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
+static void ide_cd_request_sense_fixup(struct request *rq)
{
- int ireason, len, thislen;
- struct request *rq = HWGROUP(drive)->rq;
- u8 lowcyl = 0, highcyl = 0;
- int stat;
-
- /* Check for errors. */
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
-
- len = lowcyl + (256 * highcyl);
-
- /* If DRQ is clear, the command has completed.
- Complain if we still have data left to transfer. */
- if ((stat & DRQ_STAT) == 0) {
- /* Some of the trailing request sense fields are optional, and
- some drives don't send them. Sigh. */
- if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
- rq->data_len > 0 &&
- rq->data_len <= 5) {
- while (rq->data_len > 0) {
- *(unsigned char *)rq->data++ = 0;
- --rq->data_len;
- }
- }
-
- if (rq->data_len == 0)
- cdrom_end_request(drive, 1);
- else {
- /* Comment this out, because this always happens
- right after a reset occurs, and it is annoying to
- always print expected stuff. */
- /*
- printk ("%s: cdrom_pc_intr: data underrun %d\n",
- drive->name, pc->buflen);
- */
- rq->cmd_flags |= REQ_FAILED;
- cdrom_end_request(drive, 0);
- }
- return ide_stopped;
- }
-
- /* Figure out how much data to transfer. */
- thislen = rq->data_len;
- if (thislen > len) thislen = len;
-
- /* The drive wants to be written to. */
- if (ireason == 0) {
- if (!rq->data) {
- blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
- goto confused;
- }
- /* Transfer the data. */
- HWIF(drive)->atapi_output_bytes(drive, rq->data, thislen);
-
- /* If we haven't moved enough data to satisfy the drive,
- add some padding. */
- while (len > thislen) {
- int dum = 0;
- HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
- }
-
- /* Keep count of how much data we've moved. */
- rq->data += thislen;
- rq->data_len -= thislen;
- }
-
- /* Same drill for reading. */
- else if (ireason == 2) {
- if (!rq->data) {
- blk_dump_rq_flags(rq, "cdrom_pc_intr, read");
- goto confused;
- }
- /* Transfer the data. */
- HWIF(drive)->atapi_input_bytes(drive, rq->data, thislen);
-
- /* If we haven't moved enough data to satisfy the drive,
- add some padding. */
- while (len > thislen) {
- int dum = 0;
- HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
+ /*
+ * Some of the trailing request sense fields are optional,
+ * and some drives don't send them. Sigh.
+ */
+ if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
+ rq->data_len > 0 && rq->data_len <= 5)
+ while (rq->data_len > 0) {
+ *(u8 *)rq->data++ = 0;
+ --rq->data_len;
}
-
- /* Keep count of how much data we've moved. */
- rq->data += thislen;
- rq->data_len -= thislen;
-
- if (blk_sense_request(rq))
- rq->sense_len += thislen;
- } else {
-confused:
- printk (KERN_ERR "%s: cdrom_pc_intr: The drive "
- "appears confused (ireason = 0x%02x). "
- "Trying to recover by ending request.\n",
- drive->name, ireason);
- rq->cmd_flags |= REQ_FAILED;
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- /* Now we wait for another interrupt. */
- ide_set_handler(drive, &cdrom_pc_intr, ATAPI_WAIT_PC, cdrom_timer_expiry);
- return ide_started;
}
-static ide_startstop_t cdrom_do_pc_continuation (ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
-
- if (!rq->timeout)
- rq->timeout = ATAPI_WAIT_PC;
-
- /* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, rq, &cdrom_pc_intr);
-}
-
-
-static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive)
-{
- int len;
- struct request *rq = HWGROUP(drive)->rq;
- struct cdrom_info *info = drive->driver_data;
-
- info->dma = 0;
- rq->cmd_flags &= ~REQ_FAILED;
- len = rq->data_len;
-
- /* Start sending the command to the drive. */
- return cdrom_start_packet_command(drive, len, cdrom_do_pc_continuation);
-}
-
-
-static int cdrom_queue_packet_command(ide_drive_t *drive, struct request *rq)
+int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)
{
struct request_sense sense;
int retries = 10;
@@ -1617,37 +978,6 @@ static int cdrom_queue_packet_command(ide_drive_t *drive, struct request *rq)
}
/*
- * Write handling
- */
-static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
-{
- /* Two notes about IDE interrupt reason here - 0 means that
- * the drive wants to receive data from us, 2 means that
- * the drive is expecting to transfer data to us.
- */
- if (ireason == 0)
- return 0;
- else if (ireason == 2) {
- /* Whoops... The drive wants to send data. */
- printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
- drive->name, __FUNCTION__);
-
- while (len > 0) {
- int dum = 0;
- HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
- len -= sizeof(dum);
- }
- } else {
- /* Drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
- drive->name, __FUNCTION__, ireason);
- }
-
- cdrom_end_request(drive, 0);
- return 1;
-}
-
-/*
* Called from blk_end_request_callback() after the data of the request
* is completed and before the request is completed.
* By returning value '1', blk_end_request_callback() returns immediately
@@ -1658,29 +988,27 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)
return 1;
}
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
-
-/*
- * best way to deal with dma that is not sector aligned right now... note
- * that in this path we are not using ->data or ->buffer at all. this irs
- * can replace cdrom_pc_intr, cdrom_read_intr, and cdrom_write_intr in the
- * future.
- */
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
- int dma_error, dma, stat, ireason, len, thislen;
- u8 lowcyl, highcyl;
xfer_func_t *xferfunc;
- unsigned long flags;
+ ide_expiry_t *expiry = NULL;
+ int dma_error = 0, dma, stat, ireason, len, thislen, uptodate = 0;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
+ unsigned int timeout;
+ u8 lowcyl, highcyl;
/* Check for errors. */
- dma_error = 0;
dma = info->dma;
if (dma) {
info->dma = 0;
dma_error = HWIF(drive)->ide_dma_end(drive);
+ if (dma_error) {
+ printk(KERN_ERR "%s: DMA %s error\n", drive->name,
+ write ? "write" : "read");
+ ide_dma_off(drive);
+ }
}
if (cdrom_decode_status(drive, 0, &stat))
@@ -1690,19 +1018,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
* using dma, transfer is complete now
*/
if (dma) {
- if (dma_error) {
- printk(KERN_ERR "ide-cd: dma error\n");
- ide_dma_off(drive);
+ if (dma_error)
return ide_error(drive, "dma error", stat);
+ if (blk_fs_request(rq)) {
+ ide_end_request(drive, 1, rq->nr_sectors);
+ return ide_stopped;
}
-
- spin_lock_irqsave(&ide_lock, flags);
- if (__blk_end_request(rq, 0, rq->data_len))
- BUG();
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
-
- return ide_stopped;
+ goto end_request;
}
/*
@@ -1713,7 +1035,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
len = lowcyl + (256 * highcyl);
- thislen = rq->data_len;
+
+ thislen = blk_fs_request(rq) ? len : rq->data_len;
if (thislen > len)
thislen = len;
@@ -1721,53 +1044,111 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
* If DRQ is clear, the command has completed.
*/
if ((stat & DRQ_STAT) == 0) {
- spin_lock_irqsave(&ide_lock, flags);
- if (__blk_end_request(rq, 0, rq->data_len))
- BUG();
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
-
- return ide_stopped;
+ if (blk_fs_request(rq)) {
+ /*
+ * If we're not done reading/writing, complain.
+ * Otherwise, complete the command normally.
+ */
+ uptodate = 1;
+ if (rq->current_nr_sectors > 0) {
+ printk(KERN_ERR "%s: %s: data underrun "
+ "(%d blocks)\n",
+ drive->name, __FUNCTION__,
+ rq->current_nr_sectors);
+ if (!write)
+ rq->cmd_flags |= REQ_FAILED;
+ uptodate = 0;
+ }
+ cdrom_end_request(drive, uptodate);
+ return ide_stopped;
+ } else if (!blk_pc_request(rq)) {
+ ide_cd_request_sense_fixup(rq);
+ /* Complain if we still have data left to transfer. */
+ uptodate = rq->data_len ? 0 : 1;
+ }
+ goto end_request;
}
/*
* check which way to transfer data
*/
- if (rq_data_dir(rq) == WRITE) {
- /*
- * write to drive
- */
- if (cdrom_write_check_ireason(drive, len, ireason))
+ if (blk_fs_request(rq) || blk_pc_request(rq)) {
+ if (ide_cd_check_ireason(drive, len, ireason, write))
return ide_stopped;
- xferfunc = HWIF(drive)->atapi_output_bytes;
- } else {
- /*
- * read from drive
- */
- if (cdrom_read_check_ireason(drive, len, ireason))
- return ide_stopped;
+ if (blk_fs_request(rq) && write == 0) {
+ int nskip;
+ if (ide_cd_check_transfer_size(drive, len)) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+
+ /*
+ * First, figure out if we need to bit-bucket
+ * any of the leading sectors.
+ */
+ nskip = min_t(int, rq->current_nr_sectors
+ - bio_cur_sectors(rq->bio),
+ thislen >> 9);
+ if (nskip > 0) {
+ ide_cd_drain_data(drive, nskip);
+ rq->current_nr_sectors -= nskip;
+ thislen -= (nskip << 9);
+ }
+ }
+ }
+
+ if (ireason == 0) {
+ write = 1;
+ xferfunc = HWIF(drive)->atapi_output_bytes;
+ } else if (ireason == 2 || (ireason == 1 &&
+ (blk_fs_request(rq) || blk_pc_request(rq)))) {
+ write = 0;
xferfunc = HWIF(drive)->atapi_input_bytes;
+ } else {
+ printk(KERN_ERR "%s: %s: The drive "
+ "appears confused (ireason = 0x%02x). "
+ "Trying to recover by ending request.\n",
+ drive->name, __FUNCTION__, ireason);
+ goto end_request;
}
/*
* transfer data
*/
while (thislen > 0) {
- int blen = blen = rq->data_len;
- char *ptr = rq->data;
+ u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
+ int blen = rq->data_len;
/*
* bio backed?
*/
if (rq->bio) {
- ptr = bio_data(rq->bio);
- blen = bio_iovec(rq->bio)->bv_len;
+ if (blk_fs_request(rq)) {
+ ptr = rq->buffer;
+ blen = rq->current_nr_sectors << 9;
+ } else {
+ ptr = bio_data(rq->bio);
+ blen = bio_iovec(rq->bio)->bv_len;
+ }
}
if (!ptr) {
- printk(KERN_ERR "%s: confused, missing data\n", drive->name);
+ if (blk_fs_request(rq) && !write)
+ /*
+ * If the buffers are full, cache the rest
+ * of the data in our internal buffer.
+ */
+ cdrom_buffer_sectors(drive, rq->sector,
+ thislen >> 9);
+ else {
+ printk(KERN_ERR "%s: confused, missing data\n",
+ drive->name);
+ blk_dump_rq_flags(rq, rq_data_dir(rq)
+ ? "cdrom_newpc_intr, write"
+ : "cdrom_newpc_intr, read");
+ }
break;
}
@@ -1778,185 +1159,117 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
thislen -= blen;
len -= blen;
- rq->data_len -= blen;
- if (rq->bio)
+ if (blk_fs_request(rq)) {
+ rq->buffer += blen;
+ rq->nr_sectors -= (blen >> 9);
+ rq->current_nr_sectors -= (blen >> 9);
+ rq->sector += (blen >> 9);
+
+ if (rq->current_nr_sectors == 0 && rq->nr_sectors)
+ cdrom_end_request(drive, 1);
+ } else {
+ rq->data_len -= blen;
+
/*
* The request can't be completed until DRQ is cleared.
* So complete the data, but don't complete the request
* using the dummy function for the callback feature
* of blk_end_request_callback().
*/
- blk_end_request_callback(rq, 0, blen,
+ if (rq->bio)
+ blk_end_request_callback(rq, 0, blen,
cdrom_newpc_intr_dummy_cb);
- else
- rq->data += blen;
- }
-
- /*
- * pad, if necessary
- */
- if (len > 0) {
- while (len > 0) {
- int pad = 0;
-
- xferfunc(drive, &pad, sizeof(pad));
- len -= sizeof(pad);
- }
- }
-
- BUG_ON(HWGROUP(drive)->handler != NULL);
-
- ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, NULL);
- return ide_started;
-}
-
-static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
-{
- int stat, ireason, len, sectors_to_transfer, uptodate;
- struct cdrom_info *info = drive->driver_data;
- int dma_error = 0, dma = info->dma;
- u8 lowcyl = 0, highcyl = 0;
-
- struct request *rq = HWGROUP(drive)->rq;
-
- /* Check for errors. */
- if (dma) {
- info->dma = 0;
- dma_error = HWIF(drive)->ide_dma_end(drive);
- if (dma_error) {
- printk(KERN_ERR "%s: DMA write error\n", drive->name);
- ide_dma_off(drive);
+ else
+ rq->data += blen;
}
}
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
+ if (write && blk_sense_request(rq))
+ rq->sense_len += thislen;
/*
- * using dma, transfer is complete now
+ * pad, if necessary
*/
- if (dma) {
- if (dma_error)
- return ide_error(drive, "dma error", stat);
+ if (!blk_fs_request(rq) && len > 0)
+ ide_cd_pad_transfer(drive, xferfunc, len);
- ide_end_request(drive, 1, rq->nr_sectors);
- return ide_stopped;
+ if (blk_pc_request(rq)) {
+ timeout = rq->timeout;
+ } else {
+ timeout = ATAPI_WAIT_PC;
+ if (!blk_fs_request(rq))
+ expiry = cdrom_timer_expiry;
}
- /* Read the interrupt reason and the transfer length. */
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+ ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
+ return ide_started;
- len = lowcyl + (256 * highcyl);
+end_request:
+ if (blk_pc_request(rq)) {
+ unsigned long flags;
- /* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
- /* If we're not done writing, complain.
- * Otherwise, complete the command normally.
- */
- uptodate = 1;
- if (rq->current_nr_sectors > 0) {
- printk(KERN_ERR "%s: %s: data underrun (%d blocks)\n",
- drive->name, __FUNCTION__,
- rq->current_nr_sectors);
- uptodate = 0;
- }
+ spin_lock_irqsave(&ide_lock, flags);
+ if (__blk_end_request(rq, 0, rq->data_len))
+ BUG();
+ HWGROUP(drive)->rq = NULL;
+ spin_unlock_irqrestore(&ide_lock, flags);
+ } else {
+ if (!uptodate)
+ rq->cmd_flags |= REQ_FAILED;
cdrom_end_request(drive, uptodate);
- return ide_stopped;
}
+ return ide_stopped;
+}
- /* Check that the drive is expecting to do the same thing we are. */
- if (cdrom_write_check_ireason(drive, len, ireason))
- return ide_stopped;
-
- sectors_to_transfer = len / SECTOR_SIZE;
-
- /*
- * now loop and write out the data
- */
- while (sectors_to_transfer > 0) {
- int this_transfer;
-
- if (!rq->current_nr_sectors) {
- printk(KERN_ERR "%s: %s: confused, missing data\n",
- drive->name, __FUNCTION__);
- break;
- }
+static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
+{
+ struct cdrom_info *cd = drive->driver_data;
+ int write = rq_data_dir(rq) == WRITE;
+ unsigned short sectors_per_frame =
+ queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ if (write) {
/*
- * Figure out how many sectors we can transfer
+ * disk has become write protected
*/
- this_transfer = min_t(int, sectors_to_transfer, rq->current_nr_sectors);
-
- while (this_transfer > 0) {
- HWIF(drive)->atapi_output_bytes(drive, rq->buffer, SECTOR_SIZE);
- rq->buffer += SECTOR_SIZE;
- --rq->nr_sectors;
- --rq->current_nr_sectors;
- ++rq->sector;
- --this_transfer;
- --sectors_to_transfer;
+ if (cd->disk->policy) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
}
-
+ } else {
/*
- * current buffer complete, move on
+ * We may be retrying this request after an error. Fix up any
+ * weirdness which might be present in the request packet.
*/
- if (rq->current_nr_sectors == 0 && rq->nr_sectors)
- cdrom_end_request(drive, 1);
- }
-
- /* re-arm handler */
- ide_set_handler(drive, &cdrom_write_intr, ATAPI_WAIT_PC, NULL);
- return ide_started;
-}
-
-static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
+ restore_request(rq);
-#if 0 /* the immediate bit */
- rq->cmd[1] = 1 << 3;
-#endif
- rq->timeout = ATAPI_WAIT_PC;
-
- return cdrom_transfer_packet_command(drive, rq, cdrom_write_intr);
-}
-
-static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
-{
- struct cdrom_info *info = drive->driver_data;
- struct gendisk *g = info->disk;
- unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ /* Satisfy whatever we can of this request from our cache. */
+ if (cdrom_read_from_buffer(drive))
+ return ide_stopped;
+ }
/*
- * writes *must* be hardware frame aligned
+ * use DMA, if possible / writes *must* be hardware frame aligned
*/
if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
(rq->sector & (sectors_per_frame - 1))) {
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- /*
- * disk has become write protected
- */
- if (g->policy) {
- cdrom_end_request(drive, 0);
- return ide_stopped;
- }
-
- info->nsectors_buffered = 0;
+ if (write) {
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+ cd->dma = 0;
+ } else
+ cd->dma = drive->using_dma;
- /* use dma, if possible. we don't need to check more, since we
- * know that the transfer is always (at least!) frame aligned */
- info->dma = drive->using_dma ? 1 : 0;
+ /* Clear the local sector buffer. */
+ cd->nsectors_buffered = 0;
- info->devinfo.media_written = 1;
+ if (write)
+ cd->devinfo.media_written = 1;
- /* Start sending the write request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont);
+ /* Start sending the read/write request to the drive. */
+ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
}
static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
@@ -1973,7 +1286,10 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *info = drive->driver_data;
- rq->cmd_flags |= REQ_QUIET;
+ if (blk_pc_request(rq))
+ rq->cmd_flags |= REQ_QUIET;
+ else
+ rq->cmd_flags &= ~REQ_FAILED;
info->dma = 0;
@@ -2010,7 +1326,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block)
struct cdrom_info *info = drive->driver_data;
if (blk_fs_request(rq)) {
- if (CDROM_CONFIG_FLAGS(drive)->seeking) {
+ if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
unsigned long elapsed = jiffies - info->start_seek;
int stat = HWIF(drive)->INB(IDE_STATUS_REG);
@@ -2021,22 +1337,16 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block)
}
printk (KERN_ERR "%s: DSC timeout\n", drive->name);
}
- CDROM_CONFIG_FLAGS(drive)->seeking = 0;
+ info->cd_flags &= ~IDE_CD_FLAG_SEEKING;
}
if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) {
action = cdrom_start_seek(drive, block);
- } else {
- if (rq_data_dir(rq) == READ)
- action = cdrom_start_read(drive, block);
- else
- action = cdrom_start_write(drive, rq);
- }
+ } else
+ action = cdrom_start_rw(drive, rq);
info->last_block = block;
return action;
- } else if (rq->cmd_type == REQ_TYPE_SENSE ||
+ } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
- return cdrom_do_packet_command(drive);
- } else if (blk_pc_request(rq)) {
return cdrom_do_block_pc(drive, rq);
} else if (blk_special_request(rq)) {
/*
@@ -2063,141 +1373,33 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block)
* can also be NULL, in which case no sense information is returned.
*/
-#if ! STANDARD_ATAPI
-static inline
-int bin2bcd (int x)
-{
- return (x%10) | ((x/10) << 4);
-}
-
-
-static inline
-int bcd2bin (int x)
-{
- return (x >> 4) * 10 + (x & 0x0f);
-}
-
static
void msf_from_bcd (struct atapi_msf *msf)
{
- msf->minute = bcd2bin (msf->minute);
- msf->second = bcd2bin (msf->second);
- msf->frame = bcd2bin (msf->frame);
-}
-
-#endif /* not STANDARD_ATAPI */
-
-
-static inline
-void lba_to_msf (int lba, byte *m, byte *s, byte *f)
-{
- lba += CD_MSF_OFFSET;
- lba &= 0xffffff; /* negative lbas use only 24 bits */
- *m = lba / (CD_SECS * CD_FRAMES);
- lba %= (CD_SECS * CD_FRAMES);
- *s = lba / CD_FRAMES;
- *f = lba % CD_FRAMES;
-}
-
-
-static inline
-int msf_to_lba (byte m, byte s, byte f)
-{
- return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+ msf->minute = BCD2BIN(msf->minute);
+ msf->second = BCD2BIN(msf->second);
+ msf->frame = BCD2BIN(msf->frame);
}
-static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
+int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
{
struct request req;
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *cdi = &info->devinfo;
- cdrom_prepare_request(drive, &req);
+ ide_cd_init_rq(drive, &req);
req.sense = sense;
req.cmd[0] = GPCMD_TEST_UNIT_READY;
req.cmd_flags |= REQ_QUIET;
-#if ! STANDARD_ATAPI
- /* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
- switch CDs instead of supporting the LOAD_UNLOAD opcode */
-
+ /*
+ * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
+ * switch CDs instead of supporting the LOAD_UNLOAD opcode.
+ */
req.cmd[7] = cdi->sanyo_slot % 3;
-#endif /* not STANDARD_ATAPI */
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-
-/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
-static int
-cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense)
-{
- struct request_sense my_sense;
- struct request req;
- int stat;
-
- if (sense == NULL)
- sense = &my_sense;
-
- /* If the drive cannot lock the door, just pretend. */
- if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) {
- stat = 0;
- } else {
- cdrom_prepare_request(drive, &req);
- req.sense = sense;
- req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- req.cmd[4] = lockflag ? 1 : 0;
- stat = cdrom_queue_packet_command(drive, &req);
- }
-
- /* If we got an illegal field error, the drive
- probably cannot lock the door. */
- if (stat != 0 &&
- sense->sense_key == ILLEGAL_REQUEST &&
- (sense->asc == 0x24 || sense->asc == 0x20)) {
- printk (KERN_ERR "%s: door locking not supported\n",
- drive->name);
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
- stat = 0;
- }
-
- /* no medium, that's alright. */
- if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
- stat = 0;
-
- if (stat == 0)
- CDROM_STATE_FLAGS(drive)->door_locked = lockflag;
-
- return stat;
-}
-
-/* Eject the disk if EJECTFLAG is 0.
