[patch 13/73] sky2: disable rx checksum on Yukon XL

[Greg KH]

2.6.23-stable review patch.  If anyone has any objections, please let us know.
------------------
From: Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx>

Backport of 8b31cfbcd1b54362ef06c85beb40e65a349169a2

The Marvell Yukon XL chipset appears to have a hardware glitch
where it will repeat the checksum of the last packet. Of course, this is
timing sensitive and only happens sometimes...

More info: http://bugzilla.kernel.org/show_bug.cgi?id=9381

As a workaround just disable hardware checksumming by default on
this chip version. The earlier workaround for PCIX, dual port
was also on Yukon XL so don't need to disable checksumming there.

Signed-off-by: Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>


---
 drivers/net/sky2.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1307,15 +1307,11 @@ static int sky2_up(struct net_device *de
 	 */
 	if (otherdev && netif_running(otherdev) &&
  	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
- 		struct sky2_port *osky2 = netdev_priv(otherdev);
  		u16 cmd;
 
  		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
  		cmd &= ~PCI_X_CMD_MAX_SPLIT;
  		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
-
- 		sky2->rx_csum = 0;
- 		osky2->rx_csum = 0;
  	}
 
 	if (netif_msg_ifup(sky2))
@@ -4017,7 +4013,7 @@ static __devinit struct net_device *sky2
 	sky2->duplex = -1;
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
-	sky2->rx_csum = 1;
+	sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
 	sky2->wol = wol;
 
 	spin_lock_init(&sky2->phy_lock);

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/