Re: [PATCH] DS1WM: decouple host IRQ and INTR active statesettings.

[Andrew Morton]

On Tue, 8 Jan 2008 09:21:55 +0100 "pHilipp Zabel" <philipp.zabel@xxxxxxxxx> wrote:

> On Jan 8, 2008 1:13 AM, Matt Reimer <mreimer@xxxxxxxx> wrote:
> > On Mon, 2008-01-07 at 15:10 -0800, Andrew Morton wrote:
> > > On Sun, 06 Jan 2008 14:46:14 +0100
> > > Philipp Zabel <philipp.zabel@xxxxxxxxx> wrote:
> > >
> > > > The DS1WM driver incorrectly infers the IAS bit (1-wire interrupt active
> > > > high) from IRQ settings. There are devices that have IAS=0 but still need
> > > > the IRQ to trigger on a rising edge. With this patch, machines with DS1WM
> > > > that need IAS=1 have to set .active_high=1 in the ds1wm_platform_data.
> >
> > > But no drivers are converted to set ds1wm_platform_data.active_high.  Won't
> > > IORESOURCE_IRQ_HIGHEDGE devices be broken by this change?
> >
> > Good point; I think you're right. I'd guess the other platforms that use
> > this driver are in the handhelds.org tree, but I've been out of the loop
> > a while. Philipp, is this the case?
> 
> Yes, I think so. I am only aware of four chips that include a DS1WM:
> HTC's ASIC3, PASIC2 and PASIC3 and Samsung SAMCOP.
> All of those drivers have yet to be submitted.
> 
> I will also apply this patch to hh.org CVS and fix up the devices that are
> affected by this change (aximx30, blueangel, magician, h1900, h4000,
> h5400, himalaya, hx4700, sable, universal).
> But none of those set IORESOURCE_IRQ_HIGHEDGE (most are just
> missing the IORESOURCE_IRQ_LOWEDGE flag). I am not sure about
> the status of rx3000 or other devices that might live in other trees.
> 
> I'm currently cleaning up the PASIC2/3 driver. After that I'll try to help
> cleaning up ASIC3 and finally getting it ready for submission.
> A whole load of devices in the hh.org tree depend on it.
> 

Guys, I'm thinking that by the time we actually need this patch in the
mainline tree, it may well be obsolete.  So I should drop the copy I have?


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/