- If EJECTFLAG is 1, try to reload the disk. */
-static int cdrom_eject(ide_drive_t *drive, int ejectflag,
- struct request_sense *sense)
-{
- struct request req;
- char loej = 0x02;
-
- if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag)
- return -EDRIVE_CANT_DO_THIS;
-
- /* reload fails on some drives, if the tray is locked */
- if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag)
- return 0;
-
- cdrom_prepare_request(drive, &req);
-
- /* only tell drive to close tray if open, if it can do that */
- if (ejectflag && !CDROM_CONFIG_FLAGS(drive)->close_tray)
- loej = 0;
-
- req.sense = sense;
- req.cmd[0] = GPCMD_START_STOP_UNIT;
- req.cmd[4] = loej | (ejectflag != 0);
- return cdrom_queue_packet_command(drive, &req);
+ return ide_cd_queue_pc(drive, &req);
}
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
@@ -2212,7 +1414,7 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
int stat;
struct request req;
- cdrom_prepare_request(drive, &req);
+ ide_cd_init_rq(drive, &req);
req.sense = sense;
req.cmd[0] = GPCMD_READ_CDVD_CAPACITY;
@@ -2220,7 +1422,7 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
req.data_len = sizeof(capbuf);
req.cmd_flags |= REQ_QUIET;
- stat = cdrom_queue_packet_command(drive, &req);
+ stat = ide_cd_queue_pc(drive, &req);
if (stat == 0) {
*capacity = 1 + be32_to_cpu(capbuf.lba);
*sectors_per_frame =
@@ -2236,7 +1438,7 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
{
struct request req;
- cdrom_prepare_request(drive, &req);
+ ide_cd_init_rq(drive, &req);
req.sense = sense;
req.data = buf;
@@ -2251,12 +1453,11 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
if (msf_flag)
req.cmd[1] = 2;
- return cdrom_queue_packet_command(drive, &req);
+ return ide_cd_queue_pc(drive, &req);
}
-
/* Try to read the entire TOC for the disk into our internal buffer. */
-static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
+int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
{
int stat, ntracks, i;
struct cdrom_info *info = drive->driver_data;
@@ -2283,7 +1484,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
If it is, just return. */
(void) cdrom_check_status(drive, sense);
- if (CDROM_STATE_FLAGS(drive)->toc_valid)
+ if (info->cd_flags & IDE_CD_FLAG_TOC_VALID)
return 0;
/* Try to get the total cdrom capacity and sector size. */
@@ -2305,12 +1506,10 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
if (stat)
return stat;
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
+ if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
+ toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
}
-#endif /* not STANDARD_ATAPI */
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
if (ntracks <= 0)
@@ -2342,16 +1541,13 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
(ntracks + 1) *
sizeof(struct atapi_toc_entry),
sense);
- if (stat) {
+ if (stat)
return stat;
- }
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bin2bcd(CDROM_LEADOUT);
- toc->hdr.last_track = bin2bcd(CDROM_LEADOUT);
- } else
-#endif /* not STANDARD_ATAPI */
- {
+
+ if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ } else {
toc->hdr.first_track = CDROM_LEADOUT;
toc->hdr.last_track = CDROM_LEADOUT;
}
@@ -2362,21 +1558,17 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
toc->hdr.toc_length = ntohs (toc->hdr.toc_length);
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
+ if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+ toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
+ toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
}
-#endif /* not STANDARD_ATAPI */
- for (i=0; i<=ntracks; i++) {
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
- if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd)
- toc->ent[i].track = bcd2bin(toc->ent[i].track);
+ for (i = 0; i <= ntracks; i++) {
+ if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) {
+ if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD)
+ toc->ent[i].track = BCD2BIN(toc->ent[i].track);
msf_from_bcd(&toc->ent[i].addr.msf);
}
-#endif /* not STANDARD_ATAPI */
toc->ent[i].addr.lba = msf_to_lba (toc->ent[i].addr.msf.minute,
toc->ent[i].addr.msf.second,
toc->ent[i].addr.msf.frame);
@@ -2396,8 +1588,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
}
-#if ! STANDARD_ATAPI
- if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
+ if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) {
/* Re-read multisession information using MSF format */
stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
sizeof(ms_tmp), sense);
@@ -2409,7 +1600,6 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
ms_tmp.ent.addr.msf.second,
ms_tmp.ent.addr.msf.frame);
}
-#endif /* not STANDARD_ATAPI */
toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
@@ -2422,278 +1612,22 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
}
/* Remember that we've read this stuff. */
- CDROM_STATE_FLAGS(drive)->toc_valid = 1;
+ info->cd_flags |= IDE_CD_FLAG_TOC_VALID;
return 0;
}
-
-static int cdrom_read_subchannel(ide_drive_t *drive, int format, char *buf,
- int buflen, struct request_sense *sense)
-{
- struct request req;
-
- cdrom_prepare_request(drive, &req);
-
- req.sense = sense;
- req.data = buf;
- req.data_len = buflen;
- req.cmd[0] = GPCMD_READ_SUBCHANNEL;
- req.cmd[1] = 2; /* MSF addressing */
- req.cmd[2] = 0x40; /* request subQ data */
- req.cmd[3] = format;
- req.cmd[7] = (buflen >> 8);
- req.cmd[8] = (buflen & 0xff);
- return cdrom_queue_packet_command(drive, &req);
-}
-
-/* ATAPI cdrom drives are free to select the speed you request or any slower
- rate :-( Requesting too fast a speed will _not_ produce an error. */
-static int cdrom_select_speed(ide_drive_t *drive, int speed,
- struct request_sense *sense)
-{
- struct request req;
- cdrom_prepare_request(drive, &req);
-
- req.sense = sense;
- if (speed == 0)
- speed = 0xffff; /* set to max */
- else
- speed *= 177; /* Nx to kbytes/s */
-
- req.cmd[0] = GPCMD_SET_SPEED;
- /* Read Drive speed in kbytes/second MSB */
- req.cmd[2] = (speed >> 8) & 0xff;
- /* Read Drive speed in kbytes/second LSB */
- req.cmd[3] = speed & 0xff;
- if (CDROM_CONFIG_FLAGS(drive)->cd_r ||
- CDROM_CONFIG_FLAGS(drive)->cd_rw ||
- CDROM_CONFIG_FLAGS(drive)->dvd_r) {
- /* Write Drive speed in kbytes/second MSB */
- req.cmd[4] = (speed >> 8) & 0xff;
- /* Write Drive speed in kbytes/second LSB */
- req.cmd[5] = speed & 0xff;
- }
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-static int cdrom_play_audio(ide_drive_t *drive, int lba_start, int lba_end)
-{
- struct request_sense sense;
- struct request req;
-
- cdrom_prepare_request(drive, &req);
-
- req.sense = &sense;
- req.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
- lba_to_msf(lba_start, &req.cmd[3], &req.cmd[4], &req.cmd[5]);
- lba_to_msf(lba_end-1, &req.cmd[6], &req.cmd[7], &req.cmd[8]);
-
- return cdrom_queue_packet_command(drive, &req);
-}
-
-static int cdrom_get_toc_entry(ide_drive_t *drive, int track,
- struct atapi_toc_entry **ent)
-{
- struct cdrom_info *info = drive->driver_data;
- struct atapi_toc *toc = info->toc;
- int ntracks;
-
- /*
- * don't serve cached data, if the toc isn't valid
- */
- if (!CDROM_STATE_FLAGS(drive)->toc_valid)
- return -EINVAL;
-
- /* Check validity of requested track number. */
- ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
- if (toc->hdr.first_track == CDROM_LEADOUT) ntracks = 0;
- if (track == CDROM_LEADOUT)
- *ent = &toc->ent[ntracks];
- else if (track < toc->hdr.first_track ||
- track > toc->hdr.last_track)
- return -EINVAL;
- else
- *ent = &toc->ent[track - toc->hdr.first_track];
-
- return 0;
-}
-
-/* the generic packet interface to cdrom.c */
-static int ide_cdrom_packet(struct cdrom_device_info *cdi,
- struct packet_command *cgc)
-{
- struct request req;
- ide_drive_t *drive = cdi->handle;
-
- if (cgc->timeout <= 0)
- cgc->timeout = ATAPI_WAIT_PC;
-
- /* here we queue the commands from the uniform CD-ROM
- layer. the packet must be complete, as we do not
- touch it at all. */
- cdrom_prepare_request(drive, &req);
- memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
- if (cgc->sense)
- memset(cgc->sense, 0, sizeof(struct request_sense));
- req.data = cgc->buffer;
- req.data_len = cgc->buflen;
- req.timeout = cgc->timeout;
-
- if (cgc->quiet)
- req.cmd_flags |= REQ_QUIET;
-
- req.sense = cgc->sense;
- cgc->stat = cdrom_queue_packet_command(drive, &req);
- if (!cgc->stat)
- cgc->buflen -= req.data_len;
- return cgc->stat;
-}
-
-static
-int ide_cdrom_audio_ioctl (struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg)
-
-{
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *info = drive->driver_data;
- int stat;
-
- switch (cmd) {
- /*
- * emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
- * atapi doesn't support it
- */
- case CDROMPLAYTRKIND: {
- unsigned long lba_start, lba_end;
- struct cdrom_ti *ti = arg;
- struct atapi_toc_entry *first_toc, *last_toc;
-
- stat = cdrom_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
- if (stat)
- return stat;
-
- stat = cdrom_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
- if (stat)
- return stat;
-
- if (ti->cdti_trk1 != CDROM_LEADOUT)
- ++last_toc;
- lba_start = first_toc->addr.lba;
- lba_end = last_toc->addr.lba;
-
- if (lba_end <= lba_start)
- return -EINVAL;
-
- return cdrom_play_audio(drive, lba_start, lba_end);
- }
-
- case CDROMREADTOCHDR: {
- struct cdrom_tochdr *tochdr = arg;
- struct atapi_toc *toc;
-
- /* Make sure our saved TOC is valid. */
- stat = cdrom_read_toc(drive, NULL);
- if (stat)
- return stat;
-
- toc = info->toc;
- tochdr->cdth_trk0 = toc->hdr.first_track;
- tochdr->cdth_trk1 = toc->hdr.last_track;
-
- return 0;
- }
-
- case CDROMREADTOCENTRY: {
- struct cdrom_tocentry *tocentry = arg;
- struct atapi_toc_entry *toce;
-
- stat = cdrom_get_toc_entry(drive, tocentry->cdte_track, &toce);
- if (stat)
- return stat;
-
- tocentry->cdte_ctrl = toce->control;
- tocentry->cdte_adr = toce->adr;
- if (tocentry->cdte_format == CDROM_MSF) {
- lba_to_msf (toce->addr.lba,
- &tocentry->cdte_addr.msf.minute,
- &tocentry->cdte_addr.msf.second,
- &tocentry->cdte_addr.msf.frame);
- } else
- tocentry->cdte_addr.lba = toce->addr.lba;
-
- return 0;
- }
-
- default:
- return -EINVAL;
- }
-}
-
-static
-int ide_cdrom_reset (struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
- struct request req;
- int ret;
-
- cdrom_prepare_request(drive, &req);
- req.cmd_type = REQ_TYPE_SPECIAL;
- req.cmd_flags = REQ_QUIET;
- ret = ide_do_drive_cmd(drive, &req, ide_wait);
-
- /*
- * A reset will unlock the door. If it was previously locked,
- * lock it again.
- */
- if (CDROM_STATE_FLAGS(drive)->door_locked)
- (void) cdrom_lockdoor(drive, 1, &sense);
-
- return ret;
-}
-
-
-static
-int ide_cdrom_tray_move (struct cdrom_device_info *cdi, int position)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
-
- if (position) {
- int stat = cdrom_lockdoor(drive, 0, &sense);
- if (stat)
- return stat;
- }
-
- return cdrom_eject(drive, !position, &sense);
-}
-
-static
-int ide_cdrom_lock_door (struct cdrom_device_info *cdi, int lock)
-{
- ide_drive_t *drive = cdi->handle;
- return cdrom_lockdoor(drive, lock, NULL);
-}
-
-static
-int ide_cdrom_get_capabilities(ide_drive_t *drive, struct atapi_capabilities_page *cap)
+int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
{
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *cdi = &info->devinfo;
struct packet_command cgc;
- int stat, attempts = 3, size = sizeof(*cap);
+ int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
- /*
- * ACER50 (and others?) require the full spec length mode sense
- * page capabilities size, but older drives break.
- */
- if (!(!strcmp(drive->id->model, "ATAPI CD ROM DRIVE 50X MAX") ||
- !strcmp(drive->id->model, "WPI CDS-32X")))
- size -= sizeof(cap->pad);
+ if ((info->cd_flags & IDE_CD_FLAG_FULL_CAPS_PAGE) == 0)
+ size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
- init_cdrom_command(&cgc, cap, size, CGC_DATA_UNKNOWN);
+ init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
do { /* we seem to get stat=0x01,err=0x00 the first time (??) */
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
if (!stat)
@@ -2702,177 +1636,33 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, struct atapi_capabilities_pag
return stat;
}
-static
-void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page *cap)
-{
- /* The ACER/AOpen 24X cdrom has the speed fields byte-swapped */
- if (!drive->id->model[0] &&
- !strncmp(drive->id->fw_rev, "241N", 4)) {
- CDROM_STATE_FLAGS(drive)->current_speed =
- (le16_to_cpu(cap->curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS(drive)->max_speed =
- (le16_to_cpu(cap->maxspeed) + (176/2)) / 176;
- } else {
- CDROM_STATE_FLAGS(drive)->current_speed =
- (be16_to_cpu(cap->curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS(drive)->max_speed =
- (be16_to_cpu(cap->maxspeed) + (176/2)) / 176;
- }
-}
-
-static
-int ide_cdrom_select_speed (struct cdrom_device_info *cdi, int speed)
-{
- ide_drive_t *drive = cdi->handle;
- struct request_sense sense;
- struct atapi_capabilities_page cap;
- int stat;
-
- if ((stat = cdrom_select_speed(drive, speed, &sense)) < 0)
- return stat;
-
- if (!ide_cdrom_get_capabilities(drive, &cap)) {
- ide_cdrom_update_speed(drive, &cap);
- cdi->speed = CDROM_STATE_FLAGS(drive)->current_speed;
- }
- return 0;
-}
-
-/*
- * add logic to try GET_EVENT command first to check for media and tray
- * status. this should be supported by newer cd-r/w and all DVD etc
- * drives
- */
-static
-int ide_cdrom_drive_status (struct cdrom_device_info *cdi, int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- struct media_event_desc med;
- struct request_sense sense;
- int stat;
-
- if (slot_nr != CDSL_CURRENT)
- return -EINVAL;
-
- stat = cdrom_check_status(drive, &sense);
- if (!stat || sense.sense_key == UNIT_ATTENTION)
- return CDS_DISC_OK;
-
- if (!cdrom_get_media_event(cdi, &med)) {
- if (med.media_present)
- return CDS_DISC_OK;
- else if (med.door_open)
- return CDS_TRAY_OPEN;
- else
- return CDS_NO_DISC;
- }
-
- if (sense.sense_key == NOT_READY && sense.asc == 0x04 && sense.ascq == 0x04)
- return CDS_DISC_OK;
-
- /*
- * If not using Mt Fuji extended media tray reports,
- * just return TRAY_OPEN since ATAPI doesn't provide
- * any other way to detect this...
- */
- if (sense.sense_key == NOT_READY) {
- if (sense.asc == 0x3a && sense.ascq == 1)
- return CDS_NO_DISC;
- else
- return CDS_TRAY_OPEN;
- }
- return CDS_DRIVE_NOT_READY;
-}
-
-static
-int ide_cdrom_get_last_session (struct cdrom_device_info *cdi,
- struct cdrom_multisession *ms_info)
+void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
{
- struct atapi_toc *toc;
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *info = drive->driver_data;
- struct request_sense sense;
- int ret;
-
- if (!CDROM_STATE_FLAGS(drive)->toc_valid || info->toc == NULL)
- if ((ret = cdrom_read_toc(drive, &sense)))
- return ret;
-
- toc = info->toc;
- ms_info->addr.lba = toc->last_session_lba;
- ms_info->xa_flag = toc->xa_flag;
-
- return 0;
-}
-
-static
-int ide_cdrom_get_mcn (struct cdrom_device_info *cdi,
- struct cdrom_mcn *mcn_info)
-{
- int stat;
- char mcnbuf[24];
- ide_drive_t *drive = cdi->handle;
-
-/* get MCN */
- if ((stat = cdrom_read_subchannel(drive, 2, mcnbuf, sizeof (mcnbuf), NULL)))
- return stat;
-
- memcpy (mcn_info->medium_catalog_number, mcnbuf+9,
- sizeof (mcn_info->medium_catalog_number)-1);
- mcn_info->medium_catalog_number[sizeof (mcn_info->medium_catalog_number)-1]
- = '\0';
-
- return 0;
-}
-
-
+ struct cdrom_info *cd = drive->driver_data;
+ u16 curspeed, maxspeed;
-/****************************************************************************
- * Other driver requests (open, close, check media change).
- */
+ curspeed = *(u16 *)&buf[8 + 14];
+ maxspeed = *(u16 *)&buf[8 + 8];
-static
-int ide_cdrom_check_media_change_real (struct cdrom_device_info *cdi,
- int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- int retval;
-
- if (slot_nr == CDSL_CURRENT) {
- (void) cdrom_check_status(drive, NULL);
- retval = CDROM_STATE_FLAGS(drive)->media_changed;
- CDROM_STATE_FLAGS(drive)->media_changed = 0;
- return retval;
+ if (cd->cd_flags & IDE_CD_FLAG_LE_SPEED_FIELDS) {
+ curspeed = le16_to_cpu(curspeed);
+ maxspeed = le16_to_cpu(maxspeed);
} else {
- return -EINVAL;
+ curspeed = be16_to_cpu(curspeed);
+ maxspeed = be16_to_cpu(maxspeed);
}
-}
-
-static
-int ide_cdrom_open_real (struct cdrom_device_info *cdi, int purpose)
-{
- return 0;
+ cd->current_speed = (curspeed + (176/2)) / 176;
+ cd->max_speed = (maxspeed + (176/2)) / 176;
}
-/*
- * Close down the device. Invalidate all cached blocks.
- */
-
-static
-void ide_cdrom_release_real (struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
-
- if (!cdi->use_count)
- CDROM_STATE_FLAGS(drive)->toc_valid = 0;
-}
+#define IDE_CD_CAPABILITIES \
+ (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
+ CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
+ CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
+ CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
+ CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
-
-
-/****************************************************************************
- * Device initialization.
- */
static struct cdrom_device_ops ide_cdrom_dops = {
.open = ide_cdrom_open_real,
.release = ide_cdrom_release_real,
@@ -2885,14 +1675,7 @@ static struct cdrom_device_ops ide_cdrom_dops = {
.get_mcn = ide_cdrom_get_mcn,
.reset = ide_cdrom_reset,
.audio_ioctl = ide_cdrom_audio_ioctl,
- .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
- CDC_SELECT_SPEED | CDC_SELECT_DISC |
- CDC_MULTI_SESSION | CDC_MCN |
- CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET |
- CDC_DRIVE_STATUS | CDC_CD_R |
- CDC_CD_RW | CDC_DVD | CDC_DVD_R| CDC_DVD_RAM |
- CDC_GENERIC_PACKET | CDC_MO_DRIVE | CDC_MRW |
- CDC_MRW_W | CDC_RAM,
+ .capability = IDE_CD_CAPABILITIES,
.generic_packet = ide_cdrom_packet,
};
@@ -2902,35 +1685,12 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots)
struct cdrom_device_info *devinfo = &info->devinfo;
devinfo->ops = &ide_cdrom_dops;
- devinfo->mask = 0;
- devinfo->speed = CDROM_STATE_FLAGS(drive)->current_speed;
+ devinfo->speed = info->current_speed;
devinfo->capacity = nslots;
devinfo->handle = drive;
strcpy(devinfo->name, drive->name);
-
- /* set capability mask to match the probe. */
- if (!CDROM_CONFIG_FLAGS(drive)->cd_r)
- devinfo->mask |= CDC_CD_R;
- if (!CDROM_CONFIG_FLAGS(drive)->cd_rw)
- devinfo->mask |= CDC_CD_RW;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd)
- devinfo->mask |= CDC_DVD;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd_r)
- devinfo->mask |= CDC_DVD_R;
- if (!CDROM_CONFIG_FLAGS(drive)->dvd_ram)
- devinfo->mask |= CDC_DVD_RAM;
- if (!CDROM_CONFIG_FLAGS(drive)->is_changer)
- devinfo->mask |= CDC_SELECT_DISC;
- if (!CDROM_CONFIG_FLAGS(drive)->audio_play)
- devinfo->mask |= CDC_PLAY_AUDIO;
- if (!CDROM_CONFIG_FLAGS(drive)->close_tray)
- devinfo->mask |= CDC_CLOSE_TRAY;
- if (!CDROM_CONFIG_FLAGS(drive)->mo_drive)
- devinfo->mask |= CDC_MO_DRIVE;
- if (!CDROM_CONFIG_FLAGS(drive)->ram)
- devinfo->mask |= CDC_RAM;
-
- if (CDROM_CONFIG_FLAGS(drive)->no_speed_select)
+
+ if (info->cd_flags & IDE_CD_FLAG_NO_SPEED_SELECT)
devinfo->mask |= CDC_SELECT_SPEED;
devinfo->disk = info->disk;
@@ -2940,22 +1700,25 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots)
static
int ide_cdrom_probe_capabilities (ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
- struct atapi_capabilities_page cap;
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_device_info *cdi = &cd->devinfo;
+ u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
+ mechtype_t mechtype;
int nslots = 1;
+ cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
+ CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
+ CDC_MO_DRIVE | CDC_RAM);
+
if (drive->media == ide_optical) {
- CDROM_CONFIG_FLAGS(drive)->mo_drive = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
+ cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", drive->name);
return nslots;
}
- if (CDROM_CONFIG_FLAGS(drive)->nec260 ||
- !strcmp(drive->id->model,"STINGRAY 8422 IDE 8X CD-ROM 7-27-95")) {
- CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
+ if (cd->cd_flags & IDE_CD_FLAG_PRE_ATAPI12) {
+ cd->cd_flags &= ~IDE_CD_FLAG_NO_EJECT;
+ cdi->mask &= ~CDC_PLAY_AUDIO;
return nslots;
}
@@ -2969,83 +1732,66 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive)
cdi->handle = drive;
cdi->ops = &ide_cdrom_dops;
- if (ide_cdrom_get_capabilities(drive, &cap))
+ if (ide_cdrom_get_capabilities(drive, buf))
return 0;
- if (cap.lock == 0)
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
- if (cap.eject)
- CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
- if (cap.cd_r_write)
- CDROM_CONFIG_FLAGS(drive)->cd_r = 1;
- if (cap.cd_rw_write) {
- CDROM_CONFIG_FLAGS(drive)->cd_rw = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
- }
- if (cap.test_write)
- CDROM_CONFIG_FLAGS(drive)->test_write = 1;
- if (cap.dvd_ram_read || cap.dvd_r_read || cap.dvd_rom)
- CDROM_CONFIG_FLAGS(drive)->dvd = 1;
- if (cap.dvd_ram_write) {
- CDROM_CONFIG_FLAGS(drive)->dvd_ram = 1;
- CDROM_CONFIG_FLAGS(drive)->ram = 1;
- }
- if (cap.dvd_r_write)
- CDROM_CONFIG_FLAGS(drive)->dvd_r = 1;
- if (cap.audio_play)
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
- if (cap.mechtype == mechtype_caddy || cap.mechtype == mechtype_popup)
- CDROM_CONFIG_FLAGS(drive)->close_tray = 0;
-
- /* Some drives used by Apple don't advertise audio play
- * but they do support reading TOC & audio datas
- */
- if (strcmp(drive->id->model, "MATSHITADVD-ROM SR-8187") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8186") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8176") == 0 ||
- strcmp(drive->id->model, "MATSHITADVD-ROM SR-8174") == 0)
- CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
+ if ((buf[8 + 6] & 0x01) == 0)
+ cd->cd_flags |= IDE_CD_FLAG_NO_DOORLOCK;
+ if (buf[8 + 6] & 0x08)
+ cd->cd_flags &= ~IDE_CD_FLAG_NO_EJECT;
+ if (buf[8 + 3] & 0x01)
+ cdi->mask &= ~CDC_CD_R;
+ if (buf[8 + 3] & 0x02)
+ cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
+ if (buf[8 + 2] & 0x38)
+ cdi->mask &= ~CDC_DVD;
+ if (buf[8 + 3] & 0x20)
+ cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
+ if (buf[8 + 3] & 0x10)
+ cdi->mask &= ~CDC_DVD_R;
+ if ((buf[8 + 4] & 0x01) || (cd->cd_flags & IDE_CD_FLAG_PLAY_AUDIO_OK))
+ cdi->mask &= ~CDC_PLAY_AUDIO;
+
+ mechtype = buf[8 + 6] >> 5;
+ if (mechtype == mechtype_caddy || mechtype == mechtype_popup)
+ cdi->mask |= CDC_CLOSE_TRAY;
-#if ! STANDARD_ATAPI
if (cdi->sanyo_slot > 0) {
- CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
+ cdi->mask &= ~CDC_SELECT_DISC;
nslots = 3;
+ } else if (mechtype == mechtype_individual_changer ||
+ mechtype == mechtype_cartridge_changer) {
+ nslots = cdrom_number_of_slots(cdi);
+ if (nslots > 1)
+ cdi->mask &= ~CDC_SELECT_DISC;
}
- else
-#endif /* not STANDARD_ATAPI */
- if (cap.mechtype == mechtype_individual_changer ||
- cap.mechtype == mechtype_cartridge_changer) {
- if ((nslots = cdrom_number_of_slots(cdi)) > 1) {
- CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
- CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 1;
- }
- }
+ ide_cdrom_update_speed(drive, buf);
- ide_cdrom_update_speed(drive, &cap);
- /* don't print speed if the drive reported 0.
- */
printk(KERN_INFO "%s: ATAPI", drive->name);
- if (CDROM_CONFIG_FLAGS(drive)->max_speed)
- printk(" %dX", CDROM_CONFIG_FLAGS(drive)->max_speed);
- printk(" %s", CDROM_CONFIG_FLAGS(drive)->dvd ? "DVD-ROM" : "CD-ROM");
- if (CDROM_CONFIG_FLAGS(drive)->dvd_r|CDROM_CONFIG_FLAGS(drive)->dvd_ram)
- printk(" DVD%s%s",
- (CDROM_CONFIG_FLAGS(drive)->dvd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS(drive)->dvd_ram)? "-RAM" : "");
+ /* don't print speed if the drive reported 0 */
+ if (cd->max_speed)
+ printk(KERN_CONT " %dX", cd->max_speed);
- if (CDROM_CONFIG_FLAGS(drive)->cd_r|CDROM_CONFIG_FLAGS(drive)->cd_rw)
- printk(" CD%s%s",
- (CDROM_CONFIG_FLAGS(drive)->cd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS(drive)->cd_rw)? "/RW" : "");
+ printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
- if (CDROM_CONFIG_FLAGS(drive)->is_changer)
- printk(" changer w/%d slots", nslots);
- else
- printk(" drive");
+ if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
+ printk(KERN_CONT " DVD%s%s",
+ (cdi->mask & CDC_DVD_R) ? "" : "-R",
+ (cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
- printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size));
+ if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
+ printk(KERN_CONT " CD%s%s",
+ (cdi->mask & CDC_CD_R) ? "" : "-R",
+ (cdi->mask & CDC_CD_RW) ? "" : "/RW");
+
+ if ((cdi->mask & CDC_SELECT_DISC) == 0)
+ printk(KERN_CONT " changer w/%d slots", nslots);
+ else
+ printk(KERN_CONT " drive");
+
+ printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(*(u16 *)&buf[8 + 12]));
return nslots;
}
@@ -3138,11 +1884,74 @@ static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
return 0;
}
+struct cd_list_entry {
+ const char *id_model;
+ const char *id_firmware;
+ unsigned int cd_flags;
+};
+
+static const struct cd_list_entry ide_cd_quirks_list[] = {
+ /* Limit transfer size per interrupt. */
+ { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_CD_FLAG_LIMIT_NFRAMES },
+ { "SAMSUNG CD-ROM SCR-2432", NULL, IDE_CD_FLAG_LIMIT_NFRAMES },
+ /* SCR-3231 doesn't support the SET_CD_SPEED command. */
+ { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_CD_FLAG_NO_SPEED_SELECT },
+ /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
+ { "NEC CD-ROM DRIVE:260", "1.01", IDE_CD_FLAG_TOCADDR_AS_BCD |
+ IDE_CD_FLAG_PRE_ATAPI12, },
+ /* Vertos 300, some versions of this drive like to talk BCD. */
+ { "V003S0DS", NULL, IDE_CD_FLAG_VERTOS_300_SSD, },
+ /* Vertos 600 ESD. */
+ { "V006E0DS", NULL, IDE_CD_FLAG_VERTOS_600_ESD, },
+ /*
+ * Sanyo 3 CD changer uses a non-standard command for CD changing
+ * (by default standard ATAPI support for CD changers is used).
+ */
+ { "CD-ROM CDR-C3 G", NULL, IDE_CD_FLAG_SANYO_3CD },
+ { "CD-ROM CDR-C3G", NULL, IDE_CD_FLAG_SANYO_3CD },
+ { "CD-ROM CDR_C36", NULL, IDE_CD_FLAG_SANYO_3CD },
+ /* Stingray 8X CD-ROM. */
+ { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_CD_FLAG_PRE_ATAPI12},
+ /*
+ * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
+ * mode sense page capabilities size, but older drives break.
+ */
+ { "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_CD_FLAG_FULL_CAPS_PAGE },
+ { "WPI CDS-32X", NULL, IDE_CD_FLAG_FULL_CAPS_PAGE },
+ /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
+ { "", "241N", IDE_CD_FLAG_LE_SPEED_FIELDS },
+ /*
+ * Some drives used by Apple don't advertise audio play
+ * but they do support reading TOC & audio datas.
