Re: [PATCH 2/2] Kprobes: Move kprobes examples to samples/ - updated

From: Ananth N Mavinakayanahalli
Date: Tue Feb 05 2008 - 00:52:13 EST


On Tue, Feb 05, 2008 at 11:06:22AM +0530, Abhishek Sagar wrote:
> On 2/5/08, Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx> wrote:
>
> > + * Build and insert the kernel module as done in the kprobe example.
> > + * You will see the trace data in /var/log/messages and on the console
> > + * whenever sys_open() returns a negative value.
>
> A passing observation...."sys_open" should be replaced with "do_fork",
> whose return value is not checked at all.

Oops yes! Thanks Abhishek. I just wanted the program to print execution
time irrespective of error. Updated patch below...

---
From: Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx>

Move kprobes examples from Documentation/kprobes.txt to under samples/.
Patch originally by Randy Dunlap.

o Updated the patch to apply on 2.6.24-mm1
o Modified examples code to build on multiple architectures. Currently,
the examples code works for x86 and powerpc
o Cleaned up unneeded #includes
o Cleaned up Kconfig per Sam Ravnborg's suggestions to fix build break
on archs that don't have kretprobes
o Implemented suggestions by Mathieu Desnoyers on CONFIG_KRETPROBES
o Included Andrew Morton's cleanup based on x86-git

Signed-off-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxx>
---
Documentation/kprobes.txt | 235 ------------------------------------
samples/Kconfig | 11 +
samples/Makefile | 2
samples/kprobes/Makefile | 5
samples/kprobes/jprobe_example.c | 68 ++++++++++
samples/kprobes/kprobe_example.c | 91 +++++++++++++
samples/kprobes/kretprobe_example.c | 94 ++++++++++++++
7 files changed, 275 insertions(+), 231 deletions(-)

Index: linux-2.6.24/Documentation/kprobes.txt
===================================================================
--- linux-2.6.24.orig/Documentation/kprobes.txt
+++ linux-2.6.24/Documentation/kprobes.txt
@@ -193,7 +193,8 @@ code mapping.
The Kprobes API includes a "register" function and an "unregister"
function for each type of probe. Here are terse, mini-man-page
specifications for these functions and the associated probe handlers
-that you'll write. See the latter half of this document for examples.
+that you'll write. See the files in the samples/kprobes/ sub-directory
+for examples.

4.1 register_kprobe

@@ -421,249 +422,15 @@ e. Watchpoint probes (which fire on data

8. Kprobes Example

-Here's a sample kernel module showing the use of kprobes to dump a
-stack trace and selected i386 registers when do_fork() is called.
------ cut here -----
-/*kprobe_example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/sched.h>
-
-/*For each probe you need to allocate a kprobe structure*/
-static struct kprobe kp;
-
-/*kprobe pre_handler: called just before the probed instruction is executed*/
-int handler_pre(struct kprobe *p, struct pt_regs *regs)
-{
- printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
- p->addr, regs->eip, regs->eflags);
- dump_stack();
- return 0;
-}
-
-/*kprobe post_handler: called after the probed instruction is executed*/
-void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
-{
- printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
- p->addr, regs->eflags);
-}
-
-/* fault_handler: this is called if an exception is generated for any
- * instruction within the pre- or post-handler, or when Kprobes
- * single-steps the probed instruction.
- */
-int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
-{
- printk("fault_handler: p->addr=0x%p, trap #%dn",
- p->addr, trapnr);
- /* Return 0 because we don't handle the fault. */
- return 0;
-}
-
-static int __init kprobe_init(void)
-{
- int ret;
- kp.pre_handler = handler_pre;
- kp.post_handler = handler_post;
- kp.fault_handler = handler_fault;
- kp.symbol_name = "do_fork";
-
- ret = register_kprobe(&kp);
- if (ret < 0) {
- printk("register_kprobe failed, returned %d\n", ret);
- return ret;
- }
- printk("kprobe registered\n");
- return 0;
-}
-
-static void __exit kprobe_exit(void)
-{
- unregister_kprobe(&kp);
- printk("kprobe unregistered\n");
-}
-
-module_init(kprobe_init)
-module_exit(kprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-You can build the kernel module, kprobe-example.ko, using the following
-Makefile:
------ cut here -----
-obj-m := kprobe-example.o
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-default:
- $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-clean:
- rm -f *.mod.c *.ko *.o
------ cut here -----
-
-$ make
-$ su -
-...
-# insmod kprobe-example.ko
-
-You will see the trace data in /var/log/messages and on the console
-whenever do_fork() is invoked to create a new process.
+See samples/kprobes/kprobe_example.c

