Re: [PATCH][drivers/misc/thinkpad_acpi.c] duplicate test if (level& TP_EC_FAN_FULLSPEED)
From: Greg KH
Date: Wed Feb 06 2008 - 18:18:41 EST
On Tue, Feb 05, 2008 at 09:34:54AM +0100, Roel Kluin wrote:
> Henrique de Moraes Holschuh wrote:
> > On Tue, 05 Feb 2008, Roel Kluin wrote:
> >> Roland Dreier wrote:
> >>> > /* safety net should the EC not support AUTO
> >>> > * or FULLSPEED mode bits and just ignore them */
> >>> > if (level & TP_EC_FAN_FULLSPEED)
> >>> > level |= 7; /* safety min speed 7 */
> >>> > else if (level & TP_EC_FAN_FULLSPEED)
> >>> > level |= 4; /* safety min speed 4 */
> >>> >
> >>> > Note the duplicate test 'if (level & TP_EC_FAN_FULLSPEED)'. should
> >>> > this be replaced by
> >>>
> >>> Actually I suspect one of the two tests should be against TP_EC_FAN_AUTO
> >>> (based on the comment).
> >> Thanks Roland, for your info
> >>
> >> based on the comments in commit eaa7571b2d1a08873e4bdd8e6db3431df61cd9ad,
> >> I think this should be modified like below:
> >>
> >> ACPI: thinkpad-acpi: add a safety net for TPEC fan control mode
> >> The Linux ThinkPad community is not positive that all ThinkPads that do
> >> HFSP EC fan control do implement full-speed and auto modes, some of the
> >> earlier ones supporting HFSP might not.
> >>
> >> If the EC ignores the AUTO or FULL-SPEED bits, it will pay attention to the
> >> lower three bits that set the fan level. And as thinkpad-acpi was leaving
> >> these set to zero, it would stop(!) the fan, which is Not A Good Thing.
> >> So, as a safety net, we now make sure to also set the fan level part of the
> >> HFSP register to speed 7 for full-speed, and a minimum of speed 4 for auto
> >> mode.
> >> --
> >> second TP_EC_FAN_FULLSPEED should be P_EC_FAN_AUTO
> >>
> >>
> >> Signed-off-by: Roel Kluin <12o3l@xxxxxxxxxx>
> >> ---
> >> diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
> >> index cf56647..3c323fe 100644
> >> --- a/drivers/misc/thinkpad_acpi.c
> >> +++ b/drivers/misc/thinkpad_acpi.c
> >> @@ -4138,7 +4138,7 @@ static int fan_set_level(int level)
> >> * or FULLSPEED mode bits and just ignore them */
> >> if (level & TP_EC_FAN_FULLSPEED)
> >> level |= 7; /* safety min speed 7 */
> >> - else if (level & TP_EC_FAN_FULLSPEED)
> >> + else if (level & TP_EC_FAN_AUTO)
> >> level |= 4; /* safety min speed 4 */
> >>
> >> if (!acpi_ec_write(fan_status_offset, level))
> >
> > ACK. This needs to be sent to stable as well. I think both 2.6.22 and
> > 2.6.23 need this patch.
> >
>
> CC stable@xxxxxxxxxx
Please send us a real copy of the patch, when it goes into Linus's tree,
so we know what to apply, and that it is safe to do so.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/