+ */
+ { "MATSHITADVD-ROM SR-8187", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8186", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8176", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
+ { "MATSHITADVD-ROM SR-8174", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
+ { NULL, NULL, 0 }
+};
+
+static unsigned int ide_cd_flags(struct hd_driveid *id)
+{
+ const struct cd_list_entry *cle = ide_cd_quirks_list;
+
+ while (cle->id_model) {
+ if (strcmp(cle->id_model, id->model) == 0 &&
+ (cle->id_firmware == NULL ||
+ strstr(id->fw_rev, cle->id_firmware)))
+ return cle->cd_flags;
+ cle++;
+ }
+
+ return 0;
+}
+
static
int ide_cdrom_setup (ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_device_info *cdi = &cd->devinfo;
+ struct hd_driveid *id = drive->id;
int nslots;
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
@@ -3153,101 +1962,21 @@ int ide_cdrom_setup (ide_drive_t *drive)
drive->special.all = 0;
- CDROM_STATE_FLAGS(drive)->media_changed = 1;
- CDROM_STATE_FLAGS(drive)->toc_valid = 0;
- CDROM_STATE_FLAGS(drive)->door_locked = 0;
+ cd->cd_flags = IDE_CD_FLAG_MEDIA_CHANGED | IDE_CD_FLAG_NO_EJECT |
+ ide_cd_flags(id);
-#if NO_DOOR_LOCKING
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
-#else
- CDROM_CONFIG_FLAGS(drive)->no_doorlock = 0;
-#endif
+ if ((id->config & 0x0060) == 0x20)
+ cd->cd_flags |= IDE_CD_FLAG_DRQ_INTERRUPT;
- CDROM_CONFIG_FLAGS(drive)->drq_interrupt = ((drive->id->config & 0x0060) == 0x20);
- CDROM_CONFIG_FLAGS(drive)->is_changer = 0;
- CDROM_CONFIG_FLAGS(drive)->cd_r = 0;
- CDROM_CONFIG_FLAGS(drive)->cd_rw = 0;
- CDROM_CONFIG_FLAGS(drive)->test_write = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd_r = 0;
- CDROM_CONFIG_FLAGS(drive)->dvd_ram = 0;
- CDROM_CONFIG_FLAGS(drive)->no_eject = 1;
- CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 0;
- CDROM_CONFIG_FLAGS(drive)->audio_play = 0;
- CDROM_CONFIG_FLAGS(drive)->close_tray = 1;
-
- /* limit transfer size per interrupt. */
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 0;
- /* a testament to the nice quality of Samsung drives... */
- if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430"))
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2432"))
- CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
- /* the 3231 model does not support the SET_CD_SPEED command */
- else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
- CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1;
-
-#if ! STANDARD_ATAPI
- /* by default Sanyo 3 CD changer support is turned off and
- ATAPI Rev 2.2+ standard support for CD changers is used */
- cdi->sanyo_slot = 0;
-
- CDROM_CONFIG_FLAGS(drive)->nec260 = 0;
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 0;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 0;
-
- if (strcmp (drive->id->model, "V003S0DS") == 0 &&
- drive->id->fw_rev[4] == '1' &&
- drive->id->fw_rev[6] <= '2') {
- /* Vertos 300.
- Some versions of this drive like to talk BCD. */
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- }
-
- else if (strcmp (drive->id->model, "V006E0DS") == 0 &&
- drive->id->fw_rev[4] == '1' &&
- drive->id->fw_rev[6] <= '2') {
- /* Vertos 600 ESD. */
- CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
- }
- else if (strcmp(drive->id->model, "NEC CD-ROM DRIVE:260") == 0 &&
- strncmp(drive->id->fw_rev, "1.01", 4) == 0) { /* FIXME */
- /* Old NEC260 (not R).
- This drive was released before the 1.2 version
- of the spec. */
- CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->nec260 = 1;
- }
- else if (strcmp(drive->id->model, "WEARNES CDD-120") == 0 &&
- strncmp(drive->id->fw_rev, "A1.1", 4) == 0) { /* FIXME */
- /* Wearnes */
- CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
- CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
- }
- /* Sanyo 3 CD changer uses a non-standard command
- for CD changing */
- else if ((strcmp(drive->id->model, "CD-ROM CDR-C3 G") == 0) ||
- (strcmp(drive->id->model, "CD-ROM CDR-C3G") == 0) ||
- (strcmp(drive->id->model, "CD-ROM CDR_C36") == 0)) {
- /* uses CD in slot 0 when value is set to 3 */
- cdi->sanyo_slot = 3;
- }
-#endif /* not STANDARD_ATAPI */
-
- info->toc = NULL;
- info->buffer = NULL;
- info->sector_buffered = 0;
- info->nsectors_buffered = 0;
- info->changer_info = NULL;
- info->last_block = 0;
- info->start_seek = 0;
+ if ((cd->cd_flags & IDE_CD_FLAG_VERTOS_300_SSD) &&
+ id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ cd->cd_flags |= (IDE_CD_FLAG_TOCTRACKS_AS_BCD |
+ IDE_CD_FLAG_TOCADDR_AS_BCD);
+ else if ((cd->cd_flags & IDE_CD_FLAG_VERTOS_600_ESD) &&
+ id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD;
+ else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD)
+ cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */
nslots = ide_cdrom_probe_capabilities (drive);
@@ -3262,7 +1991,7 @@ int ide_cdrom_setup (ide_drive_t *drive)
if (ide_cdrom_register(drive, nslots)) {
printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name);
- info->devinfo.handle = NULL;
+ cd->devinfo.handle = NULL;
return 1;
}
ide_cdrom_add_settings(drive);
@@ -3302,7 +2031,6 @@ static void ide_cd_release(struct kref *kref)
kfree(info->buffer);
kfree(info->toc);
- kfree(info->changer_info);
if (devinfo->handle == drive && unregister_cdrom(devinfo))
printk(KERN_ERR "%s: %s failed to unregister device from the cdrom "
"driver.\n", __FUNCTION__, drive->name);
@@ -3458,7 +2186,9 @@ static int idecd_revalidate_disk(struct gendisk *disk)
{
struct cdrom_info *info = ide_cd_g(disk);
struct request_sense sense;
- cdrom_read_toc(info->drive, &sense);
+
+ ide_cd_read_toc(info->drive, &sense);
+
return 0;
}
@@ -3533,7 +2263,7 @@ static int ide_cd_probe(ide_drive_t *drive)
goto failed;
}
- cdrom_read_toc(drive, &sense);
+ ide_cd_read_toc(drive, &sense);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
@@ -3556,6 +2286,7 @@ static int __init ide_cdrom_init(void)
}
MODULE_ALIAS("ide:*m-cdrom*");
+MODULE_ALIAS("ide-cd");
module_init(ide_cdrom_init);
module_exit(ide_cdrom_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 1b302fe..22e3751 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ide_cd.h
- *
* Copyright (C) 1996-98 Erik Andersen
* Copyright (C) 1998-2000 Jens Axboe
*/
@@ -10,31 +8,6 @@
#include <linux/cdrom.h>
#include <asm/byteorder.h>
-/* Turn this on to have the driver print out the meanings of the
- ATAPI error codes. This will use up additional kernel-space
- memory, though. */
-
-#ifndef VERBOSE_IDE_CD_ERRORS
-#define VERBOSE_IDE_CD_ERRORS 1
-#endif
-
-
-/* Turning this on will remove code to work around various nonstandard
- ATAPI implementations. If you know your drive follows the standard,
- this will give you a slightly smaller kernel. */
-
-#ifndef STANDARD_ATAPI
-#define STANDARD_ATAPI 0
-#endif
-
-
-/* Turning this on will disable the door-locking functionality.
- This is apparently needed for supermount. */
-
-#ifndef NO_DOOR_LOCKING
-#define NO_DOOR_LOCKING 0
-#endif
-
/*
* typical timeout for packet command
*/
@@ -49,68 +22,47 @@
#endif
#define SECTORS_PER_FRAME (CD_FRAMESIZE >> SECTOR_BITS)
#define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32)
-#define SECTORS_BUFFER (SECTOR_BUFFER_SIZE >> SECTOR_BITS)
-#define SECTORS_MAX (131072 >> SECTOR_BITS)
-
-#define BLOCKS_PER_FRAME (CD_FRAMESIZE / BLOCK_SIZE)
-
-/* special command codes for strategy routine. */
-#define PACKET_COMMAND 4315
-#define REQUEST_SENSE_COMMAND 4316
-#define RESET_DRIVE_COMMAND 4317
-
-
-/* Configuration flags. These describe the capabilities of the drive.
- They generally do not change after initialization, unless we learn
- more about the drive from stuff failing. */
-struct ide_cd_config_flags {
- __u8 drq_interrupt : 1; /* Device sends an interrupt when ready
- for a packet command. */
- __u8 no_doorlock : 1; /* Drive cannot lock the door. */
- __u8 no_eject : 1; /* Drive cannot eject the disc. */
- __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */
- __u8 playmsf_as_bcd : 1; /* PLAYMSF command takes BCD args. */
- __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */
- __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
- __u8 subchan_as_bcd : 1; /* Subchannel info is in BCD. */
- __u8 is_changer : 1; /* Drive is a changer. */
- __u8 cd_r : 1; /* Drive can write to CD-R media . */
- __u8 cd_rw : 1; /* Drive can write to CD-R/W media . */
- __u8 dvd : 1; /* Drive is a DVD-ROM */
- __u8 dvd_r : 1; /* Drive can write DVD-R */
- __u8 dvd_ram : 1; /* Drive can write DVD-RAM */
- __u8 ram : 1; /* generic WRITE (dvd-ram/mrw) */
- __u8 test_write : 1; /* Drive can fake writes */
- __u8 supp_disc_present : 1; /* Changer can report exact contents
- of slots. */
- __u8 limit_nframes : 1; /* Drive does not provide data in
- multiples of SECTOR_SIZE when more
- than one interrupt is needed. */
- __u8 seeking : 1; /* Seeking in progress */
- __u8 audio_play : 1; /* can do audio related commands */
- __u8 close_tray : 1; /* can close the tray */
- __u8 writing : 1; /* pseudo write in progress */
- __u8 mo_drive : 1; /* drive is an MO device */
- __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */
- __u8 reserved : 1;
- byte max_speed; /* Max speed of the drive */
-};
-#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))
-
-/* State flags. These give information about the current state of the
- drive, and will change during normal operation. */
-struct ide_cd_state_flags {
- __u8 media_changed : 1; /* Driver has noticed a media change. */
- __u8 toc_valid : 1; /* Saved TOC information is current. */
- __u8 door_locked : 1; /* We think that the drive door is locked. */
- __u8 writing : 1; /* the drive is currently writing */
- __u8 reserved : 4;
- byte current_speed; /* Current speed of the drive */
+/* Capabilities Page size including 8 bytes of Mode Page Header */
+#define ATAPI_CAPABILITIES_PAGE_SIZE (8 + 20)
+#define ATAPI_CAPABILITIES_PAGE_PAD_SIZE 4
+
+enum {
+ /* Device sends an interrupt when ready for a packet command. */
+ IDE_CD_FLAG_DRQ_INTERRUPT = (1 << 0),
+ /* Drive cannot lock the door. */
+ IDE_CD_FLAG_NO_DOORLOCK = (1 << 1),
+ /* Drive cannot eject the disc. */
+ IDE_CD_FLAG_NO_EJECT = (1 << 2),
+ /* Drive is a pre ATAPI 1.2 drive. */
+ IDE_CD_FLAG_PRE_ATAPI12 = (1 << 3),
+ /* TOC addresses are in BCD. */
+ IDE_CD_FLAG_TOCADDR_AS_BCD = (1 << 4),
+ /* TOC track numbers are in BCD. */
+ IDE_CD_FLAG_TOCTRACKS_AS_BCD = (1 << 5),
+ /*
+ * Drive does not provide data in multiples of SECTOR_SIZE
+ * when more than one interrupt is needed.
+ */
+ IDE_CD_FLAG_LIMIT_NFRAMES = (1 << 6),
+ /* Seeking in progress. */
+ IDE_CD_FLAG_SEEKING = (1 << 7),
+ /* Driver has noticed a media change. */
+ IDE_CD_FLAG_MEDIA_CHANGED = (1 << 8),
+ /* Saved TOC information is current. */
+ IDE_CD_FLAG_TOC_VALID = (1 << 9),
+ /* We think that the drive door is locked. */
+ IDE_CD_FLAG_DOOR_LOCKED = (1 << 10),
+ /* SET_CD_SPEED command is unsupported. */
+ IDE_CD_FLAG_NO_SPEED_SELECT = (1 << 11),
+ IDE_CD_FLAG_VERTOS_300_SSD = (1 << 12),
+ IDE_CD_FLAG_VERTOS_600_ESD = (1 << 13),
+ IDE_CD_FLAG_SANYO_3CD = (1 << 14),
+ IDE_CD_FLAG_FULL_CAPS_PAGE = (1 << 15),
+ IDE_CD_FLAG_PLAY_AUDIO_OK = (1 << 16),
+ IDE_CD_FLAG_LE_SPEED_FIELDS = (1 << 17),
};
-#define CDROM_STATE_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->state_flags))
-
/* Structure of a MSF cdrom address. */
struct atapi_msf {
byte reserved;
@@ -155,310 +107,6 @@ struct atapi_toc {
/* One extra for the leadout. */
};
-
-/* This structure is annoyingly close to, but not identical with,
- the cdrom_subchnl structure from cdrom.h. */
-struct atapi_cdrom_subchnl {
- u_char acdsc_reserved;
- u_char acdsc_audiostatus;
- u_short acdsc_length;
- u_char acdsc_format;
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- u_char acdsc_ctrl: 4;
- u_char acdsc_adr: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- u_char acdsc_adr: 4;
- u_char acdsc_ctrl: 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- u_char acdsc_trk;
- u_char acdsc_ind;
- union {
- struct atapi_msf msf;
- int lba;
- } acdsc_absaddr;
- union {
- struct atapi_msf msf;
- int lba;
- } acdsc_reladdr;
-};
-
-
-
-/* This should probably go into cdrom.h along with the other
- * generic stuff now in the Mt. Fuji spec.
- */
-struct atapi_capabilities_page {
- struct mode_page_header header;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 parameters_saveable : 1;
- __u8 reserved1 : 1;
- __u8 page_code : 6;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 page_code : 6;
- __u8 reserved1 : 1;
- __u8 parameters_saveable : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
- byte page_length;
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 2;
- /* Drive supports reading of DVD-RAM discs */
- __u8 dvd_ram_read : 1;
- /* Drive supports reading of DVD-R discs */
- __u8 dvd_r_read : 1;
- /* Drive supports reading of DVD-ROM discs */
- __u8 dvd_rom : 1;
- /* Drive supports reading CD-R discs with addressing method 2 */
- __u8 method2 : 1; /* reserved in 1.2 */
- /* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */
- __u8 cd_rw_read : 1; /* reserved in 1.2 */
- /* Drive supports read from CD-R discs (orange book, part II) */
- __u8 cd_r_read : 1; /* reserved in 1.2 */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- /* Drive supports read from CD-R discs (orange book, part II) */
- __u8 cd_r_read : 1; /* reserved in 1.2 */
- /* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */
- __u8 cd_rw_read : 1; /* reserved in 1.2 */
- /* Drive supports reading CD-R discs with addressing method 2 */
- __u8 method2 : 1;
- /* Drive supports reading of DVD-ROM discs */
- __u8 dvd_rom : 1;
- /* Drive supports reading of DVD-R discs */
- __u8 dvd_r_read : 1;
- /* Drive supports reading of DVD-RAM discs */
- __u8 dvd_ram_read : 1;
- __u8 reserved2 : 2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved3 : 2;
- /* Drive can write DVD-RAM discs */
- __u8 dvd_ram_write : 1;
- /* Drive can write DVD-R discs */
- __u8 dvd_r_write : 1;
- __u8 reserved3a : 1;
- /* Drive can fake writes */
- __u8 test_write : 1;
- /* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */
- __u8 cd_rw_write : 1; /* reserved in 1.2 */
- /* Drive supports write to CD-R discs (orange book, part II) */
- __u8 cd_r_write : 1; /* reserved in 1.2 */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- /* Drive can write to CD-R discs (orange book, part II) */
- __u8 cd_r_write : 1; /* reserved in 1.2 */
- /* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */
- __u8 cd_rw_write : 1; /* reserved in 1.2 */
- /* Drive can fake writes */
- __u8 test_write : 1;
- __u8 reserved3a : 1;
- /* Drive can write DVD-R discs */
- __u8 dvd_r_write : 1;
- /* Drive can write DVD-RAM discs */
- __u8 dvd_ram_write : 1;
- __u8 reserved3 : 2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved4 : 1;
- /* Drive can read multisession discs. */
- __u8 multisession : 1;
- /* Drive can read mode 2, form 2 data. */
- __u8 mode2_form2 : 1;
- /* Drive can read mode 2, form 1 (XA) data. */
- __u8 mode2_form1 : 1;
- /* Drive supports digital output on port 2. */
- __u8 digport2 : 1;
- /* Drive supports digital output on port 1. */
- __u8 digport1 : 1;
- /* Drive can deliver a composite audio/video data stream. */
- __u8 composite : 1;
- /* Drive supports audio play operations. */
- __u8 audio_play : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- /* Drive supports audio play operations. */
- __u8 audio_play : 1;
- /* Drive can deliver a composite audio/video data stream. */
- __u8 composite : 1;
- /* Drive supports digital output on port 1. */
- __u8 digport1 : 1;
- /* Drive supports digital output on port 2. */
- __u8 digport2 : 1;
- /* Drive can read mode 2, form 1 (XA) data. */
- __u8 mode2_form1 : 1;
- /* Drive can read mode 2, form 2 data. */
- __u8 mode2_form2 : 1;
- /* Drive can read multisession discs. */
- __u8 multisession : 1;
- __u8 reserved4 : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved5 : 1;
- /* Drive can return Media Catalog Number (UPC) info. */
- __u8 upc : 1;
- /* Drive can return International Standard Recording Code info. */
- __u8 isrc : 1;
- /* Drive supports C2 error pointers. */
- __u8 c2_pointers : 1;
- /* R-W data will be returned deinterleaved and error corrected. */
- __u8 rw_corr : 1;
- /* Subchannel reads can return combined R-W information. */
- __u8 rw_supported : 1;
- /* Drive can continue a read cdda operation from a loss of streaming.*/
- __u8 cdda_accurate : 1;
- /* Drive can read Red Book audio data. */
- __u8 cdda : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- /* Drive can read Red Book audio data. */
- __u8 cdda : 1;
- /* Drive can continue a read cdda operation from a loss of streaming.*/
- __u8 cdda_accurate : 1;
- /* Subchannel reads can return combined R-W information. */
- __u8 rw_supported : 1;
- /* R-W data will be returned deinterleaved and error corrected. */
- __u8 rw_corr : 1;
- /* Drive supports C2 error pointers. */
- __u8 c2_pointers : 1;
- /* Drive can return International Standard Recording Code info. */
- __u8 isrc : 1;
- /* Drive can return Media Catalog Number (UPC) info. */
- __u8 upc : 1;
- __u8 reserved5 : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- /* Drive mechanism types. */
- mechtype_t mechtype : 3;
- __u8 reserved6 : 1;
- /* Drive can eject a disc or changer cartridge. */
- __u8 eject : 1;
- /* State of prevent/allow jumper. */
- __u8 prevent_jumper : 1;
- /* Present state of door lock. */
- __u8 lock_state : 1;
- /* Drive can lock the door. */
- __u8 lock : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-
- /* Drive can lock the door. */
- __u8 lock : 1;
- /* Present state of door lock. */
- __u8 lock_state : 1;
- /* State of prevent/allow jumper. */
- __u8 prevent_jumper : 1;
- /* Drive can eject a disc or changer cartridge. */
- __u8 eject : 1;
- __u8 reserved6 : 1;
- /* Drive mechanism types. */
- mechtype_t mechtype : 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved7 : 4;
- /* Drive supports software slot selection. */
- __u8 sss : 1; /* reserved in 1.2 */
- /* Changer can report exact contents of slots. */
- __u8 disc_present : 1; /* reserved in 1.2 */
- /* Audio for each channel can be muted independently. */
- __u8 separate_mute : 1;
- /* Audio level for each channel can be controlled independently. */
- __u8 separate_volume : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-
- /* Audio level for each channel can be controlled independently. */
- __u8 separate_volume : 1;
- /* Audio for each channel can be muted independently. */
- __u8 separate_mute : 1;
- /* Changer can report exact contents of slots. */
- __u8 disc_present : 1; /* reserved in 1.2 */
- /* Drive supports software slot selection. */
- __u8 sss : 1; /* reserved in 1.2 */
- __u8 reserved7 : 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
- /* Note: the following four fields are returned in big-endian form. */
- /* Maximum speed (in kB/s). */
- unsigned short maxspeed;
- /* Number of discrete volume levels. */
- unsigned short n_vol_levels;
- /* Size of cache in drive, in kB. */
- unsigned short buffer_size;
- /* Current speed (in kB/s). */
- unsigned short curspeed;
- char pad[4];
-};
-
-
-struct atapi_mechstat_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 fault : 1;
- __u8 changer_state : 2;
- __u8 curslot : 5;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 curslot : 5;
- __u8 changer_state : 2;
- __u8 fault : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 mech_state : 3;
- __u8 door_open : 1;
- __u8 reserved1 : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 reserved1 : 4;
- __u8 door_open : 1;
- __u8 mech_state : 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
- byte curlba[3];
- byte nslots;
- __u16 slot_tablelen;
-};
-
-
-struct atapi_slot {
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 disc_present : 1;
- __u8 reserved1 : 6;
- __u8 change : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 change : 1;
- __u8 reserved1 : 6;
- __u8 disc_present : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-
- byte reserved2[3];
-};
-
-struct atapi_changer_info {
- struct atapi_mechstat_header hdr;
- struct atapi_slot slots[0];
-};
-
/* Extra per-device info for cdrom drives. */
struct cdrom_info {
ide_drive_t *drive;
@@ -483,11 +131,11 @@ struct cdrom_info {
int dma;
unsigned long last_block;
unsigned long start_seek;
- /* Buffer to hold mechanism status and changer slot table. */
- struct atapi_changer_info *changer_info;
- struct ide_cd_config_flags config_flags;
- struct ide_cd_state_flags state_flags;
+ unsigned int cd_flags;
+
+ u8 max_speed; /* Max speed of the drive. */
+ u8 current_speed; /* Current speed of the drive. */
/* Per-device info needed by cdrom.c generic driver. */
struct cdrom_device_info devinfo;
@@ -495,250 +143,30 @@ struct cdrom_info {
unsigned long write_timeout;
};
-/****************************************************************************
- * Descriptions of ATAPI error codes.
