Re: PCI: Remove users of pci_enable_device_bars()

[Greg KH]

On Sat, Feb 02, 2008 at 09:01:10PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Saturday 02 February 2008, Jeff Garzik wrote:
> > Linux Kernel Mailing List wrote:
> > > Commit:     0948391641918b95d8d96c15089eb5ac156850b3
> > 
> > >     PCI: Remove users of pci_enable_device_bars()
> > >     
> > >     This patch converts users of pci_enable_device_bars() to the new
> > >     pci_enable_device_{io,mem} interface.
> > >     
> > >     The new API fits nicely, except maybe for the QLA case where a bit of
> > >     code re-organization might be a good idea but I prefer sticking to the
> > >     simple patch as I don't have hardware to test on.
> > >     
> > >     I'll also need some feedback on the cs5520 change.
> > >     
> > >     Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> > >     Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
> > 
> > > --- a/drivers/ata/pata_cs5520.c
> > > +++ b/drivers/ata/pata_cs5520.c
> > > @@ -229,7 +229,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
> > >  		return -ENOMEM;
> > >  
> > >  	/* Perform set up for DMA */
> > > -	if (pci_enable_device_bars(pdev, 1<<2)) {
> > > +	if (pci_enable_device_io(pdev)) {
> > >  		printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
> > >  		return -ENODEV;
> > >  	}
> > > diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
> > > index 6ec00b8..10adc49 100644
> > > --- a/drivers/ide/pci/cs5520.c
> > > +++ b/drivers/ide/pci/cs5520.c
> > > @@ -156,8 +156,14 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
> > >  	ide_setup_pci_noise(dev, d);
> > >  
> > >  	/* We must not grab the entire device, it has 'ISA' space in its
> > > -	   BARS too and we will freak out other bits of the kernel */
> > > -	if (pci_enable_device_bars(dev, 1<<2)) {
> > > +	 * BARS too and we will freak out other bits of the kernel
> > > +	 *
> > > +	 * pci_enable_device_bars() is going away. I replaced it with
> > > +	 * IO only enable for now but I'll need confirmation this is
> > > +	 * allright for that device. If not, it will need some kind of
> > > +	 * quirk. --BenH.
> > > +	 */
> > > +	if (pci_enable_device_io(dev)) {
> > >  		printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
> > >  		return -ENODEV;
> > >  	}
> > 
> > So...  did the feedback mentioned in the commit log ever appear?  :)
> 
> Since Alan has commented on it:
> 
> http://lkml.org/lkml/2007/12/17/422
> 
> "5520 in fact is always enabled as it is the host bridge.
> pci_enable_device_io will do just fine. The 5520 fun is if you disable it
> the system hangs."
> 
> I moved on assuming that either submitter or integrator would follow up...
> but it seems that it didn't happen. :(
> 
> PS Could somebody remove the stale comment from cs5520.c?

Ben, care to send me a patch for this, as it's your change?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/