Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1

[Andrew Morton]

(cc's added)

On Mon, 11 Feb 2008 17:44:08 +0100 "Aron Stansvik" <elvstone@xxxxxxxxx> wrote:

> Hello LKML.
> 
> Under semi-high disk I/O (e.g. installing a compiled KDE), I get the
> following (accompanied by seconds of lock-ups on the machine):
> 
> [ 7727.345183] arcmsr0: abort device command of scsi id = 0 lun = 0
> [ 7730.348776] arcmsr0:                 scsi id = 0 lun = 0 ccb =
> '0xdfb461c0' poll command abort successfully
> [ 8053.795943] arcmsr0: abort device command of scsi id = 0 lun = 0
> [ 8056.799528] arcmsr0:                 scsi id = 0 lun = 0 ccb =
> '0xdfb595e0' poll command abort successfully
> [ 8884.592810] arcmsr0: abort device command of scsi id = 0 lun = 0
> [ 8887.596392] arcmsr0:                 scsi id = 0 lun = 0 ccb =
> '0xdfb56d80' poll command abort successfully
> [ 8917.760216] arcmsr0: abort device command of scsi id = 0 lun = 0
> [ 8920.763797] arcmsr0:                 scsi id = 0 lun = 0 ccb =
> '0xdfb472c0' poll command abort successfully
> [ 9074.106547] arcmsr0: abort device command of scsi id = 0 lun = 0
> 
> This is my setup:
> 
> 1 x MSI K8N Master2-FAR
> 1 x Opteron 252
> 1 x Areca ARC1200 (sitting in a PCIe x4 socket)
> 2 x WD1500ADFD in RAID1
> 
> astan@rubik:~$ uname -a
> Linux rubik 2.6.24-7-generic #1 SMP Thu Feb 7 01:29:58 UTC 2008 i686 GNU/Linux
> astan@rubik:~$ modinfo arcmsr
> filename:
> /lib/modules/2.6.24-7-generic/kernel/drivers/scsi/arcmsr/arcmsr.ko
> version:        Driver Version 1.20.00.15 2007/08/30
> license:        Dual BSD/GPL
> description:    ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID HOST Adapter
> author:         Erich Chen <support@xxxxxxxxxxxx>
> srcversion:     28EAD6AB49D4491CA04D465
> [...]
> 
> I've read some previous posts here on LKML that it could be the Areca
> firmware who doesn't like my WD disks. Anyone know if this is an IRQ
> handling problem in the kernel, or if it's a problem with the RAID
> controller firmware?
> 
> Erich Chen (of Areca); have you tried the new ARC1200 in RAID1
> configuration with Raptor disks on Linux?
> 
> As a side note, I can tell you that I first tried running FreeBSD 6.3
> (RELENG_6) on this machine, but got random reboots during disk I/O
> (even with a kernel with KDB debugging turned on). This leads me to
> believe that it might be a firmware issue, and that Linux just handles
> it more gracefully than FreeBSD.
> 
> Any ideas or advice is appriciated. This is my first post to the LKML,
> so please instruct me if you want more information or if you want me
> to take further debugging actions.
> 
> Best regards,
> Aron Stansvik

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/