- */
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-
-/* ATAPI sense keys (from table 140 of ATAPI 2.6) */
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define BLANK_CHECK 0x08
-#define ABORTED_COMMAND 0x0b
-#define MISCOMPARE 0x0e
-
-
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-#if VERBOSE_IDE_CD_ERRORS
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned short packet_command;
- const char * const text;
-} packet_command_texts[] = {
- { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
- { GPCMD_REQUEST_SENSE, "Request Sense" },
- { GPCMD_FORMAT_UNIT, "Format Unit" },
- { GPCMD_INQUIRY, "Inquiry" },
- { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
- { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
- { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
- { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
- { GPCMD_READ_10, "Read 10" },
- { GPCMD_WRITE_10, "Write 10" },
- { GPCMD_SEEK, "Seek" },
- { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
- { GPCMD_VERIFY_10, "Verify 10" },
- { GPCMD_FLUSH_CACHE, "Flush Cache" },
- { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
- { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
- { GPCMD_READ_HEADER, "Read Header" },
- { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
- { GPCMD_GET_CONFIGURATION, "Get Configuration" },
- { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
- { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
- { GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" },
- { GPCMD_PAUSE_RESUME, "Pause/Resume" },
- { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
- { GPCMD_READ_DISC_INFO, "Read Disc Info" },
- { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
- { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
- { GPCMD_SEND_OPC, "Send OPC" },
- { GPCMD_MODE_SELECT_10, "Mode Select 10" },
- { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
- { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
- { GPCMD_CLOSE_TRACK, "Close Track" },
- { GPCMD_BLANK, "Blank" },
- { GPCMD_SEND_EVENT, "Send Event" },
- { GPCMD_SEND_KEY, "Send Key" },
- { GPCMD_REPORT_KEY, "Report Key" },
- { GPCMD_LOAD_UNLOAD, "Load/Unload" },
- { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
- { GPCMD_READ_12, "Read 12" },
- { GPCMD_GET_PERFORMANCE, "Get Performance" },
- { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
- { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
- { GPCMD_SET_STREAMING, "Set Streaming" },
- { GPCMD_READ_CD_MSF, "Read CD MSF" },
- { GPCMD_SCAN, "Scan" },
- { GPCMD_SET_SPEED, "Set Speed" },
- { GPCMD_PLAY_CD, "Play CD" },
- { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
- { GPCMD_READ_CD, "Read CD" },
-};
-
-
-
-/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const char * const sense_key_texts[16] = {
- "No sense data",
- "Recovered error",
- "Not ready",
- "Medium error",
- "Hardware error",
- "Illegal request",
- "Unit attention",
- "Data protect",
- "Blank check",
- "(reserved)",
- "(reserved)",
- "Aborted command",
- "(reserved)",
- "(reserved)",
- "Miscompare",
- "(reserved)",
-};
-
-/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned long asc_ascq;
- const char * const text;
-} sense_data_texts[] = {
- { 0x000000, "No additional sense information" },
- { 0x000011, "Play operation in progress" },
- { 0x000012, "Play operation paused" },
- { 0x000013, "Play operation successfully completed" },
- { 0x000014, "Play operation stopped due to error" },
- { 0x000015, "No current audio status to return" },
- { 0x010c0a, "Write error - padding blocks added" },
- { 0x011700, "Recovered data with no error correction applied" },
- { 0x011701, "Recovered data with retries" },
- { 0x011702, "Recovered data with positive head offset" },
- { 0x011703, "Recovered data with negative head offset" },
- { 0x011704, "Recovered data with retries and/or CIRC applied" },
- { 0x011705, "Recovered data using previous sector ID" },
- { 0x011800, "Recovered data with error correction applied" },
- { 0x011801, "Recovered data with error correction and retries applied"},
- { 0x011802, "Recovered data - the data was auto-reallocated" },
- { 0x011803, "Recovered data with CIRC" },
- { 0x011804, "Recovered data with L-EC" },
- { 0x015d00,
- "Failure prediction threshold exceeded - Predicted logical unit failure" },
- { 0x015d01,
- "Failure prediction threshold exceeded - Predicted media failure" },
- { 0x015dff, "Failure prediction threshold exceeded - False" },
- { 0x017301, "Power calibration area almost full" },
- { 0x020400, "Logical unit not ready - cause not reportable" },
- /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
- { 0x020401,
- "Logical unit not ready - in progress [sic] of becoming ready" },
- { 0x020402, "Logical unit not ready - initializing command required" },
- { 0x020403, "Logical unit not ready - manual intervention required" },
- { 0x020404, "Logical unit not ready - format in progress" },
- { 0x020407, "Logical unit not ready - operation in progress" },
- { 0x020408, "Logical unit not ready - long write in progress" },
- { 0x020600, "No reference position found (media may be upside down)" },
- { 0x023000, "Incompatible medium installed" },
- { 0x023a00, "Medium not present" },
- { 0x025300, "Media load or eject failed" },
- { 0x025700, "Unable to recover table of contents" },
- { 0x030300, "Peripheral device write fault" },
- { 0x030301, "No write current" },
- { 0x030302, "Excessive write errors" },
- { 0x030c00, "Write error" },
- { 0x030c01, "Write error - Recovered with auto reallocation" },
- { 0x030c02, "Write error - auto reallocation failed" },
- { 0x030c03, "Write error - recommend reassignment" },
- { 0x030c04, "Compression check miscompare error" },
- { 0x030c05, "Data expansion occurred during compress" },
- { 0x030c06, "Block not compressible" },
- { 0x030c07, "Write error - recovery needed" },
- { 0x030c08, "Write error - recovery failed" },
- { 0x030c09, "Write error - loss of streaming" },
- { 0x031100, "Unrecovered read error" },
- { 0x031106, "CIRC unrecovered error" },
- { 0x033101, "Format command failed" },
- { 0x033200, "No defect spare location available" },
- { 0x033201, "Defect list update failure" },
- { 0x035100, "Erase failure" },
- { 0x037200, "Session fixation error" },
- { 0x037201, "Session fixation error writin lead-in" },
- { 0x037202, "Session fixation error writin lead-out" },
- { 0x037300, "CD control error" },
- { 0x037302, "Power calibration area is full" },
- { 0x037303, "Power calibration area error" },
- { 0x037304, "Program memory area / RMA update failure" },
- { 0x037305, "Program memory area / RMA is full" },
- { 0x037306, "Program memory area / RMA is (almost) full" },
-
- { 0x040200, "No seek complete" },
- { 0x040300, "Write fault" },
- { 0x040900, "Track following error" },
- { 0x040901, "Tracking servo failure" },
- { 0x040902, "Focus servo failure" },
- { 0x040903, "Spindle servo failure" },
- { 0x041500, "Random positioning error" },
- { 0x041501, "Mechanical positioning or changer error" },
- { 0x041502, "Positioning error detected by read of medium" },
- { 0x043c00, "Mechanical positioning or changer error" },
- { 0x044000, "Diagnostic failure on component (ASCQ)" },
- { 0x044400, "Internal CD/DVD logical unit failure" },
- { 0x04b600, "Media load mechanism failed" },
- { 0x051a00, "Parameter list length error" },
- { 0x052000, "Invalid command operation code" },
- { 0x052100, "Logical block address out of range" },
- { 0x052102, "Invalid address for write" },
- { 0x052400, "Invalid field in command packet" },
- { 0x052600, "Invalid field in parameter list" },
- { 0x052601, "Parameter not supported" },
- { 0x052602, "Parameter value invalid" },
- { 0x052700, "Write protected media" },
- { 0x052c00, "Command sequence error" },
- { 0x052c03, "Current program area is not empty" },
- { 0x052c04, "Current program area is empty" },
- { 0x053001, "Cannot read medium - unknown format" },
- { 0x053002, "Cannot read medium - incompatible format" },
- { 0x053900, "Saving parameters not supported" },
- { 0x054e00, "Overlapped commands attempted" },
- { 0x055302, "Medium removal prevented" },
- { 0x055500, "System resource failure" },
- { 0x056300, "End of user area encountered on this track" },
- { 0x056400, "Illegal mode for this track or incompatible medium" },
- { 0x056f00, "Copy protection key exchange failure - Authentication failure" },
- { 0x056f01, "Copy protection key exchange failure - Key not present" },
- { 0x056f02, "Copy protection key exchange failure - Key not established" },
- { 0x056f03, "Read of scrambled sector without authentication" },
- { 0x056f04, "Media region code is mismatched to logical unit" },
- { 0x056f05, "Drive region must be permanent / region reset count error" },
- { 0x057203, "Session fixation error - incomplete track in session" },
- { 0x057204, "Empty or partially written reserved track" },
- { 0x057205, "No more RZONE reservations are allowed" },
- { 0x05bf00, "Loss of streaming" },
- { 0x062800, "Not ready to ready transition, medium may have changed" },
- { 0x062900, "Power on, reset or hardware reset occurred" },
- { 0x062a00, "Parameters changed" },
- { 0x062a01, "Mode parameters changed" },
- { 0x062e00, "Insufficient time for operation" },
- { 0x063f00, "Logical unit operating conditions have changed" },
- { 0x063f01, "Microcode has been changed" },
- { 0x065a00, "Operator request or state change input (unspecified)" },
- { 0x065a01, "Operator medium removal request" },
- { 0x0bb900, "Play operation aborted" },
-
- /* Here we use 0xff for the key (not a valid key) to signify
- * that these can have _any_ key value associated with them... */
- { 0xff0401, "Logical unit is in process of becoming ready" },
- { 0xff0400, "Logical unit not ready, cause not reportable" },
- { 0xff0402, "Logical unit not ready, initializing command required" },
- { 0xff0403, "Logical unit not ready, manual intervention required" },
- { 0xff0500, "Logical unit does not respond to selection" },
- { 0xff0800, "Logical unit communication failure" },
- { 0xff0802, "Logical unit communication parity error" },
- { 0xff0801, "Logical unit communication time-out" },
- { 0xff2500, "Logical unit not supported" },
- { 0xff4c00, "Logical unit failed self-configuration" },
- { 0xff3e00, "Logical unit has not self-configured yet" },
-};
-#endif
-
+/* ide-cd_verbose.c */
+void ide_cd_log_error(const char *, struct request *, struct request_sense *);
+
+/* ide-cd.c functions used by ide-cd_ioctl.c */
+void ide_cd_init_rq(ide_drive_t *, struct request *);
+int ide_cd_queue_pc(ide_drive_t *, struct request *);
+int ide_cd_read_toc(ide_drive_t *, struct request_sense *);
+int ide_cdrom_get_capabilities(ide_drive_t *, u8 *);
+void ide_cdrom_update_speed(ide_drive_t *, u8 *);
+int cdrom_check_status(ide_drive_t *, struct request_sense *);
+
+/* ide-cd_ioctl.c */
+int ide_cdrom_open_real(struct cdrom_device_info *, int);
+void ide_cdrom_release_real(struct cdrom_device_info *);
+int ide_cdrom_drive_status(struct cdrom_device_info *, int);
+int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int);
+int ide_cdrom_tray_move(struct cdrom_device_info *, int);
+int ide_cdrom_lock_door(struct cdrom_device_info *, int);
+int ide_cdrom_select_speed(struct cdrom_device_info *, int);
+int ide_cdrom_get_last_session(struct cdrom_device_info *,
+ struct cdrom_multisession *);
+int ide_cdrom_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *);
+int ide_cdrom_reset(struct cdrom_device_info *cdi);
+int ide_cdrom_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
+int ide_cdrom_packet(struct cdrom_device_info *, struct packet_command *);
#endif /* _IDE_CD_H */
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
new file mode 100644
index 0000000..b68284d
--- /dev/null
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -0,0 +1,475 @@
+/*
+ * cdrom.c IOCTLs handling for ide-cd driver.
+ *
+ * Copyright (C) 1994-1996 Scott Snyder <snyder@xxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1998 Erik Andersen <andersee@xxxxxxxxxx>
+ * Copyright (C) 1998-2000 Jens Axboe <axboe@xxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/cdrom.h>
+#include <linux/ide.h>
+#include <scsi/scsi.h>
+
+#include "ide-cd.h"
+
+/****************************************************************************
+ * Other driver requests (open, close, check media change).
+ */
+int ide_cdrom_open_real(struct cdrom_device_info *cdi, int purpose)
+{
+ return 0;
+}
+
+/*
+ * Close down the device. Invalidate all cached blocks.
+ */
+void ide_cdrom_release_real(struct cdrom_device_info *cdi)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct cdrom_info *cd = drive->driver_data;
+
+ if (!cdi->use_count)
+ cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID;
+}
+
+/*
+ * add logic to try GET_EVENT command first to check for media and tray
+ * status. this should be supported by newer cd-r/w and all DVD etc
+ * drives
+ */
+int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct media_event_desc med;
+ struct request_sense sense;
+ int stat;
+
+ if (slot_nr != CDSL_CURRENT)
+ return -EINVAL;
+
+ stat = cdrom_check_status(drive, &sense);
+ if (!stat || sense.sense_key == UNIT_ATTENTION)
+ return CDS_DISC_OK;
+
+ if (!cdrom_get_media_event(cdi, &med)) {
+ if (med.media_present)
+ return CDS_DISC_OK;
+ else if (med.door_open)
+ return CDS_TRAY_OPEN;
+ else
+ return CDS_NO_DISC;
+ }
+
+ if (sense.sense_key == NOT_READY && sense.asc == 0x04
+ && sense.ascq == 0x04)
+ return CDS_DISC_OK;
+
+ /*
+ * If not using Mt Fuji extended media tray reports,
+ * just return TRAY_OPEN since ATAPI doesn't provide
+ * any other way to detect this...
+ */
+ if (sense.sense_key == NOT_READY) {
+ if (sense.asc == 0x3a && sense.ascq == 1)
+ return CDS_NO_DISC;
+ else
+ return CDS_TRAY_OPEN;
+ }
+ return CDS_DRIVE_NOT_READY;
+}
+
+int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi,
+ int slot_nr)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct cdrom_info *cd = drive->driver_data;
+ int retval;
+
+ if (slot_nr == CDSL_CURRENT) {
+ (void) cdrom_check_status(drive, NULL);
+ retval = (cd->cd_flags & IDE_CD_FLAG_MEDIA_CHANGED) ? 1 : 0;
+ cd->cd_flags &= ~IDE_CD_FLAG_MEDIA_CHANGED;
+ return retval;
+ } else {
+ return -EINVAL;
+ }
+}
+
+/* Eject the disk if EJECTFLAG is 0.
+ If EJECTFLAG is 1, try to reload the disk. */
+static
+int cdrom_eject(ide_drive_t *drive, int ejectflag,
+ struct request_sense *sense)
+{
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_device_info *cdi = &cd->devinfo;
+ struct request req;
+ char loej = 0x02;
+
+ if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag)
+ return -EDRIVE_CANT_DO_THIS;
+
+ /* reload fails on some drives, if the tray is locked */
+ if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag)
+ return 0;
+
+ ide_cd_init_rq(drive, &req);
+
+ /* only tell drive to close tray if open, if it can do that */
+ if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY))
+ loej = 0;
+
+ req.sense = sense;
+ req.cmd[0] = GPCMD_START_STOP_UNIT;
+ req.cmd[4] = loej | (ejectflag != 0);
+
+ return ide_cd_queue_pc(drive, &req);
+}
+
+/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
+static
+int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
+ struct request_sense *sense)
+{
+ struct cdrom_info *cd = drive->driver_data;
+ struct request_sense my_sense;
+ struct request req;
+ int stat;
+
+ if (sense == NULL)
+ sense = &my_sense;
+
+ /* If the drive cannot lock the door, just pretend. */
+ if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) {
+ stat = 0;
+ } else {
+ ide_cd_init_rq(drive, &req);
+ req.sense = sense;
+ req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
+ req.cmd[4] = lockflag ? 1 : 0;
+ stat = ide_cd_queue_pc(drive, &req);
+ }
+
+ /* If we got an illegal field error, the drive
+ probably cannot lock the door. */
+ if (stat != 0 &&
+ sense->sense_key == ILLEGAL_REQUEST &&
+ (sense->asc == 0x24 || sense->asc == 0x20)) {
+ printk(KERN_ERR "%s: door locking not supported\n",
+ drive->name);
+ cd->cd_flags |= IDE_CD_FLAG_NO_DOORLOCK;
+ stat = 0;
+ }
+
+ /* no medium, that's alright. */
+ if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
+ stat = 0;
+
+ if (stat == 0) {
+ if (lockflag)
+ cd->cd_flags |= IDE_CD_FLAG_DOOR_LOCKED;
+ else
+ cd->cd_flags &= ~IDE_CD_FLAG_DOOR_LOCKED;
+ }
+
+ return stat;
+}
+
+int ide_cdrom_tray_move(struct cdrom_device_info *cdi, int position)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct request_sense sense;
+
+ if (position) {
+ int stat = ide_cd_lockdoor(drive, 0, &sense);
+
+ if (stat)
+ return stat;
+ }
+
+ return cdrom_eject(drive, !position, &sense);
+}
+
+int ide_cdrom_lock_door(struct cdrom_device_info *cdi, int lock)
+{
+ ide_drive_t *drive = cdi->handle;
+
+ return ide_cd_lockdoor(drive, lock, NULL);
+}
+
+/*
+ * ATAPI devices are free to select the speed you request or any slower
+ * rate. :-( Requesting too fast a speed will _not_ produce an error.
+ */
+int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct cdrom_info *cd = drive->driver_data;
+ struct request rq;
+ struct request_sense sense;
+ u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
+ int stat;
+
+ ide_cd_init_rq(drive, &rq);
+
+ rq.sense = &sense;
+
+ if (speed == 0)
+ speed = 0xffff; /* set to max */
+ else
+ speed *= 177; /* Nx to kbytes/s */
+
+ rq.cmd[0] = GPCMD_SET_SPEED;
+ /* Read Drive speed in kbytes/second MSB/LSB */
+ rq.cmd[2] = (speed >> 8) & 0xff;
+ rq.cmd[3] = speed & 0xff;
+ if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) !=
+ (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) {
+ /* Write Drive speed in kbytes/second MSB/LSB */
+ rq.cmd[4] = (speed >> 8) & 0xff;
+ rq.cmd[5] = speed & 0xff;
+ }
+
+ stat = ide_cd_queue_pc(drive, &rq);
+
+ if (!ide_cdrom_get_capabilities(drive, buf)) {
+ ide_cdrom_update_speed(drive, buf);
+ cdi->speed = cd->current_speed;
+ }
+
+ return 0;
+}
+
+int ide_cdrom_get_last_session(struct cdrom_device_info *cdi,
+ struct cdrom_multisession *ms_info)
+{
+ struct atapi_toc *toc;
+ ide_drive_t *drive = cdi->handle;
+ struct cdrom_info *info = drive->driver_data;
+ struct request_sense sense;
+ int ret;
+
+ if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0 || !info->toc) {
+ ret = ide_cd_read_toc(drive, &sense);
+ if (ret)
+ return ret;
+ }
+
+ toc = info->toc;
+ ms_info->addr.lba = toc->last_session_lba;
+ ms_info->xa_flag = toc->xa_flag;
+
+ return 0;
+}
+
+int ide_cdrom_get_mcn(struct cdrom_device_info *cdi,
+ struct cdrom_mcn *mcn_info)
+{
+ ide_drive_t *drive = cdi->handle;
+ int stat, mcnlen;
+ struct request rq;
+ char buf[24];
+
+ ide_cd_init_rq(drive, &rq);
+
+ rq.data = buf;
+ rq.data_len = sizeof(buf);
+
+ rq.cmd[0] = GPCMD_READ_SUBCHANNEL;
+ rq.cmd[1] = 2; /* MSF addressing */
+ rq.cmd[2] = 0x40; /* request subQ data */
+ rq.cmd[3] = 2; /* format */
+ rq.cmd[8] = sizeof(buf);
+
+ stat = ide_cd_queue_pc(drive, &rq);
+ if (stat)
+ return stat;
+
+ mcnlen = sizeof(mcn_info->medium_catalog_number) - 1;
+ memcpy(mcn_info->medium_catalog_number, buf + 9, mcnlen);
+ mcn_info->medium_catalog_number[mcnlen] = '\0';
+
+ return 0;
+}
+
+int ide_cdrom_reset(struct cdrom_device_info *cdi)
+{
+ ide_drive_t *drive = cdi->handle;
+ struct cdrom_info *cd = drive->driver_data;
+ struct request_sense sense;
+ struct request req;
+ int ret;
+
+ ide_cd_init_rq(drive, &req);
+ req.cmd_type = REQ_TYPE_SPECIAL;
+ req.cmd_flags = REQ_QUIET;
+ ret = ide_do_drive_cmd(drive, &req, ide_wait);
+
+ /*
+ * A reset will unlock the door. If it was previously locked,
+ * lock it again.
+ */
+ if (cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED)
+ (void)ide_cd_lockdoor(drive, 1, &sense);
+
+ return ret;
+}
+
+static int ide_cd_get_toc_entry(ide_drive_t *drive, int track,
+ struct atapi_toc_entry **ent)
+{
+ struct cdrom_info *info = drive->driver_data;
+ struct atapi_toc *toc = info->toc;
+ int ntracks;
+
+ /*
+ * don't serve cached data, if the toc isn't valid
+ */
+ if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0)
+ return -EINVAL;
+
+ /* Check validity of requested track number. */
+ ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
+
+ if (toc->hdr.first_track == CDROM_LEADOUT)
+ ntracks = 0;
+
+ if (track == CDROM_LEADOUT)
+ *ent = &toc->ent[ntracks];
+ else if (track < toc->hdr.first_track || track > toc->hdr.last_track)
+ return -EINVAL;
+ else
+ *ent = &toc->ent[track - toc->hdr.first_track];
+
+ return 0;
+}
+
+static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
+{
+ struct cdrom_ti *ti = arg;
+ struct atapi_toc_entry *first_toc, *last_toc;
+ unsigned long lba_start, lba_end;
+ int stat;
+ struct request rq;
+ struct request_sense sense;
+
+ stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
+ if (stat)
+ return stat;
+
+ stat = ide_cd_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
+ if (stat)
+ return stat;
+
+ if (ti->cdti_trk1 != CDROM_LEADOUT)
+ ++last_toc;
+ lba_start = first_toc->addr.lba;
+ lba_end = last_toc->addr.lba;
+
+ if (lba_end <= lba_start)
+ return -EINVAL;
+
+ ide_cd_init_rq(drive, &rq);
+
+ rq.sense = &sense;
+ rq.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
+ lba_to_msf(lba_start, &rq.cmd[3], &rq.cmd[4], &rq.cmd[5]);
+ lba_to_msf(lba_end - 1, &rq.cmd[6], &rq.cmd[7], &rq.cmd[8]);
+
+ return ide_cd_queue_pc(drive, &rq);
+}
+
+static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg)
+{
+ struct cdrom_info *cd = drive->driver_data;
+ struct cdrom_tochdr *tochdr = arg;
+ struct atapi_toc *toc;
+ int stat;
+
+ /* Make sure our saved TOC is valid. */
+ stat = ide_cd_read_toc(drive, NULL);
+ if (stat)
+ return stat;
+
+ toc = cd->toc;
+ tochdr->cdth_trk0 = toc->hdr.first_track;
+ tochdr->cdth_trk1 = toc->hdr.last_track;
+
+ return 0;
+}
+
+static int ide_cd_read_tocentry(ide_drive_t *drive, void *arg)
+{
+ struct cdrom_tocentry *tocentry = arg;
+ struct atapi_toc_entry *toce;
+ int stat;
+
+ stat = ide_cd_get_toc_entry(drive, tocentry->cdte_track, &toce);
+ if (stat)
+ return stat;
+
+ tocentry->cdte_ctrl = toce->control;
+ tocentry->cdte_adr = toce->adr;
+ if (tocentry->cdte_format == CDROM_MSF) {
+ lba_to_msf(toce->addr.lba,
+ &tocentry->cdte_addr.msf.minute,
+ &tocentry->cdte_addr.msf.second,
+ &tocentry->cdte_addr.msf.frame);
+ } else
+ tocentry->cdte_addr.lba = toce->addr.lba;
+
+ return 0;
+}
+
+int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi,
+ unsigned int cmd, void *arg)
+{
+ ide_drive_t *drive = cdi->handle;
+
+ switch (cmd) {
+ /*
+ * emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
+ * atapi doesn't support it
+ */
+ case CDROMPLAYTRKIND:
+ return ide_cd_fake_play_trkind(drive, arg);
+ case CDROMREADTOCHDR:
+ return ide_cd_read_tochdr(drive, arg);
+ case CDROMREADTOCENTRY:
+ return ide_cd_read_tocentry(drive, arg);
+ default:
+ return -EINVAL;
+ }
+}
+
+/* the generic packet interface to cdrom.c */
+int ide_cdrom_packet(struct cdrom_device_info *cdi,
+ struct packet_command *cgc)
+{
+ struct request req;
+ ide_drive_t *drive = cdi->handle;
+
+ if (cgc->timeout <= 0)
+ cgc->timeout = ATAPI_WAIT_PC;
+
+ /* here we queue the commands from the uniform CD-ROM
+ layer. the packet must be complete, as we do not
+ touch it at all. */
+ ide_cd_init_rq(drive, &req);
+ memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
+ if (cgc->sense)
+ memset(cgc->sense, 0, sizeof(struct request_sense));
+ req.data = cgc->buffer;
+ req.data_len = cgc->buflen;
+ req.timeout = cgc->timeout;
+
+ if (cgc->quiet)
+ req.cmd_flags |= REQ_QUIET;
+
+ req.sense = cgc->sense;
+ cgc->stat = ide_cd_queue_pc(drive, &req);
+ if (!cgc->stat)
+ cgc->buflen -= req.data_len;
+ return cgc->stat;
+}
diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c
new file mode 100644
index 0000000..6ed7ca0
--- /dev/null
+++ b/drivers/ide/ide-cd_verbose.c
@@ -0,0 +1,359 @@
+/*
+ * Verbose error logging for ATAPI CD/DVD devices.
