Re: ide-tape redux (was: Re:)

[Borislav Petkov]

... and while we're at it ...

commit c824f79fe4040f7541d7e35c546bb57a22d2fe11
Author: Borislav Petkov <petkovbb@xxxxxxxxx>
Date:   Wed Feb 6 06:23:10 2008 +0100

    ide-tape: move all struct and other defs to the top
    
    Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 9455ce4..398aea8 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -225,6 +225,69 @@ enum {
 	PC_FL_WRITING		= (1 <<	5),
 };
 
+/* Tape door status */
+#define DOOR_UNLOCKED			0
+#define DOOR_LOCKED			1
+#define DOOR_EXPLICITLY_LOCKED		2
+
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FL_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FL_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FL_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
+};
+
+/* A define for the READ BUFFER command */
+#define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK	1
+#define IDETAPE_SPACE_TO_EOD		3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK		1
+#define IDETAPE_LU_RETENSION_MASK	2
+#define IDETAPE_LU_EOT_MASK		4
+
+/*
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+
+enum {
+	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
+	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
+	REQ_IDETAPE_READ	= (1 << 2),
+	REQ_IDETAPE_WRITE	= (1 << 3),
+	REQ_IDETAPE_READ_BUFFER	= (1 << 4),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define	IDETAPE_ERROR_GENERAL		101
+#define	IDETAPE_ERROR_FILEMARK		102
+#define	IDETAPE_ERROR_EOD		103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR	0
+#define	IDETAPE_CAPABILITIES_PAGE	0x2a
+
+
 /* A pipeline stage. */
 typedef struct idetape_stage_s {
 	struct request rq;			/* The corresponding request */
@@ -445,68 +508,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	mutex_unlock(&idetape_ref_mutex);
 }
 
-/* Tape door status */
-#define DOOR_UNLOCKED			0
-#define DOOR_LOCKED			1
-#define DOOR_EXPLICITLY_LOCKED		2
-
-/* Tape flag bits values. */
-enum {
-	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
-	/* 0 When the tape position is unknown */
-	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
-	/* Device already opened */
-	IDETAPE_FL_BUSY			= (1 << 2),
-	/* Error detected in a pipeline stage */
-	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
-	/* Attempt to auto-detect the current user block size */
-	IDETAPE_FL_DETECT_BS		= (1 << 4),
-	/* Currently on a filemark */
-	IDETAPE_FL_FILEMARK		= (1 << 5),
-	/* DRQ interrupt device */
-	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
-	/* pipeline active */
-	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
-	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
-};
-
-/* A define for the READ BUFFER command */
-#define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK	1
-#define IDETAPE_SPACE_TO_EOD		3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK		1
-#define IDETAPE_LU_RETENSION_MASK	2
-#define IDETAPE_LU_EOT_MASK		4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
-	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
-	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
-	REQ_IDETAPE_READ	= (1 << 2),
-	REQ_IDETAPE_WRITE	= (1 << 3),
-	REQ_IDETAPE_READ_BUFFER	= (1 << 4),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define	IDETAPE_ERROR_GENERAL		101
-#define	IDETAPE_ERROR_FILEMARK		102
-#define	IDETAPE_ERROR_EOD		103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR	0
-#define	IDETAPE_CAPABILITIES_PAGE	0x2a
-
 /*
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.

-- 
Regards/Gruß,
    Boris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/