Trivial patch to Documentation/i386/IO-APIC.txt

[Nick Andrew]

The description of the interrupt routing doesn't match the (nice) diagram.

Signed-off-by: Nick Andrew <nick@xxxxxxxxxxxxxxx>

Nick.

--- a/Documentation/i386/IO-APIC.txt	2007-10-10 06:31:38.000000000 +1000
+++ b/Documentation/i386/IO-APIC.txt	2008-02-12 11:57:08.000000000 +1100
@@ -68,7 +68,7 @@
 
 These INTA-D PCI IRQs are always 'local to the card', their real meaning
 depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
 the PCI chipset. Most cards issue INTA, this creates optimal distribution
 between the PIRQ lines. (distributing IRQ sources properly is not a
 necessity, PCI IRQs can be shared at will, but it's a good for performance
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/