+ *
+ * Copyright (C) 1994-1996 Scott Snyder <snyder@xxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1998 Erik Andersen <andersee@xxxxxxxxxx>
+ * Copyright (C) 1998-2000 Jens Axboe <axboe@xxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/cdrom.h>
+#include <scsi/scsi.h>
+
+#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
+void ide_cd_log_error(const char *name, struct request *failed_command,
+ struct request_sense *sense)
+{
+ /* Suppress printing unit attention and `in progress of becoming ready'
+ errors when we're not being verbose. */
+ if (sense->sense_key == UNIT_ATTENTION ||
+ (sense->sense_key == NOT_READY && (sense->asc == 4 ||
+ sense->asc == 0x3a)))
+ return;
+
+ printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
+ "asc: 0x%02x ascq: 0x%02x\n",
+ name, sense->error_code, sense->sense_key,
+ sense->asc, sense->ascq);
+}
+#else
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned short packet_command;
+ const char * const text;
+} packet_command_texts[] = {
+ { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
+ { GPCMD_REQUEST_SENSE, "Request Sense" },
+ { GPCMD_FORMAT_UNIT, "Format Unit" },
+ { GPCMD_INQUIRY, "Inquiry" },
+ { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
+ { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
+ { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
+ { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
+ { GPCMD_READ_10, "Read 10" },
+ { GPCMD_WRITE_10, "Write 10" },
+ { GPCMD_SEEK, "Seek" },
+ { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
+ { GPCMD_VERIFY_10, "Verify 10" },
+ { GPCMD_FLUSH_CACHE, "Flush Cache" },
+ { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
+ { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
+ { GPCMD_READ_HEADER, "Read Header" },
+ { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
+ { GPCMD_GET_CONFIGURATION, "Get Configuration" },
+ { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
+ { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
+ { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
+ "Get Event Status Notification" },
+ { GPCMD_PAUSE_RESUME, "Pause/Resume" },
+ { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
+ { GPCMD_READ_DISC_INFO, "Read Disc Info" },
+ { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
+ { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
+ { GPCMD_SEND_OPC, "Send OPC" },
+ { GPCMD_MODE_SELECT_10, "Mode Select 10" },
+ { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
+ { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
+ { GPCMD_CLOSE_TRACK, "Close Track" },
+ { GPCMD_BLANK, "Blank" },
+ { GPCMD_SEND_EVENT, "Send Event" },
+ { GPCMD_SEND_KEY, "Send Key" },
+ { GPCMD_REPORT_KEY, "Report Key" },
+ { GPCMD_LOAD_UNLOAD, "Load/Unload" },
+ { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
+ { GPCMD_READ_12, "Read 12" },
+ { GPCMD_GET_PERFORMANCE, "Get Performance" },
+ { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
+ { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
+ { GPCMD_SET_STREAMING, "Set Streaming" },
+ { GPCMD_READ_CD_MSF, "Read CD MSF" },
+ { GPCMD_SCAN, "Scan" },
+ { GPCMD_SET_SPEED, "Set Speed" },
+ { GPCMD_PLAY_CD, "Play CD" },
+ { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
+ { GPCMD_READ_CD, "Read CD" },
+};
+
+/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const char * const sense_key_texts[16] = {
+ "No sense data",
+ "Recovered error",
+ "Not ready",
+ "Medium error",
+ "Hardware error",
+ "Illegal request",
+ "Unit attention",
+ "Data protect",
+ "Blank check",
+ "(reserved)",
+ "(reserved)",
+ "Aborted command",
+ "(reserved)",
+ "(reserved)",
+ "Miscompare",
+ "(reserved)",
+};
+
+/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned long asc_ascq;
+ const char * const text;
+} sense_data_texts[] = {
+ { 0x000000, "No additional sense information" },
+ { 0x000011, "Play operation in progress" },
+ { 0x000012, "Play operation paused" },
+ { 0x000013, "Play operation successfully completed" },
+ { 0x000014, "Play operation stopped due to error" },
+ { 0x000015, "No current audio status to return" },
+ { 0x010c0a, "Write error - padding blocks added" },
+ { 0x011700, "Recovered data with no error correction applied" },
+ { 0x011701, "Recovered data with retries" },
+ { 0x011702, "Recovered data with positive head offset" },
+ { 0x011703, "Recovered data with negative head offset" },
+ { 0x011704, "Recovered data with retries and/or CIRC applied" },
+ { 0x011705, "Recovered data using previous sector ID" },
+ { 0x011800, "Recovered data with error correction applied" },
+ { 0x011801, "Recovered data with error correction and retries applied"},
+ { 0x011802, "Recovered data - the data was auto-reallocated" },
+ { 0x011803, "Recovered data with CIRC" },
+ { 0x011804, "Recovered data with L-EC" },
+ { 0x015d00, "Failure prediction threshold exceeded"
+ " - Predicted logical unit failure" },
+ { 0x015d01, "Failure prediction threshold exceeded"
+ " - Predicted media failure" },
+ { 0x015dff, "Failure prediction threshold exceeded - False" },
+ { 0x017301, "Power calibration area almost full" },
+ { 0x020400, "Logical unit not ready - cause not reportable" },
+ /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
+ { 0x020401, "Logical unit not ready"
+ " - in progress [sic] of becoming ready" },
+ { 0x020402, "Logical unit not ready - initializing command required" },
+ { 0x020403, "Logical unit not ready - manual intervention required" },
+ { 0x020404, "Logical unit not ready - format in progress" },
+ { 0x020407, "Logical unit not ready - operation in progress" },
+ { 0x020408, "Logical unit not ready - long write in progress" },
+ { 0x020600, "No reference position found (media may be upside down)" },
+ { 0x023000, "Incompatible medium installed" },
+ { 0x023a00, "Medium not present" },
+ { 0x025300, "Media load or eject failed" },
+ { 0x025700, "Unable to recover table of contents" },
+ { 0x030300, "Peripheral device write fault" },
+ { 0x030301, "No write current" },
+ { 0x030302, "Excessive write errors" },
+ { 0x030c00, "Write error" },
+ { 0x030c01, "Write error - Recovered with auto reallocation" },
+ { 0x030c02, "Write error - auto reallocation failed" },
+ { 0x030c03, "Write error - recommend reassignment" },
+ { 0x030c04, "Compression check miscompare error" },
+ { 0x030c05, "Data expansion occurred during compress" },
+ { 0x030c06, "Block not compressible" },
+ { 0x030c07, "Write error - recovery needed" },
+ { 0x030c08, "Write error - recovery failed" },
+ { 0x030c09, "Write error - loss of streaming" },
+ { 0x031100, "Unrecovered read error" },
+ { 0x031106, "CIRC unrecovered error" },
+ { 0x033101, "Format command failed" },
+ { 0x033200, "No defect spare location available" },
+ { 0x033201, "Defect list update failure" },
+ { 0x035100, "Erase failure" },
+ { 0x037200, "Session fixation error" },
+ { 0x037201, "Session fixation error writin lead-in" },
+ { 0x037202, "Session fixation error writin lead-out" },
+ { 0x037300, "CD control error" },
+ { 0x037302, "Power calibration area is full" },
+ { 0x037303, "Power calibration area error" },
+ { 0x037304, "Program memory area / RMA update failure" },
+ { 0x037305, "Program memory area / RMA is full" },
+ { 0x037306, "Program memory area / RMA is (almost) full" },
+ { 0x040200, "No seek complete" },
+ { 0x040300, "Write fault" },
+ { 0x040900, "Track following error" },
+ { 0x040901, "Tracking servo failure" },
+ { 0x040902, "Focus servo failure" },
+ { 0x040903, "Spindle servo failure" },
+ { 0x041500, "Random positioning error" },
+ { 0x041501, "Mechanical positioning or changer error" },
+ { 0x041502, "Positioning error detected by read of medium" },
+ { 0x043c00, "Mechanical positioning or changer error" },
+ { 0x044000, "Diagnostic failure on component (ASCQ)" },
+ { 0x044400, "Internal CD/DVD logical unit failure" },
+ { 0x04b600, "Media load mechanism failed" },
+ { 0x051a00, "Parameter list length error" },
+ { 0x052000, "Invalid command operation code" },
+ { 0x052100, "Logical block address out of range" },
+ { 0x052102, "Invalid address for write" },
+ { 0x052400, "Invalid field in command packet" },
+ { 0x052600, "Invalid field in parameter list" },
+ { 0x052601, "Parameter not supported" },
+ { 0x052602, "Parameter value invalid" },
+ { 0x052700, "Write protected media" },
+ { 0x052c00, "Command sequence error" },
+ { 0x052c03, "Current program area is not empty" },
+ { 0x052c04, "Current program area is empty" },
+ { 0x053001, "Cannot read medium - unknown format" },
+ { 0x053002, "Cannot read medium - incompatible format" },
+ { 0x053900, "Saving parameters not supported" },
+ { 0x054e00, "Overlapped commands attempted" },
+ { 0x055302, "Medium removal prevented" },
+ { 0x055500, "System resource failure" },
+ { 0x056300, "End of user area encountered on this track" },
+ { 0x056400, "Illegal mode for this track or incompatible medium" },
+ { 0x056f00, "Copy protection key exchange failure"
+ " - Authentication failure" },
+ { 0x056f01, "Copy protection key exchange failure - Key not present" },
+ { 0x056f02, "Copy protection key exchange failure"
+ " - Key not established" },
+ { 0x056f03, "Read of scrambled sector without authentication" },
+ { 0x056f04, "Media region code is mismatched to logical unit" },
+ { 0x056f05, "Drive region must be permanent"
+ " / region reset count error" },
+ { 0x057203, "Session fixation error - incomplete track in session" },
+ { 0x057204, "Empty or partially written reserved track" },
+ { 0x057205, "No more RZONE reservations are allowed" },
+ { 0x05bf00, "Loss of streaming" },
+ { 0x062800, "Not ready to ready transition, medium may have changed" },
+ { 0x062900, "Power on, reset or hardware reset occurred" },
+ { 0x062a00, "Parameters changed" },
+ { 0x062a01, "Mode parameters changed" },
+ { 0x062e00, "Insufficient time for operation" },
+ { 0x063f00, "Logical unit operating conditions have changed" },
+ { 0x063f01, "Microcode has been changed" },
+ { 0x065a00, "Operator request or state change input (unspecified)" },
+ { 0x065a01, "Operator medium removal request" },
+ { 0x0bb900, "Play operation aborted" },
+ /* Here we use 0xff for the key (not a valid key) to signify
+ * that these can have _any_ key value associated with them... */
+ { 0xff0401, "Logical unit is in process of becoming ready" },
+ { 0xff0400, "Logical unit not ready, cause not reportable" },
+ { 0xff0402, "Logical unit not ready, initializing command required" },
+ { 0xff0403, "Logical unit not ready, manual intervention required" },
+ { 0xff0500, "Logical unit does not respond to selection" },
+ { 0xff0800, "Logical unit communication failure" },
+ { 0xff0802, "Logical unit communication parity error" },
+ { 0xff0801, "Logical unit communication time-out" },
+ { 0xff2500, "Logical unit not supported" },
+ { 0xff4c00, "Logical unit failed self-configuration" },
+ { 0xff3e00, "Logical unit has not self-configured yet" },
+};
+
+void ide_cd_log_error(const char *name, struct request *failed_command,
+ struct request_sense *sense)
+{
+ int i;
+ const char *s = "bad sense key!";
+ char buf[80];
+
+ printk(KERN_ERR "ATAPI device %s:\n", name);
+ if (sense->error_code == 0x70)
+ printk(KERN_CONT " Error: ");
+ else if (sense->error_code == 0x71)
+ printk(" Deferred Error: ");
+ else if (sense->error_code == 0x7f)
+ printk(KERN_CONT " Vendor-specific Error: ");
+ else
+ printk(KERN_CONT " Unknown Error Type: ");
+
+ if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
+ s = sense_key_texts[sense->sense_key];
+
+ printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
+
+ if (sense->asc == 0x40) {
+ sprintf(buf, "Diagnostic failure on component 0x%02x",
+ sense->ascq);
+ s = buf;
+ } else {
+ int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
+ unsigned long key = (sense->sense_key << 16);
+
+ key |= (sense->asc << 8);
+ if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
+ key |= sense->ascq;
+ s = NULL;
+
+ while (hi > lo) {
+ mid = (lo + hi) / 2;
+ if (sense_data_texts[mid].asc_ascq == key ||
+ sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
+ s = sense_data_texts[mid].text;
+ break;
+ } else if (sense_data_texts[mid].asc_ascq > key)
+ hi = mid;
+ else
+ lo = mid + 1;
+ }
+ }
+
+ if (s == NULL) {
+ if (sense->asc > 0x80)
+ s = "(vendor-specific error)";
+ else
+ s = "(reserved error code)";
+ }
+
+ printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
+ s, sense->asc, sense->ascq);
+
+ if (failed_command != NULL) {
+ int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
+ s = NULL;
+
+ while (hi > lo) {
+ mid = (lo + hi) / 2;
+ if (packet_command_texts[mid].packet_command ==
+ failed_command->cmd[0]) {
+ s = packet_command_texts[mid].text;
+ break;
+ }
+ if (packet_command_texts[mid].packet_command >
+ failed_command->cmd[0])
+ hi = mid;
+ else
+ lo = mid + 1;
+ }
+
+ printk(KERN_ERR " The failed \"%s\" packet command "
+ "was: \n \"", s);
+ for (i = 0; i < sizeof(failed_command->cmd); i++)
+ printk(KERN_CONT "%02x ", failed_command->cmd[i]);
+ printk(KERN_CONT "\"\n");
+ }
+
+ /* The SKSV bit specifies validity of the sense_key_specific
+ * in the next two commands. It is bit 7 of the first byte.
+ * In the case of NOT_READY, if SKSV is set the drive can
+ * give us nice ETA readings.
+ */
+ if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
+ int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
+
+ printk(KERN_ERR " Command is %02d%% complete\n",
+ progress / 0xffff);
+ }
+
+ if (sense->sense_key == ILLEGAL_REQUEST &&
+ (sense->sks[0] & 0x80) != 0) {
+ printk(KERN_ERR " Error in %s byte %d",
+ (sense->sks[0] & 0x40) != 0 ?
+ "command packet" : "command data",
+ (sense->sks[1] << 8) + sense->sks[2]);
+
+ if ((sense->sks[0] & 0x40) != 0)
+ printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
+
+ printk(KERN_CONT "\n");
+ }
+}
+#endif
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 717e114..3c69822 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -1,10 +1,9 @@
/*
- * linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003
- *
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
- * Copyright (C) 1998-2002 Linux ATA Development
- * Andre Hedrick <andre@xxxxxxxxxxxxx>
- * Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
+ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyright (C) 1998-2002 Linux ATA Development
+ * Andre Hedrick <andre@xxxxxxxxxxxxx>
+ * Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
+ * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 5bf3203..7beaf1e 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1,15 +1,13 @@
/*
- * linux/drivers/ide/ide-dma.c Version 4.10 June 9, 2000
+ * Copyright (C) 1995-1998 Mark Lord
+ * Copyright (C) 1999-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
+ * Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz
*
- * Copyright (c) 1999-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
* May be copied or modified under the terms of the GNU General Public License
*/
/*
* Special Thanks to Mark for his Six years of work.
- *
- * Copyright (c) 1995-1998 Mark Lord
- * May be copied or modified under the terms of the GNU General Public License
*/
/*
@@ -85,6 +83,7 @@
#include <linux/ide.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -169,16 +168,15 @@ static int ide_dma_good_drive(ide_drive_t *drive)
return ide_in_drive_list(drive->id, drive_whitelist);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_sglist - map IDE scatter gather for DMA I/O
* @drive: the drive to build the DMA table for
* @rq: the request holding the sg list
*
- * Perform the PCI mapping magic necessary to access the source or
- * target buffers of a request via PCI DMA. The lower layers of the
+ * Perform the DMA mapping magic necessary to access the source or
+ * target buffers of a request via DMA. The lower layers of the
* kernel provide the necessary cache management so that we can
- * operate in a portable fashion
+ * operate in a portable fashion.
*/
int ide_build_sglist(ide_drive_t *drive, struct request *rq)
@@ -186,20 +184,20 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
ide_hwif_t *hwif = HWIF(drive);
struct scatterlist *sg = hwif->sg_table;
- BUG_ON((rq->cmd_type == REQ_TYPE_ATA_TASKFILE) && rq->nr_sectors > 256);
-
ide_map_sg(drive, rq);
if (rq_data_dir(rq) == READ)
- hwif->sg_dma_direction = PCI_DMA_FROMDEVICE;
+ hwif->sg_dma_direction = DMA_FROM_DEVICE;
else
- hwif->sg_dma_direction = PCI_DMA_TODEVICE;
+ hwif->sg_dma_direction = DMA_TO_DEVICE;
- return pci_map_sg(hwif->pci_dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+ return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
+ hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_build_sglist);
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_dmatable - build IDE DMA table
*
@@ -284,16 +282,17 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
*--table |= cpu_to_le32(0x80000000);
return count;
}
+
printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
+
use_pio_instead:
- pci_unmap_sg(hwif->pci_dev,
- hwif->sg_table,
- hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
+
return 0; /* revert to PIO for this request */
}
EXPORT_SYMBOL_GPL(ide_build_dmatable);
+#endif
/**
* ide_destroy_dmatable - clean up DMA mapping
@@ -308,15 +307,15 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
void ide_destroy_dmatable (ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- struct scatterlist *sg = HWIF(drive)->sg_table;
- int nents = HWIF(drive)->sg_nents;
+ ide_hwif_t *hwif = drive->hwif;
- pci_unmap_sg(dev, sg, nents, HWIF(drive)->sg_dma_direction);
+ dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+ hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* config_drive_for_dma - attempt to activate IDE DMA
* @drive: the drive to place in DMA mode
@@ -474,8 +473,6 @@ void ide_dma_on(ide_drive_t *drive)
drive->hwif->dma_host_set(drive, 1);
}
-EXPORT_SYMBOL(ide_dma_on);
-
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_dma_setup - begin a DMA phase
@@ -847,10 +844,10 @@ EXPORT_SYMBOL(ide_dma_timeout);
static void ide_release_dma_engine(ide_hwif_t *hwif)
{
if (hwif->dmatable_cpu) {
- pci_free_consistent(hwif->pci_dev,
- PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu,
- hwif->dmatable_dma);
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+
+ pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
}
@@ -878,7 +875,9 @@ int ide_release_dma(ide_hwif_t *hwif)
static int ide_allocate_dma_engine(ide_hwif_t *hwif)
{
- hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+
+ hwif->dmatable_cpu = pci_alloc_consistent(pdev,
PRD_ENTRIES * PRD_BYTES,
&hwif->dmatable_dma);
@@ -891,19 +890,19 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif)
return 1;
}
-static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
+static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: MMIO-DMA ", hwif->name);
return 0;
}
-static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
+static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
- hwif->name, base, base + ports - 1);
+ hwif->name, base, base + 7);
- if (!request_region(base, ports, hwif->name)) {
+ if (!request_region(base, 8, hwif->name)) {
printk(" -- Error, ports in use.\n");
return 1;
}
@@ -915,7 +914,7 @@ static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int port
if (!request_region(hwif->extra_base,
hwif->cds->extra, hwif->cds->name)) {
printk(" -- Error, extra ports in use.\n");
- release_region(base, ports);
+ release_region(base, 8);
return 1;
}
hwif->extra_ports = hwif->cds->extra;
@@ -925,17 +924,19 @@ static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int port
return 0;
}
-static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
+static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base)
{
if (hwif->mmio)
- return ide_mapped_mmio_dma(hwif, base,ports);
+ return ide_mapped_mmio_dma(hwif, base);
- return ide_iomio_dma(hwif, base, ports);
+ return ide_iomio_dma(hwif, base);
}
-void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
+void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
{
- if (ide_dma_iobase(hwif, base, num_ports))
+ u8 dma_stat;
+
+ if (ide_dma_iobase(hwif, base))
return;
if (ide_allocate_dma_engine(hwif)) {
@@ -945,16 +946,16 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
hwif->dma_base = base;
- if (!(hwif->dma_command))
- hwif->dma_command = hwif->dma_base;
- if (!(hwif->dma_vendor1))
- hwif->dma_vendor1 = (hwif->dma_base + 1);
- if (!(hwif->dma_status))
- hwif->dma_status = (hwif->dma_base + 2);
- if (!(hwif->dma_vendor3))
- hwif->dma_vendor3 = (hwif->dma_base + 3);
- if (!(hwif->dma_prdtable))
- hwif->dma_prdtable = (hwif->dma_base + 4);
+ if (!hwif->dma_command)
+ hwif->dma_command = hwif->dma_base + 0;
+ if (!hwif->dma_vendor1)
+ hwif->dma_vendor1 = hwif->dma_base + 1;
+ if (!hwif->dma_status)
+ hwif->dma_status = hwif->dma_base + 2;
+ if (!hwif->dma_vendor3)
+ hwif->dma_vendor3 = hwif->dma_base + 3;
+ if (!hwif->dma_prdtable)
+ hwif->dma_prdtable = hwif->dma_base + 4;
if (!hwif->dma_host_set)
hwif->dma_host_set = &ide_dma_host_set;
@@ -973,13 +974,10 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
if (!hwif->dma_lost_irq)
hwif->dma_lost_irq = &ide_dma_lost_irq;
- if (hwif->chipset != ide_trm290) {
- u8 dma_stat = hwif->INB(hwif->dma_status);
- printk(", BIOS settings: %s:%s, %s:%s",
- hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "pio",
- hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio");
- }
- printk("\n");
+ dma_stat = hwif->INB(hwif->dma_status);
+ printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n",
+ hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO",
+ hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO");
}
EXPORT_SYMBOL_GPL(ide_setup_dma);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index ff8232e..3512637 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1,13 +1,12 @@
/*
- * linux/drivers/ide/ide-floppy.c Version 0.99 Feb 24 2002
+ * IDE ATAPI floppy driver.
*
- * Copyright (C) 1996 - 1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
- * Copyright (C) 2000 - 2002 Paul Bristow <paul@xxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * Copyright (C) 2000-2002 Paul Bristow <paul@xxxxxxxxxxxxxxx>
+ * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
*/
/*
- * IDE ATAPI floppy driver.
- *
* The driver currently doesn't have any fancy features, just the bare
* minimum read/write support.
*
@@ -17,67 +16,8 @@
* Iomega Zip 100/250
* Iomega PC Card Clik!/PocketZip
*
- * Many thanks to Lode Leroy <Lode.Leroy@xxxxxxxxxxxx>, who tested so many
- * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
- *
- * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
- * Ver 0.2 Oct 31 96 Minor changes.
- * Ver 0.3 Dec 2 96 Fixed error recovery bug.
- * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
- * Ver 0.5 Feb 21 97 Add partitions support.
- * Use the minimum of the LBA and CHS capacities.
- * Avoid hwgroup->rq == NULL on the last irq.
- * Fix potential null dereferencing with DEBUG_LOG.
- * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
- * Add media write-protect detection.
- * Issue START command only if TEST UNIT READY fails.
- * Add work-around for IOMEGA ZIP revision 21.D.
- * Remove idefloppy_get_capabilities().
- * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
- * bytes requested on each interrupt to be zero.
- * Thanks to <shanos@xxxxxxxx> for pointing this out.
- * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@xxxxxxxxxxxxxxx>
- * Implement low level formatting. Reimplemented
- * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
- * bit. My LS-120 drive barfs on
- * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
- * Compromise by not reporting a failure to get this
- * mode page. Implemented four IOCTLs in order to
- * implement formatting. IOCTls begin with 0x4600,
- * 0x46 is 'F' as in Format.
- * Jan 9 01 Userland option to select format verify.
- * Added PC_SUPPRESS_ERROR flag - some idefloppy drives
- * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
- * return a sense error. Suppress error reporting in
- * this particular case in order to avoid spurious
- * errors in syslog. The culprit is
- * idefloppy_get_capability_page(), so move it to
- * idefloppy_begin_format() so that it's not used
- * unless absolutely necessary.
- * If drive does not support format progress indication
- * monitor the dsc bit in the status register.
- * Also, O_NDELAY on open will allow the device to be
- * opened without a disk available. This can be used to
- * open an unformatted disk, or get the device capacity.
- * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
- * <paul@xxxxxxxxxxxxxxx>
- * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
- * driver. Included Powerbook internal zip kludge.
- * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
- * no disk on insert and disk change now works
- * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
- * Ver 0.95 Nov 7 00 Brought across to kernel 2.4
- * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
- * including set_bit patch from Rusty Russell
- * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
- * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
- * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
- * fix a lost interrupt problem. It appears the busy
- * bit was being deasserted by my IOMEGA ATAPI ZIP 100
- * drive before the drive was actually ready.
- * Ver 0.98a Oct 29 01 Expose delay value so we can play.
- * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
- * to support new PocketZip drives
+ * For a historical changelog see
+ * Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
#define IDEFLOPPY_VERSION "0.99.newide"
@@ -1658,7 +1598,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
{
struct idefloppy_id_gcw gcw;
#if IDEFLOPPY_DEBUG_INFO
- u16 mask,i;
char buffer[80];
#endif /* IDEFLOPPY_DEBUG_INFO */
@@ -1705,55 +1644,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
default: sprintf(buffer, "Reserved");break;
}
printk(KERN_INFO "Command Packet Size: %s\n", buffer);
- printk(KERN_INFO "Model: %.40s\n",id->model);
- printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev);
- printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no);
- printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
- printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
- printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
- printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
- printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
- printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
- printk(KERN_INFO "Single Word DMA supported modes:\n");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_1word & mask)
- printk(KERN_INFO " Mode %d%s\n", i,
- (id->dma_1word & (mask << 8)) ? " (active)" : "");
- }
- printk(KERN_INFO "Multi Word DMA supported modes:\n");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_mword & mask)
- printk(KERN_INFO " Mode %d%s\n", i,
- (id->dma_mword & (mask << 8)) ? " (active)" : "");
- }
- if (id->field_valid & 0x0002) {
- printk(KERN_INFO "Enhanced PIO Modes: %s\n",
- id->eide_pio_modes & 1 ? "Mode 3":"None");
- if (id->eide_dma_min == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_dma_min);
- printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
- if (id->eide_dma_time == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_dma_time);
- printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
- if (id->eide_pio == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_pio);
- printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n",
- buffer);
- if (id->eide_pio_iordy == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_pio_iordy);
- printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
- } else
- printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
#endif /* IDEFLOPPY_DEBUG_INFO */
if (gcw.protocol != 2)
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index e6bb9cf..4bddef0 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -1487,7 +1487,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
* remove all the ifdef PCI crap
*/
#ifdef CONFIG_BLK_DEV_IDEPCI
- if (hwif->pci_dev && !hwif->pci_dev->vendor)
+ if (hwif->chipset != ide_pci)
#endif /* CONFIG_BLK_DEV_IDEPCI */
{
/*
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e2a7e95..16b1f6e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ide-iops.c Version 0.37 Mar 05, 2003
- *
* Copyright (C) 2000-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
*
@@ -1168,7 +1166,7 @@ EXPORT_SYMBOL(ide_do_reset);
/*
* ide_wait_not_busy() waits for the currently selected device on the hwif
- * to report a non-busy status, see comments in probe_hwif().
+ * to report a non-busy status, see comments in ide_probe_port().
*/
int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
{
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 9b44fbd..b42940d 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -358,8 +358,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
if (!PCI_DMA_BUS_IS_PHYS) {
addr = BLK_BOUNCE_ANY;
} else if (on && drive->media == ide_disk) {
- if (HWIF(drive)->pci_dev)
- addr = HWIF(drive)->pci_dev->dma_mask;
+ struct device *dev = drive->hwif->dev;
+
+ if (dev && dev->dma_mask)
+ addr = *dev->dma_mask;
}
if (drive->queue)
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index cbbb0f7..4bda5cf 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ide-pnp.c
- *
* This file provides autodetection for ISA PnP IDE interfaces.
* It was tested with "ESS ES1868 Plug and Play AudioDrive" IDE interface.
*
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index edf650b..98a8af4 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/ide-probe.c Version 1.11 Mar 05, 2003
- *
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
@@ -129,6 +128,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->id_read = 1;
local_irq_enable();
+#ifdef DEBUG
+ printk(KERN_INFO "%s: dumping identify data\n", drive->name);
+ ide_dump_identify((u8 *)id);
+#endif
ide_fix_driveid(id);
#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
@@ -610,7 +613,7 @@ static void hwif_release_dev (struct device *dev)
complete(&hwif->gendev_rel_comp);
}
-static void hwif_register (ide_hwif_t *hwif)
+static void ide_register_port(ide_hwif_t *hwif)
{
int ret;
@@ -618,8 +621,8 @@ static void hwif_register (ide_hwif_t *hwif)
strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
hwif->gendev.driver_data = hwif;
if (hwif->gendev.parent == NULL) {
- if (hwif->pci_dev)
- hwif->gendev.parent = &hwif->pci_dev->dev;
+ if (hwif->dev)
+ hwif->gendev.parent = hwif->dev;
else
/* Would like to do = &device_legacy */
hwif->gendev.parent = NULL;
@@ -631,7 +634,33 @@ static void hwif_register (ide_hwif_t *hwif)
__FUNCTION__, ret);
}
-static int wait_hwif_ready(ide_hwif_t *hwif)
+/**
+ * ide_port_wait_ready - wait for port to become ready
+ * @hwif: IDE port
+ *
+ * This is needed on some PPCs and a bunch of BIOS-less embedded
+ * platforms. Typical cases are:
+ *
+ * - The firmware hard reset the disk before booting the kernel,
+ * the drive is still doing it's poweron-reset sequence, that
+ * can take up to 30 seconds.
+ *
+ * - The firmware does nothing (or no firmware), the device is
+ * still in POST state (same as above actually).
+ *
+ * - Some CD/DVD/Writer combo drives tend to drive the bus during
+ * their reset sequence even when they are non-selected slave
+ * devices, thus preventing discovery of the main HD.
+ *
+ * Doing this wait-for-non-busy should not harm any existing
+ * configuration and fix some issues like the above.
+ *
+ * BenH.
+ *
+ * Returns 0 on success, error code (< 0) otherwise.
+ */
+
+static int ide_port_wait_ready(ide_hwif_t *hwif)
{
int unit, rc;
@@ -709,36 +738,16 @@ void ide_undecoded_slave(ide_drive_t *drive1)
EXPORT_SYMBOL_GPL(ide_undecoded_slave);
-/*
- * This routine only knows how to look for drive units 0 and 1
- * on an interface, so any setting of MAX_DRIVES > 2 won't work here.