9. Jprobes Example

-Here's a sample kernel module showing the use of jprobes to dump
-the arguments of do_fork().
------ cut here -----
-/*jprobe-example.c */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/uio.h>
-#include <linux/kprobes.h>
-
-/*
- * Jumper probe for do_fork.
- * Mirror principle enables access to arguments of the probed routine
- * from the probe handler.
- */
-
-/* Proxy routine having the same arguments as actual do_fork() routine */
-long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
- struct pt_regs *regs, unsigned long stack_size,
- int __user * parent_tidptr, int __user * child_tidptr)
-{
- printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
- clone_flags, stack_size, regs);
- /* Always end with a call to jprobe_return(). */
- jprobe_return();
- /*NOTREACHED*/
- return 0;
-}
-
-static struct jprobe my_jprobe = {
- .entry = jdo_fork
-};
-
-static int __init jprobe_init(void)
-{
- int ret;
- my_jprobe.kp.symbol_name = "do_fork";
-
- if ((ret = register_jprobe(&my_jprobe)) <0) {
- printk("register_jprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Planted jprobe at %p, handler addr %p\n",
- my_jprobe.kp.addr, my_jprobe.entry);
- return 0;
-}
-
-static void __exit jprobe_exit(void)
-{
- unregister_jprobe(&my_jprobe);
- printk("jprobe unregistered\n");
-}
-
-module_init(jprobe_init)
-module_exit(jprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on
-the console whenever do_fork() is invoked to create a new process.
-(Some messages may be suppressed if syslogd is configured to
-eliminate duplicate messages.)
+See samples/kprobes/jprobe_example.c

10. Kretprobes Example

-Here's a sample kernel module showing the use of return probes to
-report failed calls to sys_open().
------ cut here -----
-/*kretprobe-example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/ktime.h>
-
-/* per-instance private data */
-struct my_data {
- ktime_t entry_stamp;
-};
-
-static const char *probed_func = "sys_open";
-
-/* Timestamp function entry. */
-static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- struct my_data *data;
-
- if(!current->mm)
- return 1; /* skip kernel threads */
-
- data = (struct my_data *)ri->data;
- data->entry_stamp = ktime_get();
- return 0;
-}
-
-/* If the probed function failed, log the return value and duration.
- * Duration may turn out to be zero consistently, depending upon the
- * granularity of time accounting on the platform. */
-static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- int retval = regs_return_value(regs);
- struct my_data *data = (struct my_data *)ri->data;
- s64 delta;
- ktime_t now;
-
- if (retval < 0) {
- now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
- printk("%s: return val = %d (duration = %lld ns)\n",
- probed_func, retval, delta);
- }
- return 0;
-}
-
-static struct kretprobe my_kretprobe = {
- .handler = return_handler,
- .entry_handler = entry_handler,
- .data_size = sizeof(struct my_data),
- .maxactive = 20, /* probe up to 20 instances concurrently */
-};
-
-static int __init kretprobe_init(void)
-{
- int ret;
- my_kretprobe.kp.symbol_name = (char *)probed_func;
-
- if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
- printk("register_kretprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name);
- return 0;
-}
-
-static void __exit kretprobe_exit(void)
-{
- unregister_kretprobe(&my_kretprobe);
- printk("kretprobe unregistered\n");
- /* nmissed > 0 suggests that maxactive was set too low. */
- printk("Missed probing %d instances of %s\n",
- my_kretprobe.nmissed, probed_func);
-}
-
-module_init(kretprobe_init)
-module_exit(kretprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on the
-console whenever sys_open() returns a negative value. (Some messages
-may be suppressed if syslogd is configured to eliminate duplicate
-messages.)
+See samples/kprobes/kretprobe_example.c

For additional information on Kprobes, refer to the following URLs:
http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
Index: linux-2.6.24/samples/Kconfig
===================================================================
--- linux-2.6.24.orig/samples/Kconfig
+++ linux-2.6.24/samples/Kconfig
@@ -22,5 +22,16 @@ config SAMPLE_KOBJECT

If in doubt, say "N" here.

