Re: Hot (un)plugging of a SATA drive with sata_nv (CK8S)?

[Ignacy Gawedzki]

On Mon, Jan 28, 2008 at 05:35:58PM -0600, thus spake Robert Hancock:
> Any ideas guys? When the drive is plugged in, a stream of this shows up. It 
> would seem like the controller is throwing hotplug interrupts but we never 
> seem to get a "SATA link up". This is on nForce3, btw.

I just happened to upgrade to kernel 2.6.24 and the problem is gone.  I just
have a few SError messages that appear to be harmless:

  ata2: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xa frozen
  ata2: SError: { PHYRdyChg CommWake }
  ata2: hard resetting link
  ata2: SATA link down (SStatus 0 SControl 300)
  ata2: EH complete
  ata2: exception Emask 0x10 SAct 0x0 SErr 0x1d0000 action 0xa frozen
  ata2: SError: { PHYRdyChg CommWake 10B8B Dispar }
  ata2: hard resetting link
  ata2: port is slow to respond, please be patient (Status 0x80)
  ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata2.00: ATA-8: ST3500320AS, SD15, max UDMA/133
  ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
  ata2.00: configured for UDMA/133
  ata2: EH complete
  
and then the usual SCSI messages about the newly seen drive.  The scsiadd -r
command works every time and does stop the disk indeed :

  sd 1:0:0:0: [sdb] Synchronizing SCSI cache
  sd 1:0:0:0: [sdb] Stopping disk
  ata2.00: disabled

and then when I switch the drive off :

  ata2: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xa frozen
  ata2: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  ata2: hard resetting link
  ata2: SATA link down (SStatus 0 SControl 300)
  ata2: EH complete

So thanks for the help and sorry for the bother. =)

-- 
Everything is more fun naked except cooking with grease.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/