- */
-static void probe_hwif(ide_hwif_t *hwif)
+static int ide_probe_port(ide_hwif_t *hwif)
{
unsigned long flags;
unsigned int irqd;
- int unit;
+ int unit, rc = -ENODEV;
- if (hwif->noprobe)
- return;
+ BUG_ON(hwif->present);
- if ((hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) &&
- (ide_hwif_request_regions(hwif))) {
- u16 msgout = 0;
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
- ide_drive_t *drive = &hwif->drives[unit];
- if (drive->present) {
- drive->present = 0;
- printk(KERN_ERR "%s: ERROR, PORTS ALREADY IN USE\n",
- drive->name);
- msgout = 1;
- }
- }
- if (!msgout)
- printk(KERN_ERR "%s: ports already in use, skipping probe\n",
- hwif->name);
- return;
- }
+ if (hwif->noprobe)
+ return -EACCES;
/*
* We must always disable IRQ, as probe_for_drive will assert IRQ, but
@@ -750,26 +759,7 @@ static void probe_hwif(ide_hwif_t *hwif)
local_irq_set(flags);
- /* This is needed on some PPCs and a bunch of BIOS-less embedded
- * platforms. Typical cases are:
- *
- * - The firmware hard reset the disk before booting the kernel,
- * the drive is still doing it's poweron-reset sequence, that
- * can take up to 30 seconds
- * - The firmware does nothing (or no firmware), the device is
- * still in POST state (same as above actually).
- * - Some CD/DVD/Writer combo drives tend to drive the bus during
- * their reset sequence even when they are non-selected slave
- * devices, thus preventing discovery of the main HD
- *
- * Doing this wait-for-busy should not harm any existing configuration
- * (at least things won't be worse than what current code does, that
- * is blindly go & talk to the drive) and fix some issues like the
- * above.
- *
- * BenH.
- */
- if (wait_hwif_ready(hwif) == -EBUSY)
+ if (ide_port_wait_ready(hwif) == -EBUSY)
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
@@ -779,14 +769,8 @@ static void probe_hwif(ide_hwif_t *hwif)
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
- if (drive->present && !hwif->present) {
- hwif->present = 1;
- if (hwif->chipset != ide_4drives ||
- !hwif->mate ||
- !hwif->mate->present) {
- hwif_register(hwif);
- }
- }
+ if (drive->present)
+ rc = 0;
}
if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) {
printk(KERN_WARNING "%s: reset\n", hwif->name);
@@ -803,10 +787,12 @@ static void probe_hwif(ide_hwif_t *hwif)
if (irqd)
enable_irq(irqd);
- if (!hwif->present) {
- ide_hwif_release_regions(hwif);
- return;
- }
+ return rc;
+}
+
+static void ide_port_tune_devices(ide_hwif_t *hwif)
+{
+ int unit;
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
@@ -997,21 +983,17 @@ static int init_irq (ide_hwif_t *hwif)
spin_lock_irq(&ide_lock);
hwif->next = hwgroup->hwif->next;
hwgroup->hwif->next = hwif;
+ BUG_ON(hwif->next == hwif);
spin_unlock_irq(&ide_lock);
} else {
- hwgroup = kmalloc_node(sizeof(ide_hwgroup_t),
- GFP_KERNEL | __GFP_ZERO,
- hwif_to_node(hwif->drives[0].hwif));
- if (!hwgroup)
- goto out_up;
+ hwgroup = kmalloc_node(sizeof(*hwgroup), GFP_KERNEL|__GFP_ZERO,
+ hwif_to_node(hwif));
+ if (hwgroup == NULL)
+ goto out_up;
hwif->hwgroup = hwgroup;
+ hwgroup->hwif = hwif->next = hwif;
- hwgroup->hwif = hwif->next = hwif;
- hwgroup->rq = NULL;
- hwgroup->handler = NULL;
- hwgroup->drive = NULL;
- hwgroup->busy = 0;
init_timer(&hwgroup->timer);
hwgroup->timer.function = &ide_timer_expiry;
hwgroup->timer.data = (unsigned long) hwgroup;
@@ -1079,25 +1061,7 @@ static int init_irq (ide_hwif_t *hwif)
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
- spin_lock_irq(&ide_lock);
- if (hwif->next == hwif) {
- BUG_ON(match);
- BUG_ON(hwgroup->hwif != hwif);
- kfree(hwgroup);
- } else {
- ide_hwif_t *g;
- g = hwgroup->hwif;
- while (g->next != hwif)
- g = g->next;
- g->next = hwif->next;
- if (hwgroup->hwif == hwif) {
- /* Impossible. */
- printk(KERN_ERR "Duh. Uninitialized hwif listed as active hwif.\n");
- hwgroup->hwif = g;
- }
- BUG_ON(hwgroup->hwif == hwif);
- }
- spin_unlock_irq(&ide_lock);
+ ide_remove_port_from_hwgroup(hwif);
out_up:
mutex_unlock(&ide_cfg_mtx);
return 1;
@@ -1246,28 +1210,21 @@ static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
- /* Return success if no device is connected */
- if (!hwif->present)
- return 1;
-
if (!hwif->irq) {
if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET])))
{
printk("%s: DISABLED, NO IRQ\n", hwif->name);
- return (hwif->present = 0);
+ return 0;
}
}
#ifdef CONFIG_BLK_DEV_HD
if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) {
printk("%s: CANNOT SHARE IRQ WITH OLD "
"HARDDISK DRIVER (hd.c)\n", hwif->name);
- return (hwif->present = 0);
+ return 0;
}
#endif /* CONFIG_BLK_DEV_HD */
- /* we set it back to 1 if all is ok below */
- hwif->present = 0;
-
if (register_blkdev(hwif->major, hwif->name))
return 0;
@@ -1306,10 +1263,7 @@ static int hwif_init(ide_hwif_t *hwif)
done:
init_gendisk(hwif);
-
ide_acpi_init(hwif);
-
- hwif->present = 1; /* success */
return 1;
out:
@@ -1344,7 +1298,27 @@ int ide_device_add_all(u8 *idx)
if (idx[i] == 0xff)
continue;
- probe_hwif(&ide_hwifs[idx[i]]);
+ hwif = &ide_hwifs[idx[i]];
+
+ if ((hwif->chipset != ide_4drives || !hwif->mate ||
+ !hwif->mate->present) && ide_hwif_request_regions(hwif)) {
+ printk(KERN_ERR "%s: ports already in use, "
+ "skipping probe\n", hwif->name);
+ continue;
+ }
+
+ if (ide_probe_port(hwif) < 0) {
+ ide_hwif_release_regions(hwif);
+ continue;
+ }
+
+ hwif->present = 1;
+
+ if (hwif->chipset != ide_4drives || !hwif->mate ||
+ !hwif->mate->present)
+ ide_register_port(hwif);
+
+ ide_port_tune_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
@@ -1353,9 +1327,13 @@ int ide_device_add_all(u8 *idx)
hwif = &ide_hwifs[idx[i]];
+ if (!hwif->present)
+ continue;
+
if (hwif_init(hwif) == 0) {
printk(KERN_INFO "%s: failed to initialize IDE "
"interface\n", hwif->name);
+ hwif->present = 0;
rc = -1;
continue;
}
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index aa663e7..00c249c 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ide-proc.c Version 1.05 Mar 05, 2003
- *
* Copyright (C) 1997-1998 Mark Lord
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
*
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
index 7ffa332..93d2e41 100644
--- a/drivers/ide/ide-scan-pci.c
+++ b/drivers/ide/ide-scan-pci.c
@@ -81,7 +81,7 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
* module ordering not traditionally ordered.
*/
-int __init ide_scan_pcibus(void)
+static int __init ide_scan_pcibus(void)
{
struct pci_dev *dev = NULL;
struct pci_driver *d;
@@ -113,9 +113,4 @@ int __init ide_scan_pcibus(void)
return 0;
}
-static int __init ide_scan_pci(void)
-{
- return ide_scan_pcibus();
-}
-
-module_init(ide_scan_pci);
+module_init(ide_scan_pcibus);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d71a584..5aef63a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/ide-tape.c Version 1.19 Nov, 2003
- *
- * Copyright (C) 1995 - 1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * Copyright (C) 1995-1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
*
* $Header$
*
@@ -4291,9 +4290,6 @@ static int idetape_identify_device (ide_drive_t *drive)
{
struct idetape_id_gcw gcw;
struct hd_driveid *id = drive->id;
-#if IDETAPE_DEBUG_INFO
- unsigned short mask,i;
-#endif /* IDETAPE_DEBUG_INFO */
if (drive->id_read == 0)
return 1;
@@ -4333,62 +4329,6 @@ static int idetape_identify_device (ide_drive_t *drive)
case 1: printk("16 bytes\n");break;
default: printk("Reserved\n");break;
}
- printk(KERN_INFO "ide-tape: Model: %.40s\n",id->model);
- printk(KERN_INFO "ide-tape: Firmware Revision: %.8s\n",id->fw_rev);
- printk(KERN_INFO "ide-tape: Serial Number: %.20s\n",id->serial_no);
- printk(KERN_INFO "ide-tape: Write buffer size: %d bytes\n",id->buf_size*512);
- printk(KERN_INFO "ide-tape: DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
- printk(KERN_INFO "ide-tape: ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: PIO Cycle Timing Category: %d\n",id->tPIO);
- printk(KERN_INFO "ide-tape: DMA Cycle Timing Category: %d\n",id->tDMA);
- printk(KERN_INFO "ide-tape: Single Word DMA supported modes: ");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_1word & mask)
- printk("%d ",i);
- if (id->dma_1word & (mask << 8))
- printk("(active) ");
- }
- printk("\n");
- printk(KERN_INFO "ide-tape: Multi Word DMA supported modes: ");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_mword & mask)
- printk("%d ",i);
- if (id->dma_mword & (mask << 8))
- printk("(active) ");
- }
- printk("\n");
- if (id->field_valid & 0x0002) {
- printk(KERN_INFO "ide-tape: Enhanced PIO Modes: %s\n",
- id->eide_pio_modes & 1 ? "Mode 3":"None");
- printk(KERN_INFO "ide-tape: Minimum Multi-word DMA cycle per word: ");
- if (id->eide_dma_min == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_dma_min);
-
- printk(KERN_INFO "ide-tape: Manufacturer\'s Recommended Multi-word cycle: ");
- if (id->eide_dma_time == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_dma_time);
-
- printk(KERN_INFO "ide-tape: Minimum PIO cycle without IORDY: ");
- if (id->eide_pio == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_pio);
-
- printk(KERN_INFO "ide-tape: Minimum PIO cycle with IORDY: ");
- if (id->eide_pio_iordy == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_pio_iordy);
-
- } else
- printk(KERN_INFO "ide-tape: According to the device, fields 64-70 are not valid.\n");
#endif /* IDETAPE_DEBUG_INFO */
/* Check that we can support this device */
@@ -4591,19 +4531,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
spin_lock_init(&tape->spinlock);
drive->dsc_overlap = 1;
-#ifdef CONFIG_BLK_DEV_IDEPCI
- if (HWIF(drive)->pci_dev != NULL) {
- /*
- * These two ide-pci host adapters appear to need DSC overlap disabled.
- * This probably needs further analysis.
- */
- if ((HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) ||
- (HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_TTI_HPT343)) {
- printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", tape->name);
- drive->dsc_overlap = 0;
- }
+ if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
+ printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
+ tape->name);
+ drive->dsc_overlap = 0;
}
-#endif /* CONFIG_BLK_DEV_IDEPCI */
/* Seagate Travan drives do not support DSC overlap. */
if (strstr(drive->id->model, "Seagate STT3401"))
drive->dsc_overlap = 0;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 5eb6fa1..16a9a58 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -1,11 +1,9 @@
/*
- * linux/drivers/ide/ide-taskfile.c Version 0.38 March 05, 2003
- *
- * Copyright (C) 2000-2002 Michael Cornwell <cornwell@xxxxxxx>
- * Copyright (C) 2000-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
- * Copyright (C) 2001-2002 Klaus Smolin
+ * Copyright (C) 2000-2002 Michael Cornwell <cornwell@xxxxxxx>
+ * Copyright (C) 2000-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
+ * Copyright (C) 2001-2002 Klaus Smolin
* IBM Storage Technology Division
- * Copyright (C) 2003-2004 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz
*
* The big the bad and the ugly.
*/
@@ -260,7 +258,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
return ide_stopped;
}
-u8 wait_drive_not_busy(ide_drive_t *drive)
+static u8 wait_drive_not_busy(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
int retries;
diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
index daffbb9..adeda76 100644
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -2,8 +2,6 @@
#define _IDE_TIMING_H
/*
- * $Id: ide-timing.h,v 1.6 2001/12/23 22:47:56 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*/
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 97894ab..ab9ca2b 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/ide.c Version 7.00beta2 Mar 05 2003
- *
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
+ * Copyrifht (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
@@ -46,7 +45,6 @@
*/
#define REVISION "Revision: 7.00alpha2"
-#define VERSION "Id: ide.c 7.00a2 20020906"
#define _IDE_C /* Tell ide.h it's really us */
@@ -242,22 +240,12 @@ static int ide_system_bus_speed(void)
#define pci_default 0
#endif /* CONFIG_PCI */
- if (!system_bus_speed) {
- if (idebus_parameter) {
- /* user supplied value */
- system_bus_speed = idebus_parameter;
- } else if (pci_dev_present(pci_default)) {
- /* safe default value for PCI */
- system_bus_speed = 33;
- } else {
- /* safe default value for VESA and PCI */
- system_bus_speed = 50;
- }
- printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
- "for PIO modes%s\n", system_bus_speed,
- idebus_parameter ? "" : "; override with idebus=xx");
- }
- return system_bus_speed;
+ /* user supplied value */
+ if (idebus_parameter)
+ return idebus_parameter;
+
+ /* safe default value for PCI or VESA and PCI*/
+ return pci_dev_present(pci_default) ? 33 : 50;
}
ide_hwif_t * ide_find_port(unsigned long base)
@@ -405,8 +393,9 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->chipset = tmp_hwif->chipset;
hwif->hold = tmp_hwif->hold;
+ hwif->dev = tmp_hwif->dev;
+
#ifdef CONFIG_BLK_DEV_IDEPCI
- hwif->pci_dev = tmp_hwif->pci_dev;
hwif->cds = tmp_hwif->cds;
#endif
@@ -472,6 +461,41 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->hwif_data = tmp_hwif->hwif_data;
}
+void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
+{
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
+
+ spin_lock_irq(&ide_lock);
+ /*
+ * Remove us from the hwgroup, and free
+ * the hwgroup if we were the only member
+ */
+ if (hwif->next == hwif) {
+ BUG_ON(hwgroup->hwif != hwif);
+ kfree(hwgroup);
+ } else {
+ /* There is another interface in hwgroup.
+ * Unlink us, and set hwgroup->drive and ->hwif to
+ * something sane.
+ */
+ ide_hwif_t *g = hwgroup->hwif;
+
+ while (g->next != hwif)
+ g = g->next;
+ g->next = hwif->next;
+ if (hwgroup->hwif == hwif) {
+ /* Chose a random hwif for hwgroup->hwif.
+ * It's guaranteed that there are no drives
+ * left in the hwgroup.
+ */
+ BUG_ON(hwgroup->drive != NULL);
+ hwgroup->hwif = g;
+ }
+ BUG_ON(hwgroup->hwif == hwif);
+ }
+ spin_unlock_irq(&ide_lock);
+}
+
/**
* ide_unregister - free an IDE interface
* @index: index of interface (will change soon to a pointer)
@@ -539,43 +563,8 @@ void ide_unregister(unsigned int index)
if (irq_count == 1)
free_irq(hwif->irq, hwgroup);
- spin_lock_irq(&ide_lock);
- /*
- * Note that we only release the standard ports,
- * and do not even try to handle any extra ports
- * allocated for weird IDE interface chipsets.
- */
- ide_hwif_release_regions(hwif);
-
- /*
- * Remove us from the hwgroup, and free
- * the hwgroup if we were the only member
- */
- if (hwif->next == hwif) {
- BUG_ON(hwgroup->hwif != hwif);
- kfree(hwgroup);
- } else {
- /* There is another interface in hwgroup.
- * Unlink us, and set hwgroup->drive and ->hwif to
- * something sane.
- */
- g = hwgroup->hwif;
- while (g->next != hwif)
- g = g->next;
- g->next = hwif->next;
- if (hwgroup->hwif == hwif) {
- /* Chose a random hwif for hwgroup->hwif.
- * It's guaranteed that there are no drives
- * left in the hwgroup.
- */
- BUG_ON(hwgroup->drive != NULL);
- hwgroup->hwif = g;
- }
- BUG_ON(hwgroup->hwif == hwif);
- }
+ ide_remove_port_from_hwgroup(hwif);
- /* More messed up locking ... */
- spin_unlock_irq(&ide_lock);
device_unregister(&hwif->gendev);
wait_for_completion(&hwif->gendev_rel_comp);
@@ -601,6 +590,13 @@ void ide_unregister(unsigned int index)
hwif->extra_ports = 0;
}
+ /*
+ * Note that we only release the standard ports,
+ * and do not even try to handle any extra ports
+ * allocated for weird IDE interface chipsets.
+ */
+ ide_hwif_release_regions(hwif);
+
/* copy original settings */
tmp_hwif = *hwif;
@@ -913,7 +909,7 @@ static int set_unmaskirq(ide_drive_t *drive, int arg)
int system_bus_clock (void)
{
- return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
+ return system_bus_speed;
}
EXPORT_SYMBOL(system_bus_clock);
@@ -1668,6 +1664,10 @@ static int __init ide_init(void)
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
system_bus_speed = ide_system_bus_speed();
+ printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
+ "for PIO modes%s\n", system_bus_speed,
+ idebus_parameter ? "" : "; override with idebus=xx");
+
ret = bus_register(&ide_bus_type);
if (ret < 0) {
printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 5ec0be4..e3ea209 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/ali14xx.c Version 0.03 Feb 09, 1996
- *
* Copyright (C) 1996 Linus Torvalds & author (see below)
*/
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 74d28e0..dd3d198 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/legacy/buddha.c -- Amiga Buddha, Catweasel and X-Surf IDE Driver
+ * Amiga Buddha, Catweasel and X-Surf IDE Driver
*
* Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
*
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 13eee6d..611c970 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/dtc2278.c Version 0.02 Feb 10, 1996
- *
* Copyright (C) 1996 Linus Torvalds & author (see below)
*/
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 2860956..c9bd6bf 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/legacy/falconide.c -- Atari Falcon IDE Driver
+ * Atari Falcon IDE Driver
*
* Created 12 Jul 1997 by Geert Uytterhoeven
*
@@ -66,6 +66,7 @@ static int __init falconide_init(void)
{
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
+ ide_hwif_t *hwif;
printk(KERN_INFO "ide: Falcon IDE controller\n");
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 492fa04..f67c51a 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/legacy/gayle.c -- Amiga Gayle IDE Driver
+ * Amiga Gayle IDE Driver
*
* Created 9 Jul 1997 by Geert Uytterhoeven
*
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 8da5031..57bc15c 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/ht6560b.c Version 0.07 Feb 1, 2000
- *
* Copyright (C) 1995-2000 Linus Torvalds & author (see below)
*/
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index f4ea15b..3bd2967 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -2,8 +2,6 @@
A driver for PCMCIA IDE/ATA disk cards
- ide-cs.c 1.3 2002/10/26 05:45:31
-
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 69a0fb0..7c3231a 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -21,13 +21,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-static struct {
- void __iomem *plat_ide_mapbase;
- void __iomem *plat_ide_alt_mapbase;
- ide_hwif_t *hwif;
- int index;
-} hwif_prop;
-
static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
void __iomem *base,
void __iomem *ctrl,
@@ -54,6 +47,7 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
static int __devinit plat_ide_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_alt, *res_irq;
+ void __iomem *base, *alt_base;
ide_hwif_t *hwif;
struct pata_platform_info *pdata;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -84,27 +78,25 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
}
if (mmio) {
- hwif_prop.plat_ide_mapbase = devm_ioremap(&pdev->dev,
+ base = devm_ioremap(&pdev->dev,
res_base->start, res_base->end - res_base->start + 1);
- hwif_prop.plat_ide_alt_mapbase = devm_ioremap(&pdev->dev,
+ alt_base = devm_ioremap(&pdev->dev,
res_alt->start, res_alt->end - res_alt->start + 1);
} else {
- hwif_prop.plat_ide_mapbase = devm_ioport_map(&pdev->dev,
+ base = devm_ioport_map(&pdev->dev,
res_base->start, res_base->end - res_base->start + 1);
- hwif_prop.plat_ide_alt_mapbase = devm_ioport_map(&pdev->dev,
+ alt_base = devm_ioport_map(&pdev->dev,
res_alt->start, res_alt->end - res_alt->start + 1);
}
- hwif = ide_find_port((unsigned long)hwif_prop.plat_ide_mapbase);
+ hwif = ide_find_port((unsigned long)base);
if (!hwif) {
ret = -ENODEV;
goto out;
}
memset(&hw, 0, sizeof(hw));
- plat_ide_setup_ports(&hw, hwif_prop.plat_ide_mapbase,
- hwif_prop.plat_ide_alt_mapbase,
- pdata, res_irq->start);
+ plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
hw.dev = &pdev->dev;
ide_init_port_hw(hwif, &hw);
@@ -114,9 +106,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
default_hwif_mmiops(hwif);
}
- hwif_prop.hwif = hwif;
- hwif_prop.index = hwif->index;
-
idx[0] = hwif->index;
ide_device_add(idx);
@@ -133,14 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev)
{
ide_hwif_t *hwif = pdev->dev.driver_data;
- if (hwif != hwif_prop.hwif) {
- dev_printk(KERN_DEBUG, &pdev->dev, "%s: hwif value error",
- pdev->name);
- } else {
- ide_unregister(hwif_prop.index);
- hwif_prop.index = 0;
- hwif_prop.hwif = NULL;
- }
+ ide_unregister(hwif->index);
return 0;
}
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 782d4c7..c54d07f 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver
+ * Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index f532973..a9c6b06 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/legacy/q40ide.c -- Q40 I/O port IDE Driver
+ * Q40 I/O port IDE Driver
*
* (c) Richard Zidlicky
*
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 2bac4c1..37534bb 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/qd65xx.c Version 0.07 Sep 30, 2001
- *
* Copyright (C) 1996-2001 Linus Torvalds & author (see below)
*/
diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/legacy/qd65xx.h
index 633a424..28dd50a 100644
--- a/drivers/ide/legacy/qd65xx.h
+++ b/drivers/ide/legacy/qd65xx.h
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/qd65xx.h
- *
* Copyright (c) 2000 Linus Torvalds & authors
*/
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index a1ae1ae..26f38ce 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/legacy/umc8672.c Version 0.05 Jul 31, 1996
- *
* Copyright (C) 1995-1996 Linus Torvalds & author (see below)
*/
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 2d3e511..cd42b30 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005
- *
* BRIEF MODULE DESCRIPTION
* AMD Alchemy Au1xxx IDE interface routines over the Static Bus
*
@@ -50,7 +48,6 @@
#include <asm/mach-au1x00/au1xxx_ide.h>
#define DRV_NAME "au1200-ide"
-#define DRV_VERSION "1.0"
#define DRV_AUTHOR "Enrico Walther <enrico.walther@xxxxxxx> / Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>"
/* enable the burstmode in the dbdma */
@@ -209,24 +206,6 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-
-static int auide_build_sglist(ide_drive_t *drive, struct request *rq)
-{
- ide_hwif_t *hwif = drive->hwif;
- _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
- struct scatterlist *sg = hwif->sg_table;
-
- ide_map_sg(drive, rq);
-
- if (rq_data_dir(rq) == READ)
- hwif->sg_dma_direction = DMA_FROM_DEVICE;
- else
- hwif->sg_dma_direction = DMA_TO_DEVICE;
-
- return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
- hwif->sg_dma_direction);
-}
-
static int auide_build_dmatable(ide_drive_t *drive)
{
int i, iswrite, count = 0;
@@ -241,8 +220,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
/* Save for interrupt context */
ahwif->drive = drive;
- /* Build sglist */
- hwif->sg_nents = i = auide_build_sglist(drive, rq);
+ hwif->sg_nents = i = ide_build_sglist(drive, rq);
if (!i)
return 0;
@@ -300,10 +278,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
return 1;
use_pio_instead:
- dma_unmap_sg(ahwif->dev,
- hwif->sg_table,
- hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@@ -311,11 +286,9 @@ static int auide_build_dmatable(ide_drive_t *drive)
static int auide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
if (hwif->sg_nents) {
- dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
@@ -504,7 +477,7 @@ static int auide_ddma_init(_auide_hwif *auide) {
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
NUM_DESCRIPTORS);
- hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
+ hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
PRD_ENTRIES * PRD_BYTES, /* 1 Page */
&hwif->dmatable_dma, GFP_KERNEL);
@@ -592,9 +565,6 @@ static int au_ide_probe(struct device *dev)
#endif
memset(&auide_hwif, 0, sizeof(_auide_hwif));
- auide_hwif.dev = 0;
-
- ahwif->dev = dev;
ahwif->irq = platform_get_irq(pdev, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -629,10 +599,13 @@ static int au_ide_probe(struct device *dev)
memset(&hw, 0, sizeof(hw));
auide_setup_ports(&hw, ahwif);
hw.irq = ahwif->irq;
+ hw.dev = dev;
hw.chipset = ide_au1xxx;
ide_init_port_hw(hwif, &hw);
+ hwif->dev = dev;
+
hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
@@ -715,7 +688,7 @@ static int au_ide_remove(struct device *dev)
ide_hwif_t *hwif = dev_get_drvdata(dev);
_auide_hwif *ahwif = &auide_hwif;
- ide_unregister(hwif - ide_hwifs);
+ ide_unregister(hwif->index);
iounmap((void *)ahwif->regbase);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 7f4d185..824df78 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/aec62xx.c Version 0.27 Sep 16, 2007
- *
* Copyright (C) 1999-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2007 MontaVista Software, Inc. <source@xxxxxxxxxx>
*
@@ -90,7 +88,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 d_conf = 0;
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
@@ -116,7 +114,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@@ -170,7 +168,7 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &aec_set_pio_mode;
@@ -188,7 +186,7 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
- pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
+ pci_read_config_byte(dev, 0x49, &ata66);
hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
@@ -202,6 +200,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NO_DSC |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 49aa82e..130cc6e 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/alim15x3.c Version 0.29 Sep 16 2007
- *
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
* Copyright (C) 1999-2000 CJ, cjtsai@xxxxxxxxxx, Maintainer
@@ -293,7 +291,7 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
@@ -396,7 +394,7 @@ static u8 ali_udma_filter(ide_drive_t *drive)
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
@@ -625,7 +623,7 @@ static int ali_cable_override(struct pci_dev *pdev)
static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
u8 cbl = ATA_CBL_PATA40, tmpbyte;
@@ -688,12 +686,13 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ideic, inmir;
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
1, 11, 0, 12, 0, 14, 0, 15 };
int irq = -1;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229)
+ if (dev->device == PCI_DEVICE_ID_AL_M5229)
hwif->irq = hwif->channel ? 15 : 14;
if (isa_dev) {
@@ -745,7 +744,7 @@ static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
return;
if (!hwif->channel)
outb(inb(dmabase + 2) & 0x60, dmabase + 2);
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static const struct ide_port_info ali15x3_chipset __devinitdata = {
@@ -775,7 +774,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
};
struct ide_port_info d = ali15x3_chipset;
- u8 rev = dev->revision;
+ u8 rev = dev->revision, idx = id->driver_data;
if (pci_dev_present(ati_rs100))
printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
@@ -798,6 +797,9 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
d.udma_mask = ATA_UDMA6;
}
+ if (idx == 0)
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+
#if defined(CONFIG_SPARC64)
d.init_hwif = init_hwif_common_ali15x3;
#endif /* CONFIG_SPARC64 */
@@ -807,7 +809,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
static const struct pci_device_id alim15x3_pci_tbl[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 0 },
+ { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index cee51fd..8c52bc9 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,6 +1,4 @@
/*
- * Version 2.24
- *
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
*
@@ -28,81 +26,46 @@
#include "ide-timing.h"
-#define AMD_IDE_CONFIG (0x01 + amd_config->base)
-#define AMD_CABLE_DETECT (0x02 + amd_config->base)
-#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
-#define AMD_8BIT_TIMING (0x0e + amd_config->base)
-#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
-#define AMD_UDMA_TIMING (0x10 + amd_config->base)
-
-#define AMD_CHECK_SWDMA 0x08
-#define AMD_BAD_SWDMA 0x10
-#define AMD_BAD_FIFO 0x20
-#define AMD_CHECK_SERENADE 0x40
-
-/*
- * AMD SouthBridge chips.
