Re: [discuss] "ide=reverse" do we still need this?

[Dirk GOUDERS]

Hi,

> I'm reworking the pci device list logic (we currently keep all PCI
> devices in 2 lists, which isn't the nicest, we should be able to get
> away with only 1 list.)
> 
> The only bother I've found so far is the pci_get_device_reverse()
> function, it's used in 2 places, IDE and the calgary driver.
> 
> I'm curious if we really still support the ide=reverse option?  It's a
> config option that I don't think the distros still enable (SuSE does
> not).  Is this still needed these days?
> 
> In digging, we changed this option in 2.2.x from being called
> "pci=reverse" and no one else seems to miss it.
> 
> Any thoughts?

I remember vaguely that some years ago, we set up a box with four IDE
disks as a RAID set.  For that purpose, we added a PCI ATA100 controller
so that each disk could act as a primary IDE device and we were only able
to boot the system with the option ide=reverse.
That box has been replaced by some other so I cannot verify it but as
far as I remember it was a problem with disk numbering between BIOS,
bootloader and/or kernel.  Also, at that time we used lilo and I am not
sure if grub would have done better.

Dirk
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/