+config SAMPLE_KPROBES
+ tristate "Build kprobes examples -- loadable modules only"
+ depends on KPROBES && m
+ help
+ This build several kprobes example modules.
+
+config SAMPLE_KRETPROBES
+ tristate "Build kretprobes example -- loadable modules only"
+ default m
+ depends on SAMPLE_KPROBES && KRETPROBES
+
endif # SAMPLES

Index: linux-2.6.24/samples/Makefile
===================================================================
--- linux-2.6.24.orig/samples/Makefile
+++ linux-2.6.24/samples/Makefile
@@ -1,3 +1,3 @@
# Makefile for Linux samples code

-obj-$(CONFIG_SAMPLES) += markers/ kobject/
+obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/
Index: linux-2.6.24/samples/kprobes/Makefile
===================================================================
--- /dev/null
+++ linux-2.6.24/samples/kprobes/Makefile
@@ -0,0 +1,5 @@
+# builds the kprobes example kernel modules;
+# then to use one (as root): insmod <module_name.ko>
+
+obj-$(CONFIG_SAMPLE_KPROBES) += kprobe_example.o jprobe_example.o
+obj-$(CONFIG_SAMPLE_KRETPROBES) += kretprobe_example.o
Index: linux-2.6.24/samples/kprobes/jprobe_example.c
===================================================================
--- /dev/null
+++ linux-2.6.24/samples/kprobes/jprobe_example.c
@@ -0,0 +1,68 @@
+/*
+ * Here's a sample kernel module showing the use of jprobes to dump
+ * the arguments of do_fork().
+ *
+ * For more information on theory of operation of jprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the
+ * console whenever do_fork() is invoked to create a new process.
+ * (Some messages may be suppressed if syslogd is configured to
+ * eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/*
+ * Jumper probe for do_fork.
+ * Mirror principle enables access to arguments of the probed routine
+ * from the probe handler.
+ */
+
+/* Proxy routine having the same arguments as actual do_fork() routine */
+static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+ struct pt_regs *regs, unsigned long stack_size,
+ int __user *parent_tidptr, int __user *child_tidptr)
+{
+ printk(KERN_INFO "jprobe: clone_flags = 0x%lx, stack_size = 0x%lx,"
+ " regs = 0x%p\n",
+ clone_flags, stack_size, regs);
+
+ /* Always end with a call to jprobe_return(). */
+ jprobe_return();
+ return 0;
+}
+
+static struct jprobe my_jprobe = {
+ .entry = jdo_fork,
+ .kp = {
+ .symbol_name = "do_fork",
+ },
+};
+
+static int __init jprobe_init(void)
+{
+ int ret;
+
+ ret = register_jprobe(&my_jprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_jprobe failed, returned %d\n", ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted jprobe at %p, handler addr %p\n",
+ my_jprobe.kp.addr, my_jprobe.entry);
+ return 0;
+}
+
+static void __exit jprobe_exit(void)
+{
+ unregister_jprobe(&my_jprobe);
+ printk(KERN_INFO "jprobe at %p unregistered\n", my_jprobe.kp.addr);
+}
+
+module_init(jprobe_init)
+module_exit(jprobe_exit)
+MODULE_LICENSE("GPL");
Index: linux-2.6.24/samples/kprobes/kprobe_example.c
===================================================================
--- /dev/null
+++ linux-2.6.24/samples/kprobes/kprobe_example.c
@@ -0,0 +1,91 @@
+/*
+ * NOTE: This example is works on x86 and powerpc.
+ * Here's a sample kernel module showing the use of kprobes to dump a
+ * stack trace and selected registers when do_fork() is called.
+ *
+ * For more information on theory of operation of kprobes, see
+ * Documentation/kprobes.txt
+ *
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever do_fork() is invoked to create a new process.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/* For each probe you need to allocate a kprobe structure */
+static struct kprobe kp = {
+ .symbol_name = "do_fork",
+};
+
+/* kprobe pre_handler: called just before the probed instruction is executed */
+static int handler_pre(struct kprobe *p, struct pt_regs *regs)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, ip = %lx,"
+ " flags = 0x%lx\n",
+ p->addr, regs->ip, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, nip = 0x%lx,"