- */
-
-static struct amd_ide_chip {
- unsigned short id;
- u8 base;
- u8 udma_mask;
- u8 flags;
-} amd_ide_chips[] = {
- { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
- { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
- { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
- { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
- { 0 }
+enum {
+ AMD_IDE_CONFIG = 0x41,
+ AMD_CABLE_DETECT = 0x42,
+ AMD_DRIVE_TIMING = 0x48,
+ AMD_8BIT_TIMING = 0x4e,
+ AMD_ADDRESS_SETUP = 0x4c,
+ AMD_UDMA_TIMING = 0x50,
};
-static struct amd_ide_chip *amd_config;
-static const struct ide_port_info *amd_chipset;
static unsigned int amd_80w;
static unsigned int amd_clock;
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
+static inline u8 amd_offset(struct pci_dev *dev)
+{
+ return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
+}
+
/*
* amd_set_speed() writes timing values to the chipset registers
*/
-static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
+static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
+ struct ide_timing *timing)
{
- unsigned char t;
+ u8 t = 0, offset = amd_offset(dev);
- pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
+ pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
+ pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
- pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
+ pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
- pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
+ pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
- switch (amd_config->udma_mask) {
+ switch (udma_mask) {
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
@@ -110,7 +73,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
default: return;
}
- pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
+ pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
}
/*
@@ -120,12 +83,15 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
{
- ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
+ u8 udma_mask = hwif->ultra_mask;
T = 1000000000 / amd_clock;
- UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
+ UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
ide_timing_compute(drive, speed, &t, T, UT);
@@ -137,7 +103,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
- amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+ amd_set_speed(dev, drive->dn, udma_mask, &t);
}
/*
@@ -149,67 +115,68 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
amd_set_drive(drive, XFER_PIO_0 + pio);
}
-/*
- * The initialization callback. Here we determine the IDE chip type
- * and initialize its drive independent registers.
- */
+static void __devinit amd7409_cable_detect(struct pci_dev *dev,
+ const char *name)
+{
+ /* no host side cable detection */
+ amd_80w = 0x03;
+}
-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
+static void __devinit amd7411_cable_detect(struct pci_dev *dev,
+ const char *name)
{
- unsigned char t;
- unsigned int u;
int i;
+ u32 u = 0;
+ u8 t = 0, offset = amd_offset(dev);
+
+ pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
+ pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
+ amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
+ printk(KERN_WARNING "%s: BIOS didn't set cable bits "
+ "correctly. Enabling workaround.\n",
+ name);
+ amd_80w |= (1 << (1 - (i >> 4)));
+ }
+}
/*
- * Check for bad SWDMA.
+ * The initialization callback. Initialize drive independent registers.
*/
- if (amd_config->flags & AMD_CHECK_SWDMA) {
- if (dev->revision <= 7)
- amd_config->flags |= AMD_BAD_SWDMA;
- }
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
+ const char *name)
+{
+ u8 t = 0, offset = amd_offset(dev);
/*
* Check 80-wire cable presence.
*/
- switch (amd_config->udma_mask) {
-
- case ATA_UDMA6:
- case ATA_UDMA5:
- pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
- pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
- amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
- amd_chipset->name);
- amd_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA4:
- /* no host side cable detection */
- amd_80w = 0x03;
- break;
- }
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
+ ; /* no UDMA > 2 */
+ else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
+ amd7409_cable_detect(dev, name);
+ else
+ amd7411_cable_detect(dev, name);
/*
* Take care of prefetch & postwrite.
*/
- pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
- pci_write_config_byte(dev, AMD_IDE_CONFIG,
- (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
-
-/*
- * Take care of incorrectly wired Serenade mainboards.
- */
-
- if ((amd_config->flags & AMD_CHECK_SERENADE) &&
- dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
- dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- amd_config->udma_mask = ATA_UDMA5;
+ pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
+ /*
+ * Check for broken FIFO support.
+ */
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+ t &= 0x0f;
+ else
+ t |= 0xf0;
+ pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
/*
* Determine the system bus clock.
@@ -225,25 +192,19 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
if (amd_clock < 20000 || amd_clock > 50000) {
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
- amd_chipset->name, amd_clock);
+ name, amd_clock);
amd_clock = 33333;
}
-/*
- * Print the boot message.
- */
-
- printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
- amd_chipset->name, pci_name(dev), dev->revision,
- amd_dma[fls(amd_config->udma_mask) - 1]);
-
return dev->irq;
}
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (hwif->irq == 0) /* 0 is bogus but will do for now */
- hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel);
+ hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
@@ -251,10 +212,6 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
- hwif->ultra_mask = amd_config->udma_mask;
- if (amd_config->flags & AMD_BAD_SWDMA)
- hwif->swdma_mask = 0x00;
-
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
if ((amd_80w >> hwif->channel) & 1)
hwif->cbl = ATA_CBL_PATA80;
@@ -272,7 +229,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
IDE_HFLAG_UNMASK_IRQS | \
IDE_HFLAG_BOOTABLE)
-#define DECLARE_AMD_DEV(name_str) \
+#define DECLARE_AMD_DEV(name_str, swdma, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@@ -280,11 +237,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
- .swdma_mask = ATA_SWDMA2, \
+ .swdma_mask = swdma, \
.mwdma_mask = ATA_MWDMA2, \
+ .udma_mask = udma, \
}
-#define DECLARE_NV_DEV(name_str) \
+#define DECLARE_NV_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@@ -294,45 +252,62 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
+ .udma_mask = udma, \
}
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_AMD_DEV("AMD7401"),
- /* 1 */ DECLARE_AMD_DEV("AMD7409"),
- /* 2 */ DECLARE_AMD_DEV("AMD7411"),
- /* 3 */ DECLARE_AMD_DEV("AMD7441"),
- /* 4 */ DECLARE_AMD_DEV("AMD8111"),
-
- /* 5 */ DECLARE_NV_DEV("NFORCE"),
- /* 6 */ DECLARE_NV_DEV("NFORCE2"),
- /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
- /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
- /* 9 */ DECLARE_NV_DEV("NFORCE3-150"),
- /* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
- /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
- /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
- /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
- /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
- /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
- /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
- /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
- /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
- /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
- /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"),
- /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"),
- /* 22 */ DECLARE_AMD_DEV("AMD5536"),
+ /* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
+ /* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
+ /* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
+ /* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
+ /* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
+
+ /* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
+ /* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
+ /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
+ /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
+ /* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
+ /* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
+ /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
+ /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
+ /* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
+ /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
+ /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
+ /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
+ /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
+ /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
+ /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
+ /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
+ /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
+
+ /* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- amd_chipset = amd74xx_chipsets + id->driver_data;
- amd_config = amd_ide_chips + id->driver_data;
- if (dev->device != amd_config->id) {
- printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n",
- pci_name(dev), dev->device, amd_config->id);
- return -ENODEV;
+ struct ide_port_info d;
+ u8 idx = id->driver_data;
+
+ d = amd74xx_chipsets[idx];
+
+ /*
+ * Check for bad SWDMA and incorrectly wired Serenade mainboards.
+ */
+ if (idx == 1) {
+ if (dev->revision <= 7)
+ d.swdma_mask = 0;
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+ } else if (idx == 4) {
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+ dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+ d.udma_mask = ATA_UDMA5;
}
- return ide_setup_pci_device(dev, amd_chipset);
+
+ printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
+ d.name, pci_name(dev), dev->revision,
+ amd_dma[fls(d.udma_mask) - 1]);
+
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id amd74xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 4918719..b56274a 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/atiixp.c Version 0.05 Nov 9 2007
- *
* Copyright (C) 2003 ATI Inc. <hyu@xxxxxxx>
* Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
*/
@@ -55,7 +53,7 @@ static DEFINE_SPINLOCK(atiixp_lock);
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 pio_timing_data;
@@ -88,7 +86,7 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 tmp32;
@@ -133,9 +131,8 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
- u8 udma_mode = 0;
- u8 ch = hwif->channel;
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ u8 udma_mode = 0, ch = hwif->channel;
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index da3565e..7240c20 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
- *
* Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
*/
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index cd4eb9d..04aa9e5 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cmd64x.c Version 1.53 Dec 24, 2007
- *
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
* on the 646U2 and not on the 646U.
@@ -71,7 +69,7 @@ static u8 quantize_timing(int timing, int quant)
*/
static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int clock_time = 1000 / system_bus_clock();
u8 cycle_count, active_count, recovery_count, drwtim;
static const u8 recovery_values[] =
@@ -118,7 +116,7 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int cycle_time;
u8 setup_count, arttim = 0;
@@ -183,7 +181,7 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
@@ -245,7 +243,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive)
static int cmd64x_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@@ -285,7 +283,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@@ -375,7 +373,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
switch (dev->device) {
@@ -390,7 +388,7 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
@@ -443,7 +441,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 6ec00b8..9e01c6d 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -69,7 +69,7 @@ static struct pio_clocks cs5520_pio_clocks[]={
static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
int controller = drive->dn > 1 ? 1 : 0;
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index df5966b..765aac3 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cs5530.c Version 0.77 Sep 24 2007
- *
* Copyright (C) 2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2000 Mark Lord <mlord@xxxxxxxxx>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 50b3d77..66433aa 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cs5535.c
- *
* Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -177,13 +175,15 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
*/
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
if (hwif->dma_base == 0)
return;
- hwif->cbl = cs5535_cable_detect(hwif->pci_dev);
+ hwif->cbl = cs5535_cable_detect(dev);
}
static const struct ide_port_info cs5535_chipset __devinitdata = {
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 3ec4c65..50100ac 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/cy82c693.c Version 0.44 Nov 8, 2007
- *
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@xxxxxxxxxxxxx), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>, Integrator
*
@@ -228,7 +226,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
pio_clocks_t pclk;
unsigned int addrCtrl;
@@ -397,8 +395,9 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
- if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
+ if (PCI_FUNC(dev->devfn) == 1)
primary = hwif;
else {
hwif->mate = primary;
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 26aa492..27e47fc 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/delkin_cb.c
- *
* Created 20 Oct 2004 by Mark Lord
*
* Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
@@ -87,7 +85,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
pci_set_drvdata(dev, hwif);
- hwif->pci_dev = dev;
+ hwif->dev = &dev->dev;
drive = &hwif->drives[0];
if (drive->present) {
drive->io_32bit = 1;
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 0688569..59ebe84 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/generic.c Version 0.11 December 30, 2002
- *
* Copyright (C) 2001-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Portions (C) Copyright 2002 Red Hat Inc <alan@xxxxxxxxxx>
*
@@ -104,7 +102,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
{ /* 14 */
.name = "Revolution",
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
+ .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
+ IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index dfba0d1..25dbb81 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
- *
* Copyright (C) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
+ *
* May be copied or modified under the terms of the GNU General Public License
*
*
@@ -45,7 +44,7 @@
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
@@ -131,6 +130,7 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_NO_DSC | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_NO_AUTODMA)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 1268593..5623cad 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.30 Dec 12, 2007
- *
* Copyright (C) 1999-2003 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
@@ -626,7 +624,8 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
@@ -665,7 +664,8 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
switch (info->chip_type) {
case HPT372 :
@@ -699,7 +699,7 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
@@ -742,7 +742,7 @@ static void hpt3xx_quirkproc(ide_drive_t *drive)
static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
if (drive->quirk_list) {
@@ -774,7 +774,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
*/
static void hpt366_dma_lost_irq(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
pci_read_config_byte(dev, 0x50, &mcr1);
@@ -790,18 +790,20 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive)
static void hpt370_clear_engine(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
- pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
+ pci_write_config_byte(dev, hwif->select_data, 0x37);
udelay(10);
}
static void hpt370_irq_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_cmd;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
/* get DMA command mode */
@@ -844,10 +846,11 @@ static void hpt370_dma_timeout(ide_drive_t *drive)
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_stat;
- pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
@@ -867,7 +870,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
static int hpt374_ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr = 0, mcr_addr = hwif->select_data;
u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
@@ -942,7 +945,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr_addr = hwif->select_data + 2;
u8 resetmask = hwif->channel ? 0x80 : 0x40;
u8 bsr2 = 0;
@@ -1278,7 +1281,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
@@ -1393,7 +1396,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 masterdma = 0, slavedma = 0;
u8 dma_new = 0, dma_old = 0;
unsigned long flags;
@@ -1413,7 +1416,7 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
local_irq_restore(flags);
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 2a0f45c..df74e58 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -28,7 +28,7 @@
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = 0x40;
int slave_port = 0x44;
@@ -85,7 +85,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@@ -152,6 +152,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
hwif->set_dma_mode = &it8213_set_dma_mode;
@@ -160,7 +161,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
- pci_read_config_byte(hwif->pci_dev, 0x42, ®42h);
+ pci_read_config_byte(dev, 0x42, ®42h);
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index e610a53..938d35f 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -1,7 +1,4 @@
-
/*
- * linux/drivers/ide/pci/it821x.c Version 0.16 Jul 3 2007
- *
* Copyright (C) 2004 Red Hat <alan@xxxxxxxxxx>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -113,7 +110,8 @@ static int it8212_noraid;
static void it821x_program(ide_drive_t *drive, u16 timing)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
u8 conf;
@@ -123,7 +121,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
- pci_write_config_byte(hwif->pci_dev, 0x54 + 4 * channel, conf);
+
+ pci_write_config_byte(dev, 0x54 + 4 * channel, conf);
}
/**
@@ -137,7 +136,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
static void it821x_program_udma(ide_drive_t *drive, u16 timing)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
int unit = drive->select.b.unit;
@@ -148,11 +148,12 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
- if(itdev->timing10 == 0)
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + unit, conf);
+
+ if (itdev->timing10 == 0)
+ pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf);
else {
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel, conf);
- pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + 1, conf);
+ pci_write_config_byte(dev, 0x56 + 4 * channel, conf);
+ pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf);
}
}
@@ -167,6 +168,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
static void it821x_clock_strategy(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
u8 unit = drive->select.b.unit;
@@ -205,10 +207,11 @@ static void it821x_clock_strategy(ide_drive_t *drive)
itdev->clock_mode = ATA_50;
sel = 1;
}
- pci_read_config_byte(hwif->pci_dev, 0x50, &v);
+
+ pci_read_config_byte(dev, 0x50, &v);
v &= ~(1 << (1 + hwif->channel));
v |= sel << (1 + hwif->channel);
- pci_write_config_byte(hwif->pci_dev, 0x50, v);
+ pci_write_config_byte(dev, 0x50, v);
/*
* Reprogram the UDMA/PIO of the pair drive for the switch
@@ -282,7 +285,8 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@@ -297,12 +301,12 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] = UDMA_OFF;
/* UDMA bits off - Revision 0x10 do them in pairs */
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
- if(itdev->timing10)
+ pci_read_config_byte(dev, 0x50, &conf);
+ if (itdev->timing10)
conf |= channel ? 0x60: 0x18;
else
conf |= 1 << (3 + 2 * channel + unit);
- pci_write_config_byte(hwif->pci_dev, 0x50, conf);
+ pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
/* FIXME: do we need to program this ? */
@@ -320,7 +324,8 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@@ -337,12 +342,12 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
/* UDMA on. Again revision 0x10 must do the pair */
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
- if(itdev->timing10)
+ pci_read_config_byte(dev, 0x50, &conf);
+ if (itdev->timing10)
conf &= channel ? 0x9F: 0xE7;
else
conf &= ~ (1 << (3 + 2 * channel + unit));
- pci_write_config_byte(hwif->pci_dev, 0x50, conf);
+ pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
it821x_program_udma(drive, itdev->udma[unit]);
@@ -520,6 +525,7 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL);
u8 conf;
@@ -532,7 +538,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
ide_set_hwifdata(hwif, idev);
- pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
+ pci_read_config_byte(dev, 0x50, &conf);
if (conf & 1) {
idev->smart = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
@@ -555,7 +561,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
* this is necessary.
*/
- pci_read_config_byte(hwif->pci_dev, 0x08, &conf);
+ pci_read_config_byte(dev, 0x08, &conf);
if (conf == 0x10) {
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 0083eaf..8b40f64 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -30,7 +30,7 @@ typedef enum {
static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 control;
u32 control5;
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index d4df464..fc9eee9 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
- *
* Copyright (C) 1997-1998 Mark Lord <mlord@xxxxxxxxx>
* Copyright (C) 1998 Eddie C. Dost <ecd@xxxxxxxxx>
* Copyright (C) 1999-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
@@ -71,10 +69,9 @@ static u8 superio_ide_inb (unsigned long port)
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 base, dmabase;
- u8 tmp;
- struct pci_dev *pdev = hwif->pci_dev;
- u8 port = hwif->channel;
+ u8 port = hwif->channel, tmp;
base = pci_resource_start(pdev, port * 2) & ~3;
dmabase = pci_resource_start(pdev, 4) & ~3;
@@ -93,10 +90,11 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
{
- if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) {
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ if (PCI_SLOT(dev->devfn) == 0xE)
/* Built-in - assume it's under superio. */
superio_ide_init_iops(hwif);
- }
}
#endif
@@ -110,8 +108,8 @@ static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
- struct pci_dev *dev = hwif->pci_dev;
unsigned long flags;
local_irq_save(flags);
@@ -189,7 +187,7 @@ static int ns87415_ide_dma_setup(ide_drive_t *drive)
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int ctrl, using_inta;
u8 progif;
#ifdef __sparc_v9__
@@ -231,8 +229,8 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
#ifdef __sparc_v9__
/*
- * XXX: Reset the device, if we don't it will not respond
- * to SELECT_DRIVE() properly during first probe_hwif().
+ * XXX: Reset the device, if we don't it will not respond to
+ * SELECT_DRIVE() properly during first ide_probe_port().
*/
timeout = 10000;
outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 8953d9c..0ce92d3 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/opti621.c Version 0.9 Sep 24, 2007
- *
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 89d2363..bb29db0 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -149,6 +149,7 @@ static struct udma_timing {
static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
/*
@@ -159,7 +160,7 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
* As we set up the PLL to output 133 MHz for UltraDMA/133 capable
* chips, we must override the default register settings...
*/
- if (max_dma_rate(hwif->pci_dev) == 4) {
+ if (max_dma_rate(dev) == 4) {
u8 mode = speed & 0x07;
if (speed >= XFER_UDMA_0) {
@@ -186,9 +187,10 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
- if (max_dma_rate(hwif->pci_dev) == 4) {
+ if (max_dma_rate(dev) == 4) {
set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 3a1e081..31a1308 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/pdc202xx_old.c Version 0.52 Aug 27, 2007
- *
* Copyright (C) 1998-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2006-2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@@ -66,7 +64,7 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 AP = 0, BP = 0, CP = 0;
@@ -144,9 +142,10 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
- pci_read_config_word(hwif->pci_dev, 0x50, &CIS);
+ pci_read_config_word(dev, 0x50, &CIS);
return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
@@ -305,12 +304,14 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->set_pio_mode = &pdc202xx_set_pio_mode;
hwif->set_dma_mode = &pdc202xx_set_mode;
hwif->quirkproc = &pdc202xx_quirkproc;
- if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
hwif->resetproc = &pdc202xx_reset;
if (hwif->dma_base == 0)
@@ -319,7 +320,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->dma_lost_irq = &pdc202xx_dma_lost_irq;
hwif->dma_timeout = &pdc202xx_dma_timeout;
- if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) {
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = pdc202xx_old_cable_detect(hwif);
@@ -334,7 +335,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
if (hwif->channel) {
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
return;
}
@@ -358,7 +359,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
}
#endif /* CONFIG_PDC202XX_BURST */
- ide_setup_dma(hwif, dmabase, 8);
+ ide_setup_dma(hwif, dmabase);
}
static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index bd6d3f7..c1a6b68 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/piix.c Version 0.54 Sep 5, 2007
- *
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2003 Red Hat Inc <alan@xxxxxxxxxx>
@@ -8,53 +6,8 @@
*
* May be copied or modified under the terms of the GNU General Public License
*
- * PIO mode setting function for Intel chipsets.
- * For use instead of BIOS settings.
- *
- * 40-41
- * 42-43
- *
- * 41
- * 43
- *
- * | PIO 0 | c0 | 80 | 0 |
- * | PIO 2 | SW2 | d0 | 90 | 4 |
- * | PIO 3 | MW1 | e1 | a1 | 9 |
- * | PIO 4 | MW2 | e3 | a3 | b |
- *
- * sitre = word40 & 0x4000; primary
- * sitre = word42 & 0x4000; secondary
- *
- * 44 8421|8421 hdd|hdb
- *
- * 48 8421 hdd|hdc|hdb|hda udma enabled
- *
- * 0001 hda
- * 0010 hdb
- * 0100 hdc
- * 1000 hdd
- *
- * 4a 84|21 hdb|hda
- * 4b 84|21 hdd|hdc
- *
- * ata-33/82371AB
- * ata-33/82371EB
- * ata-33/82801AB ata-66/82801AA
- * 00|00 udma 0 00|00 reserved
- * 01|01 udma 1 01|01 udma 3
- * 10|10 udma 2 10|10 udma 4
- * 11|11 reserved 11|11 reserved
- *
- * 54 8421|8421 ata66 drive|ata66 enable
- *
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, ®40);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, ®42);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, ®44);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, ®48);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, ®4a);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, ®54);
+ * Documentation:
*
- * Documentation
* Publically available from Intel web site. Errata documentation
* is also publically available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below.going back to
@@ -116,7 +69,7 @@ static int no_piix_dma;
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@@ -185,7 +138,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@@ -305,7 +258,7 @@ static const struct ich_laptop ich_laptop[] = {
static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct ich_laptop *lap = &ich_laptop[0];
u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 6b10ae2..7ed6625 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
- *
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
*/
@@ -32,8 +30,8 @@
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 reg;
- struct pci_dev *dev = hwif->pci_dev;
if (!pci_read_config_word (dev, 0x40, ®) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 32fdf53..af499a6 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.97 Aug 3 2007
- *
* Copyright (C) 2000-2002 Mark Lord <mlord@xxxxxxxxx>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@@ -87,7 +85,7 @@ static const unsigned int sc1200_pio_timings[4][5] =
static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
pci_read_config_dword(pdev, basereg + 4, &format);
@@ -130,6 +128,7 @@ out:
static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int unit = drive->select.b.unit;
unsigned int reg, timings;
unsigned short pci_clock;
@@ -160,12 +159,11 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
if (unit == 0) { /* are we configuring drive0? */
- pci_read_config_dword(hwif->pci_dev, basereg+4, ®);
+ pci_read_config_dword(dev, basereg + 4, ®);
timings |= reg & 0x80000000; /* preserve PIO format bit */
- pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
- } else {
- pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
- }
+ pci_write_config_dword(dev, basereg + 4, timings);
+ } else
+ pci_write_config_dword(dev, basereg + 12, timings);
}
/* Replacement for the standard ide_dma_end action in
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 24a85bb..7694969 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -594,7 +594,7 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
struct scc_ports *ports = pci_get_drvdata(dev);
unsigned long dma_base = ports->dma;
@@ -620,7 +620,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
- hwif->irq = hwif->pci_dev->irq;
+ hwif->irq = dev->irq;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
hwif->mmio = 1;
@@ -636,7 +636,8 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
static void __devinit init_iops_scc(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->hwif_data = NULL;
if (pci_get_drvdata(dev) == NULL)
return;
@@ -726,10 +727,8 @@ static void __devexit scc_remove(struct pci_dev *dev)
unsigned long dma_size = pci_resource_len(dev, 1);
if (hwif->dmatable_cpu) {
- pci_free_consistent(hwif->pci_dev,
- PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu,
- hwif->dmatable_dma);
+ pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 877c09b..f495253 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007
- *
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
* Copyright (C) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
@@ -67,7 +65,7 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
static u8 svwks_udma_filter(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mask = 0;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
@@ -130,7 +128,7 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
@@ -153,7 +151,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
@@ -287,7 +285,8 @@ static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
@@ -305,7 +304,8 @@ static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
@@ -316,7 +316,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Server Works */
if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
@@ -340,6 +340,8 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
@@ -347,7 +349,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
- if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
+ if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_svwks(hwif);
}
@@ -418,7 +420,9 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
d = serverworks_chipsets[idx];
- if (idx == 2 || idx == 3) {
+ if (idx == 1)
+ d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+ else if (idx == 2 || idx == 3) {
if ((PCI_FUNC(dev->devfn) & 1) == 0) {
if (pci_resource_start(dev, 0) != 0x01f1)
d.host_flags &= ~IDE_HFLAG_BOOTABLE;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 9e0be7d..8590207 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -159,6 +159,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
}
if (intr_reg & 0x02) {
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Error when transferring DMA data on PCI bus */
u32 pci_err_addr_low, pci_err_addr_high,
pci_stat_cmd_reg;
@@ -167,7 +168,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
pci_err_addr_high =
readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
- pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
+ pci_read_config_dword(dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Bus Error when doing DMA:"
@@ -178,8 +179,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
__FUNCTION__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
- pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
- 0x00000146);
+ pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
}
/* Clear the Interrupt, Error bits on the IOC4 */
@@ -334,6 +334,7 @@ sgiioc4_INB(unsigned long port)
static int __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
void __iomem *virt_dma_base;
int num_ports = sizeof (ioc4_dma_regs_t);
void *pad;
@@ -359,7 +360,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
}
hwif->dma_base = (unsigned long) virt_dma_base;
- hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
+ hwif->dmatable_cpu = pci_alloc_consistent(dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
&hwif->dmatable_dma);
@@ -368,7 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
- pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE,
+ pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *) &(hwif->dma_status));
if (pad) {
@@ -376,8 +377,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
return 0;
}
- pci_free_consistent(hwif->pci_dev,
- IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
+ pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
printk(KERN_INFO
"%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
@@ -517,8 +517,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
}
use_pio_instead:
- pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
- hwif->sg_dma_direction);
+ ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@@ -641,7 +640,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
hw.dev = &dev->dev;
ide_init_port_hw(hwif, &hw);
- hwif->pci_dev = dev;
+ hwif->dev = &dev->dev;
hwif->channel = 0; /* Single Channel chip */
/* The IOC4 uses MMIO rather than Port IO. */
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 908f37b..4877bc8 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
- *
* Copyright (C) 2001-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
* Copyright (C) 2007 MontaVista Software, Inc.
