Re: Open bugs

From: James Bottomley
Date: Tue Feb 12 2008 - 12:57:22 EST


Added linux-scsi for the SCSI ones

On Tue, 2008-02-12 at 00:18 -0800, Natalie Protasevich wrote:
> Hello,
>
> The bugs listed are over a month old, and haven't been addressed yet.
> It would be appreciated if corresponding maintainers identify whether
> the bugs have been fixed, or need to be worked on, and take
> appropriate action.
>
> In most cases, reporters are standing by and ready to provide
> information and necessary testing.
> Thanks!
>
> SCSI======================================================
>
> Problems on booting
> http://bugzilla.kernel.org/show_bug.cgi?id=9621
> Date: 12/22/2007
> Regression
> Summary: The boot stops / hangs on hardware detection of SCSI. I have
> an InitioINI-9X00U/UW
> When I have an usb key sticked in /dev/sba, and run lilo then, then it
> dont boot but give L99 99 99 99 ... error

I think this was fixed by commit
e2d435ea4084022ab88efa74214accb45b1f9e92

Apparently bugzilla email is on the fritz again because this bug report
didn't come across linux-scsi.

> Resetting RAID attached to a FC Switch causes kernel panic and crash
> http://bugzilla.kernel.org/show_bug.cgi?id=9598
> 12/18/2007
> Hardware Environment:SunFire X4200 - 2 x dual core AMD Opteron CPUs,
> 8GB Ram, Qlogic FC adapter.
> Summary: Resetting the RAID box causes the X4200 to crash.

This one looks like the usual problem of remove re-add with the SCSI
device model.

> 3ware 9650SE -8LPML not recognized by 3w-9xxx driver
> http://bugzilla.kernel.org/show_bug.cgi?id=8908
> 08/19/2007
> Problem Description: The 3w-9xxx kernel driver for 3ware 9xxx SATA
> RAID Controller series did not recognize the 3ware 9650SE-8LPML SATA
> RAID Controller.

Since this one never apparently worked it's not a regression but an
enhancement request, isn't it?

However, adding this PCI ID to the driver should be fairly
straightforward. Does anyone know what the actual PCI IDs are?

James


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/