+ " msr = 0x%lx\n",
+ p->addr, regs->nip, regs->msr);
+#endif
+
+ /* A dump_stack() here will give a stack backtrace */
+ return 0;
+}
+
+/* kprobe post_handler: called after the probed instruction is executed */
+static void handler_post(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, flags = 0x%lx\n",
+ p->addr, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, msr = 0x%lx\n",
+ p->addr, regs->msr);
+#endif
+}
+
+/*
+ * fault_handler: this is called if an exception is generated for any
+ * instruction within the pre- or post-handler, or when Kprobes
+ * single-steps the probed instruction.
+ */
+static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
+{
+ printk(KERN_INFO "fault_handler: p->addr = 0x%p, trap #%dn",
+ p->addr, trapnr);
+ /* Return 0 because we don't handle the fault. */
+ return 0;
+}
+
+static int __init kprobe_init(void)
+{
+ int ret;
+ kp.pre_handler = handler_pre;
+ kp.post_handler = handler_post;
+ kp.fault_handler = handler_fault;
+
+ ret = register_kprobe(&kp);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kprobe failed, returned %d\n", ret);
+ return ret;
+ }
+ printk(KERN_INFO "Planted kprobe at %p\n", kp.addr);
+ return 0;
+}
+
+static void __exit kprobe_exit(void)
+{
+ unregister_kprobe(&kp);
+ printk(KERN_INFO "kprobe at %p unregistered\n", kp.addr);
+}
+
+module_init(kprobe_init)
+module_exit(kprobe_exit)
+MODULE_LICENSE("GPL");
Index: linux-2.6.24/samples/kprobes/kretprobe_example.c
===================================================================
--- /dev/null
+++ linux-2.6.24/samples/kprobes/kretprobe_example.c
@@ -0,0 +1,94 @@
+/*
+ * Here's a sample kernel module showing the use of return probes to
+ * report the return value and total time taken for do_fork() to run.
+ *
+ * For more information on theory of operation of kretprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever do_fork() returns. (Some messages may be suppressed if
+ * syslogd is configured to eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/ktime.h>
+
+/* per-instance private data */
+struct my_data {
+ ktime_t entry_stamp;
+};
+
+/* Here we use the entry_hanlder to timestamp function entry */
+static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ struct my_data *data;
+
+ if (!current->mm)
+ return 1; /* Skip kernel threads */
+
+ data = (struct my_data *)ri->data;
+ data->entry_stamp = ktime_get();
+ return 0;
+}
+
+/*
+ * Return-probe handler: Log the return value and duration. Duration may turn
+ * out to be zero consistently, depending upon the granularity of time
+ * accounting on the platform.
+ */
+static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ int retval = regs_return_value(regs);
+ struct my_data *data = (struct my_data *)ri->data;
+ s64 delta;
+ ktime_t now;
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
+ printk(KERN_INFO "do_fork returned %d and took %lld ns to execute\n",
+ retval, (long long)delta);
+ return 0;
+}
+
+static struct kretprobe my_kretprobe = {
+ .handler = ret_handler,
+ .entry_handler = entry_handler,
+ .data_size = sizeof(struct my_data),
+ .kp = {
+ .symbol_name = "do_fork",
+ },
+ /* Probe up to 20 instances concurrently. */
+ .maxactive = 20,
+};
+
+static int __init kretprobe_init(void)
+{
+ int ret;
+
+ ret = register_kretprobe(&my_kretprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kretprobe failed, returned %d\n",
+ ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted return probe at %p\n", my_kretprobe.kp.addr);
+ return 0;
+}
+
+static void __exit kretprobe_exit(void)
+{
+ unregister_kretprobe(&my_kretprobe);
+ printk(KERN_INFO "kretprobe at %p unregistered\n",
+ my_kretprobe.kp.addr);
+
+ /* nmissed > 0 suggests that maxactive was set too low. */
+ printk(KERN_INFO "Missed probing %d instances of do_fork()\n",
+ my_kretprobe.nmissed);
+}
+
+module_init(kretprobe_init)
+module_exit(kretprobe_exit)
+MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/