Re: stuck with 2.6.23.14 on x86_64

[Fabio Coatti]

Alle martedì 12 febbraio 2008, Rafael J. Wysocki ha scritto:
> On Tuesday, 12 of February 2008, Fabio Coatti wrote:
> > Alle martedì 12 febbraio 2008, Randy Dunlap ha scritto:
> > > On Tue, 12 Feb 2008 15:03:41 +0100 Fabio Coatti wrote:
> > > > Hi all,
> > > > I'm stuck in a weird situation: I'm unable to go beyond 2.6.23.14, so
> > > > to fix the splice bug I've had to apply by hand the patch. (x86_64)
> > > >
> > > > Basically, with 2.6.24.2 (the same with 2.6.24 and .1), tha machine
> > > > won't boot due to a problem with cciss driver, that prevents to find
> > > > the / partition. (bug described here: Kernel Bug Tracker Bug 9859
> > > > http://bugzilla.kernel.org/show_bug.cgi?id=9859 );
> > > >
> > > > With kernels 2.6.23, the lastest that I can compile is 2.6.23.14;
> > > > starting from .15 (and .16) I get this message:
> > > >
> > > > ======================
> > > >   UPD     include/linux/compile.h
> > > >   CC      init/version.o
> > > >   LD      init/built-in.o
> > > >   LD      .tmp_vmlinux1
> > > > drivers/built-in.o: In function `acpi_init':
> > > > bus.c:(.init.text+0x1713): undefined reference to `pm_flags'
> > > > bus.c:(.init.text+0x1756): undefined reference to `pm_flags'
> > > > ======================
> > > >
> > > > All .config are the same, (make oldconfig) beside the obvious
> > > > differences between .23 and .24
> > > >
> > > > Hardware: x86_64 AMD 2216HE
> > > > SCSI controller: HP Smart Array E200i Controller
> > > > Compiler: gcc (GCC) 4.1.1
> > > > binutils: 2.16.1
> > > >
> > > > On a x86 machine, Intel(R) Xeon(TM) CPU 3.20GHz
> > > > with a cciss0: HP Smart Array 6i Controller,
> > > > the 2.6.24.2 compiles just fine and works, so the cciss problems
> > > > seems related only to E200i controller.
> > > >
> > > > Right now, on AMD64 machines, I'm forced to patch by hand the kernel,
> > > > that's quite uncomfortable :)
> > > >
> > > > Can someone point me in the right direction to get out of this
> > > > situation? Of course I can provide any further information. (.config
> > > > not inlcuded now to avoid cluttering  )
> > > >
> > > > Thanks for any answer.
> > >
> > > a/ send .config file for the build problem above
> > > b/ How do you download and/or apply 2.6.23.{15,16} ?
> > > 	Full tarball or base tarball + patches?
> > > 	If patches, what base tree are they applied to?
> >
> > full tarball from kernel.org (.16), tried also applying patches to 2.6.23
> > vanilla.(.15,.16) Same process leads to successful compilation for .14
>
> You're not supposed to have CONFIG_PM unset and CONFIG_ACPI set at the same
> time.  The oldconfig generation must have gone wrong at one point.

Maybe it's not supposed to have this situation, but maybe you should tell this 
to the kernel itself :)

# zcat /proc/config.gz | egrep "PM|ACPI"
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_PM is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set

# uname -rv
2.6.23.12 #3 SMP Tue Feb 12 11:22:16 CET 2008

And you can easily get this situation from menuconfig: just fire up make 
menuconfig without any .config, go to power management options and turn 
off "Power Management support". exit and look at .config:

# CONFIG_PM is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_ACPI=y

Maybe if this is not supposed to be the right situation, some dependencies are 
not respected... (tested on .16)

Anyway, with .16 and CONFIG_PM set, I get this :
===================
WARNING: vmlinux.o(.text+0x1f6395): Section mismatch: reference 
to .init.data.14:pxm_to_node_map (between 'pxm_to_node' and 'node_to_pxm')
WARNING: vmlinux.o(.text+0x1f63a7): Section mismatch: reference 
to .init.data.14:node_to_pxm_map (between 'node_to_pxm' 
and '__acpi_map_pxm_to_node')
WARNING: vmlinux.o(.text+0x1f63b2): Section mismatch: reference 
to .init.data.14:pxm_to_node_map (between '__acpi_map_pxm_to_node' 
and 'acpi_get_pxm')
WARNING: vmlinux.o(.text+0x1f63bc): Section mismatch: reference 
to .init.data.14:node_to_pxm_map (between '__acpi_map_pxm_to_node' 
and 'acpi_get_pxm')
WARNING: vmlinux.o(.text+0x1f6412): Section mismatch: reference 
to .init.data.14:pxm_to_node_map (between 'acpi_map_pxm_to_node' 
and 'acpi_get_node')
WARNING: vmlinux.o(.text+0x1f6458): Section mismatch: reference 
to .init.data.14:pxm_to_node_map (between 'acpi_map_pxm_to_node' 
and 'acpi_get_node')
WARNING: vmlinux.o(.text+0x1f645f): Section mismatch: reference 
to .init.data.14:node_to_pxm_map (between 'acpi_map_pxm_to_node' 
and 'acpi_get_node')
=========================

Anyway, it booted and so far it runs without "splice" problem, thanks.


-- 
Fabio "Cova" Coatti    http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/