@@ -79,7 +77,7 @@ static int pdev_is_sata(struct pci_dev *pdev)
static inline int is_sata(ide_hwif_t *hwif)
{
- return pdev_is_sata(hwif->pci_dev);
+ return pdev_is_sata(to_pci_dev(hwif->dev));
}
/**
@@ -140,13 +138,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
static u8 sil_pata_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = (unsigned long) hwif->hwif_data;
u8 mask = 0, scsc = 0;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
- pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
+ pci_read_config_byte(dev, 0x8A, &scsc);
if ((scsc & 0x30) == 0x10) /* 133 */
mask = ATA_UDMA6;
@@ -219,19 +218,21 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
mode |= (unit ? 0x10 : 0x01);
hwif->OUTB(mode, base + addr_mask);
} else {
- pci_write_config_word(hwif->pci_dev, addr, speedp);
- pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
- pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ pci_write_config_word(dev, addr, speedp);
+ pci_write_config_word(dev, tfaddr, speedt);
+ pci_read_config_word(dev, tfaddr - 2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if (pio > 2)
speedp |= 0x200;
- pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
+ pci_write_config_word(dev, tfaddr - 2, speedp);
- pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
+ pci_read_config_byte(dev, addr_mask, &mode);
mode &= ~(unit ? 0x30 : 0x03);
mode |= (unit ? 0x10 : 0x01);
- pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
+ pci_write_config_byte(dev, addr_mask, mode);
}
}
@@ -250,6 +251,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
@@ -266,10 +268,10 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
- pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
- pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
- pci_read_config_word(hwif->pci_dev, ma, &multi);
- pci_read_config_word(hwif->pci_dev, ua, &ultra);
+ pci_read_config_byte(dev, 0x8A, &scsc);
+ pci_read_config_byte(dev, addr_mask, &mode);
+ pci_read_config_word(dev, ma, &multi);
+ pci_read_config_word(dev, ua, &ultra);
}
mode &= ~((unit) ? 0x30 : 0x03);
@@ -293,9 +295,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
- pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
- pci_write_config_word(hwif->pci_dev, ma, multi);
- pci_write_config_word(hwif->pci_dev, ua, ultra);
+ pci_write_config_byte(dev, addr_mask, mode);
+ pci_write_config_word(dev, ma, multi);
+ pci_write_config_word(dev, ua, ultra);
}
}
@@ -303,6 +305,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 dma_altstat = 0;
unsigned long addr = siimage_selreg(hwif, 1);
@@ -311,7 +314,7 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
return 1;
/* return 1 if Device INTR asserted */
- pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat);
+ pci_read_config_byte(dev, addr, &dma_altstat);
if (dma_altstat & 8)
return 0; //return 1;
return 0;
@@ -377,13 +380,14 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
static int sil_sata_busproc(ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio)
stat_config = readl((void __iomem *)addr);
else
- pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
+ pci_read_config_dword(dev, addr, &stat_config);
switch (state) {
case BUSSTATE_ON:
@@ -643,7 +647,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
hw_regs_t hw;
@@ -756,12 +760,14 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
static void __devinit init_iops_siimage(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
hwif->hwif_data = NULL;
/* Pessimal until we finish probing */
hwif->rqsize = 15;
- if (pci_get_drvdata(hwif->pci_dev) == NULL)
+ if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
@@ -777,11 +783,12 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
u8 ata66 = 0;
- if (pci_get_drvdata(hwif->pci_dev) == NULL)
- pci_read_config_byte(hwif->pci_dev, addr, &ata66);
+ if (pci_get_drvdata(dev) == NULL)
+ pci_read_config_byte(dev, addr, &ata66);
else
ata66 = hwif->INB(addr);
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 85d3699..2a461de 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sis5513.c Version 0.31 Aug 9, 2007
- *
* Copyright (C) 1999-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@xxxxxxxx>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@xxxxxxx>
@@ -197,7 +195,7 @@ static char* chipset_capability[] = {
static u8 sis_ata133_get_base(ide_drive_t *drive)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg54 = 0;
pci_read_config_dword(dev, 0x54, ®54);
@@ -207,7 +205,7 @@ static u8 sis_ata133_get_base(ide_drive_t *drive)
static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u16 t1 = 0;
u8 drive_pci = 0x40 + drive->dn * 2;
@@ -230,7 +228,7 @@ static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 t1, drive_pci = 0x40 + drive->dn * 2;
/* timing bits: 7:4 active 3:0 recovery */
@@ -253,7 +251,7 @@ static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 t1 = 0;
u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
@@ -286,7 +284,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode)
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg4bh = 0;
u8 rw_prefetch = 0;
@@ -307,7 +305,7 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
@@ -326,7 +324,7 @@ static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
pci_read_config_byte(dev, drive_pci + 1, ®);
@@ -359,7 +357,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
{
- struct pci_dev *dev = drive->hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
u8 drive_pci = sis_ata133_get_base(drive);
@@ -530,7 +528,7 @@ static const struct sis_laptop sis_laptop[] = {
static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct sis_laptop *lap = &sis_laptop[0];
u8 ata66 = 0;
@@ -545,12 +543,12 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
if (chipset_family >= ATA_133) {
u16 regw = 0;
u16 reg_addr = hwif->channel ? 0x52: 0x50;
- pci_read_config_word(hwif->pci_dev, reg_addr, ®w);
+ pci_read_config_word(pdev, reg_addr, ®w);
ata66 = (regw & 0x8000) ? 0 : 1;
} else if (chipset_family >= ATA_66) {
u8 reg48h = 0;
u8 mask = hwif->channel ? 0x20 : 0x10;
- pci_read_config_byte(hwif->pci_dev, 0x48, ®48h);
+ pci_read_config_byte(pdev, 0x48, ®48h);
ata66 = (reg48h & mask) ? 0 : 1;
}
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index c7a125b..da13a12 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/sl82c105.c
- *
* SL82C105/Winbond 553 IDE driver
*
* Maintainer unknown.
@@ -78,7 +76,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
*/
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
@@ -147,7 +145,7 @@ static inline void sl82c105_reset_host(struct pci_dev *dev)
static void sl82c105_dma_lost_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
u8 dma_cmd;
@@ -184,7 +182,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
static void sl82c105_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
@@ -197,15 +195,17 @@ static void sl82c105_dma_start(ide_drive_t *drive)
static void sl82c105_dma_timeout(ide_drive_t *drive)
{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+
DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
- sl82c105_reset_host(HWIF(drive)->pci_dev);
+ sl82c105_reset_host(dev);
ide_dma_timeout(drive);
}
static int sl82c105_dma_end(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
int ret;
@@ -224,7 +224,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
@@ -293,6 +293,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
*/
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int rev;
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
@@ -304,7 +305,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
- rev = sl82c105_bridge_revision(hwif->pci_dev);
+ rev = sl82c105_bridge_revision(dev);
if (rev <= 5) {
/*
* Never ever EVER under any circumstances enable
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index dbbb468..a6cf810 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.19 Sep 24, 2007
- *
* Copyright (C) 2000-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@xxxxxxxxxx>
*
@@ -26,7 +24,7 @@ static DEFINE_SPINLOCK(slc90e66_lock);
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@@ -79,7 +77,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
@@ -122,13 +120,14 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg47 = 0;
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
- pci_read_config_byte(hwif->pci_dev, 0x47, ®47);
+ pci_read_config_byte(dev, 0x47, ®47);
if (hwif->dma_base == 0)
return;
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index e1faf6c..9fbbb4f 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -1,6 +1,4 @@
/*
- * drivers/ide/pci/tc86c001.c Version 1.01 Sep 5, 2007
- *
* Copyright (C) 2002 Toshiba Corporation
* Copyright (C) 2005-2006 MontaVista Software, Inc. <source@xxxxxxxxxx>
*
@@ -164,7 +162,8 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
{
- unsigned long sc_base = pci_resource_start(hwif->pci_dev, 5);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
u16 scr1 = inw(sc_base + 0x00);
/* System Control 1 Register bit 15 (Soft Reset) set */
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index ae52a96..852b726 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -1,6 +1,4 @@
/*
- * triflex.c
- *
* IDE Chipset driver for the Compaq TriFlex IDE controller.
*
* Known to work with the Compaq Workstation 5x00 series.
@@ -43,7 +41,7 @@
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 channel_offset = hwif->channel ? 0x74 : 0x70;
u16 timing = 0;
u32 triflex_timings = 0;
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 04cd893..d9ebb69 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -1,8 +1,7 @@
/*
- * linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 26, 2007
- *
* Copyright (c) 1997-1998 Mark Lord
* Copyright (c) 2007 MontaVista Software, Inc. <source@xxxxxxxxxx>
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* June 22, 2004 - get rid of check_region
@@ -209,10 +208,10 @@ static int trm290_dma_setup(ide_drive_t *drive)
}
/* select DMA xfer */
trm290_prepare_drive(drive, 1);
- outl(hwif->dmatable_dma | rw, hwif->dma_command);
+ outl(hwif->dmatable_dma | rw, hwif->dma_base);
drive->waiting_for_dma = 1;
/* start DMA */
- outw((count * 2) - 1, hwif->dma_status);
+ outw(count * 2 - 1, hwif->dma_base + 2);
return 0;
}
@@ -222,23 +221,21 @@ static void trm290_dma_start(ide_drive_t *drive)
static int trm290_ide_dma_end (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
drive->waiting_for_dma = 0;
/* purge DMA mappings */
ide_destroy_dmatable(drive);
- status = inw(hwif->dma_status);
- return (status != 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status != 0x00ff;
}
static int trm290_ide_dma_test_irq (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
- status = inw(hwif->dma_status);
- return (status == 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status == 0x00ff;
}
static void trm290_dma_host_set(ide_drive_t *drive, int on)
@@ -247,21 +244,37 @@ static void trm290_dma_host_set(ide_drive_t *drive, int on)
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
- unsigned int cfgbase = 0;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned int cfg_base = pci_resource_start(dev, 4);
unsigned long flags;
u8 reg = 0;
- struct pci_dev *dev = hwif->pci_dev;
-
- cfgbase = pci_resource_start(dev, 4);
- if ((dev->class & 5) && cfgbase) {
- hwif->config_data = cfgbase;
- printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n",
- hwif->config_data);
- } else {
- hwif->config_data = 0x3df0;
- printk(KERN_INFO "TRM290: using default config base at 0x%04lx\n",
- hwif->config_data);
+
+ if ((dev->class & 5) && cfg_base)
+ printk(KERN_INFO "TRM290: chip");
+ else {
+ cfg_base = 0x3df0;
+ printk(KERN_INFO "TRM290: using default");
}
+ printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
+ hwif->config_data = cfg_base;
+ hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
+
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
+ hwif->name, hwif->dma_base, hwif->dma_base + 3);
+
+ if (!request_region(hwif->dma_base, 4, hwif->name)) {
+ printk(KERN_CONT " -- Error, ports in use.\n");
+ return;
+ }
+
+ hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES,
+ &hwif->dmatable_dma);
+ if (!hwif->dmatable_cpu) {
+ printk(KERN_CONT " -- Error, unable to allocate DMA table.\n");
+ release_region(hwif->dma_base, 4);
+ return;
+ }
+ printk(KERN_CONT "\n");
local_irq_save(flags);
/* put config reg into first byte of hwif->select_data */
@@ -276,15 +289,13 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
outb(reg, hwif->config_data + 3);
local_irq_restore(flags);
- if ((reg & 0x10))
+ if (reg & 0x10)
/* legacy mode */
hwif->irq = hwif->channel ? 15 : 14;
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
/* sharing IRQ with mate */
hwif->irq = hwif->mate->irq;
- ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
-
hwif->dma_host_set = &trm290_dma_host_set;
hwif->dma_setup = &trm290_dma_setup;
hwif->dma_exec_cmd = &trm290_dma_exec_cmd;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 4b32c90..24cb904 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,7 +1,4 @@
/*
- *
- * Version 3.50
- *
* VIA IDE driver for Linux. Supported southbridges:
*
* vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
@@ -121,8 +118,8 @@ struct via82cxxx_dev
static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
{
- struct pci_dev *dev = hwif->pci_dev;
- struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
u8 t;
if (~vdev->via_config->flags & VIA_BAD_AST) {
@@ -159,8 +156,10 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
static void via_set_drive(ide_drive_t *drive, const u8 speed)
{
- ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
- struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
struct ide_timing t, p;
unsigned int T, UT;
@@ -408,7 +407,7 @@ static int via_cable_override(struct pci_dev *pdev)
static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = hwif->pci_dev;
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
struct via82cxxx_dev *vdev = pci_get_drvdata(pdev);
if (via_cable_override(pdev))
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 3fd5d45..45c1d55 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ppc/ide-m8xx.c
- *
* Copyright (C) 2000, 2001 Wolfgang Denk, wd@xxxxxxx
* Modified for direct IDE interface
* by Thomas Lange, thomas@xxxxxxxxxxxxx
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 736d12c..23112ef 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/ide/ppc/pmac.c
- *
* Support for IDE interfaces on PowerMacs.
+ *
* These IDE interfaces are memory-mapped and have a DBDMA channel
* for doing DMA.
*
@@ -1011,7 +1010,7 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
* (it is kept in 2.4). This introduce an interface numbering change on some
* rare machines unfortunately, but it's better this way.
*/
-static int
+static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
{
struct device_node *np = pmif->node;
@@ -1200,7 +1199,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
base = ioremap(macio_resource_start(mdev, 0), 0x400);
regbase = (unsigned long) base;
- hwif->pci_dev = mdev->bus->pdev;
+ hwif->dev = &mdev->bus->pdev->dev;
pmif->mdev = mdev;
pmif->node = mdev->ofdev.node;
@@ -1228,12 +1227,12 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
/* The inteface is released to the common IDE layer */
dev_set_drvdata(&mdev->ofdev.dev, NULL);
iounmap(base);
- if (pmif->dma_regs)
+ if (pmif->dma_regs) {
iounmap(pmif->dma_regs);
+ macio_release_resource(mdev, 1);
+ }
memset(pmif, 0, sizeof(*pmif));
macio_release_resource(mdev, 0);
- if (pmif->dma_regs)
- macio_release_resource(mdev, 1);
}
return rc;
@@ -1315,7 +1314,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENXIO;
}
- hwif->pci_dev = pdev;
+ hwif->dev = &pdev->dev;
pmif->mdev = NULL;
pmif->node = np;
@@ -1535,11 +1534,10 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
}
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
- use_pio_instead:
- pci_unmap_sg(hwif->pci_dev,
- hwif->sg_table,
- hwif->sg_nents,
- hwif->sg_dma_direction);
+
+use_pio_instead:
+ ide_destroy_dmatable(drive);
+
return 0; /* revert to PIO for this request */
}
@@ -1548,12 +1546,9 @@ static void
pmac_ide_destroy_dmatable (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- struct scatterlist *sg = hwif->sg_table;
- int nents = hwif->sg_nents;
- if (nents) {
- pci_unmap_sg(dev, sg, nents, hwif->sg_dma_direction);
+ if (hwif->sg_nents) {
+ ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
}
@@ -1726,13 +1721,15 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static void __init
+static void __devinit
pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
/* We won't need pci_dev if we switch to generic consistent
* DMA routines ...
*/
- if (hwif->pci_dev == NULL)
+ if (dev == NULL)
return;
/*
* Allocate space for the DBDMA commands.
@@ -1740,7 +1737,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
* aligning the start address to a multiple of 16 bytes.
*/
pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
- hwif->pci_dev,
+ dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
if (pmif->dma_table_cpu == NULL) {
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 676c66e..8ff5a0e 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -1,9 +1,8 @@
/*
- * linux/drivers/ide/setup-pci.c Version 1.10 2002/08/19
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
+ * Copyright (C) 1995-1998 Mark Lord
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
- * Copyright (c) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
- *
- * Copyright (c) 1995-1998 Mark Lord
* May be copied or modified under the terms of the GNU General Public License
*/
@@ -140,6 +139,16 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+{
+ u8 dma_stat = inb(dma_base + 2);
+
+ outb(dma_stat & 0x60, dma_base + 2);
+ dma_stat = inb(dma_base + 2);
+ if (dma_stat & 0x80)
+ printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+}
+
/**
* ide_get_or_set_dma_base - setup BMIBA
* @d: IDE port info
@@ -152,8 +161,9 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif)
{
- unsigned long dma_base = 0;
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long dma_base = 0;
+ u8 dma_stat = 0;
if (hwif->mmio)
return hwif->dma_base;
@@ -174,52 +184,30 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
if (hwif->channel)
dma_base += 8;
- if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
- u8 simplex_stat = 0;
-
- switch(dev->device) {
- case PCI_DEVICE_ID_AL_M5219:
- case PCI_DEVICE_ID_AL_M5229:
- case PCI_DEVICE_ID_AMD_VIPER_7409:
- case PCI_DEVICE_ID_CMD_643:
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- case PCI_DEVICE_ID_REVOLUTION:
- simplex_stat = inb(dma_base + 2);
- outb(simplex_stat & 0x60, dma_base + 2);
- simplex_stat = inb(dma_base + 2);
- if (simplex_stat & 0x80) {
- printk(KERN_INFO "%s: simplex device: "
- "DMA forced\n",
- d->name);
- }
- break;
- default:
- /*
- * If the device claims "simplex" DMA,
- * this means only one of the two interfaces
- * can be trusted with DMA at any point in time.
- * So we should enable DMA only on one of the
- * two interfaces.
- */
- simplex_stat = hwif->INB(dma_base + 2);
- if (simplex_stat & 0x80) {
- /* simplex device? */
-/*
- * At this point we haven't probed the drives so we can't make the
- * appropriate decision. Really we should defer this problem
- * until we tune the drive then try to grab DMA ownership if we want
- * to be the DMA end. This has to be become dynamic to handle hot
- * plug.
- */
- if (hwif->mate && hwif->mate->dma_base) {
- printk(KERN_INFO "%s: simplex device: "
- "DMA disabled\n",
- d->name);
- dma_base = 0;
- }
- }
- }
+ if (d->host_flags & IDE_HFLAG_CS5520)
+ goto out;
+
+ if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
+ ide_pci_clear_simplex(dma_base, d->name);
+ goto out;
+ }
+
+ /*
+ * If the device claims "simplex" DMA, this means that only one of
+ * the two interfaces can be trusted with DMA at any point in time
+ * (so we should enable DMA only on one of the two interfaces).
+ *
+ * FIXME: At this point we haven't probed the drives so we can't make
+ * the appropriate decision. Really we should defer this problem until
+ * we tune the drive then try to grab DMA ownership if we want to be
+ * the DMA end. This has to be become dynamic to handle hot-plug.
+ */
+ dma_stat = hwif->INB(dma_base + 2);
+ if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
+ printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+ dma_base = 0;
}
+out:
return dma_base;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
@@ -402,7 +390,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port
hwif->noprobe = oldnoprobe;
- hwif->pci_dev = dev;
+ hwif->dev = &dev->dev;
hwif->cds = d;
hwif->channel = port;
@@ -451,7 +439,7 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *
if (d->init_dma) {
d->init_dma(hwif, dma_base);
} else {
- ide_setup_dma(hwif, dma_base, 8);
+ ide_setup_dma(hwif, dma_base);
}
} else {
printk(KERN_INFO "%s: %s Bus-Master DMA disabled "
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index db8bc20..5ed0006 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -1,7 +1,6 @@
/*
- * linux/drivers/scsi/ide-scsi.c Version 0.9 Jul 4, 1999
- *
- * Copyright (C) 1996 - 1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * Copyright (C) 1996-1999 Gadi Oxman <gadio@xxxxxxxxxxxxxxxx>
+ * Copyright (C) 2004-2005 Bartlomiej Zolnierkiewicz
*/
/*
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
index aef0edb..e4fe26c 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_ide.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -74,7 +74,6 @@ typedef struct
struct dbdma_cmd *dma_table_cpu;
dma_addr_t dma_table_dma;
#endif
- struct device *dev;
int irq;
u32 regbase;
#ifdef CONFIG_PM
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index fcdc11b..a5cd204 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -1187,6 +1187,20 @@ struct media_event_desc {
extern int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med);
+static inline void lba_to_msf(int lba, u8 *m, u8 *s, u8 *f)
+{
+ lba += CD_MSF_OFFSET;
+ lba &= 0xffffff; /* negative lbas use only 24 bits */
+ *m = lba / (CD_SECS * CD_FRAMES);
+ lba %= (CD_SECS * CD_FRAMES);
+ *s = lba / CD_FRAMES;
+ *f = lba % CD_FRAMES;
+}
+
+static inline int msf_to_lba(u8 m, u8 s, u8 f)
+{
+ return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+}
#endif /* End of kernel only stuff */
#endif /* _LINUX_CDROM_H */
diff --git a/include/linux/hdsmart.h b/include/linux/hdsmart.h
index 7974a47..e691921 100644
--- a/include/linux/hdsmart.h
+++ b/include/linux/hdsmart.h
@@ -17,6 +17,7 @@
#ifndef _LINUX_HDSMART_H
#define _LINUX_HDSMART_H
+#ifndef __KERNEL
#define OFFLINE_FULL_SCAN 0
#define SHORT_SELF_TEST 1
#define EXTEND_SELF_TEST 2
@@ -120,5 +121,6 @@ typedef struct ata_smart_selftestlog_s {
unsigned char resevered[2];
unsigned char chksum;
} __attribute__ ((packed)) ata_smart_selftestlog_t;
+#endif /* __KERNEL__ *
#endif /* _LINUX_HDSMART_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 27cb39d..ec10b2a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -9,7 +9,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/hdreg.h>
-#include <linux/hdsmart.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/interrupt.h>
@@ -503,7 +502,8 @@ typedef struct hwif_s {
hwif_chipset_t chipset; /* sub-module for tuning.. */
- struct pci_dev *pci_dev; /* for pci chipsets */
+ struct device *dev;
+
const struct ide_port_info *cds; /* chipset device struct */
ide_ack_intr_t *ack_intr;
@@ -628,8 +628,7 @@ typedef int (ide_expiry_t)(ide_drive_t *);
typedef struct hwgroup_s {
/* irq handler, if active */
ide_startstop_t (*handler)(ide_drive_t *);
- /* irq handler, suspended if active */
- ide_startstop_t (*handler_save)(ide_drive_t *);
+
/* BOOL: protects all fields below */
volatile int busy;
/* BOOL: wake us up on timer expiry */
@@ -644,25 +643,18 @@ typedef struct hwgroup_s {
/* ptr to current hwif in linked-list */
ide_hwif_t *hwif;
- /* for pci chipsets */
- struct pci_dev *pci_dev;
-
/* current request */
struct request *rq;
+
/* failsafe timer */
struct timer_list timer;
- /* local copy of current write rq */
- struct request wrq;
/* timeout value during long polls */
unsigned long poll_timeout;
/* queried upon timeouts */
int (*expiry)(ide_drive_t *);
- /* ide_system_bus_speed */
- int pio_clock;
+
int req_gen;
int req_gen_timer;
-
- unsigned char cmd_buf[4];
} ide_hwgroup_t;
typedef struct ide_driver_s ide_driver_t;
@@ -986,8 +978,6 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);
-u8 wait_drive_not_busy(ide_drive_t *);
-
int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
@@ -1017,7 +1007,6 @@ void ide_init_disk(struct gendisk *, ide_drive_t *);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
extern int ide_scan_direction;
-int __init ide_scan_pcibus(void);
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
#else
@@ -1096,6 +1085,10 @@ enum {
IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26),
/* host is CY82C693 */
IDE_HFLAG_CY82C693 = (1 << 27),
+ /* force host out of "simplex" mode */
+ IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
+ /* DSC overlap is unsupported */
+ IDE_HFLAG_NO_DSC = (1 << 29),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
@@ -1153,12 +1146,13 @@ void ide_dma_on(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
+int ide_build_sglist(ide_drive_t *, struct request *);
+void ide_destroy_dmatable(ide_drive_t *);
+
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-extern int ide_build_sglist(ide_drive_t *, struct request *);
extern int ide_build_dmatable(ide_drive_t *, struct request *);
-extern void ide_destroy_dmatable(ide_drive_t *);
extern int ide_release_dma(ide_hwif_t *);
-extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
+extern void ide_setup_dma(ide_hwif_t *, unsigned long);
void ide_dma_host_set(ide_drive_t *, int);
extern int ide_dma_setup(ide_drive_t *);
@@ -1197,6 +1191,7 @@ static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
#endif
+void ide_remove_port_from_hwgroup(ide_hwif_t *);
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
extern void ide_unregister (unsigned int index);
@@ -1291,9 +1286,14 @@ extern struct bus_type ide_bus_type;
#define ide_id_has_flush_cache_ext(id) \
(((id)->cfs_enable_2 & 0x2400) == 0x2400)
+static inline void ide_dump_identify(u8 *id)
+{
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
+}
+
static inline int hwif_to_node(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
return dev ? pcibus_to_node(dev->bus) : -1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/