Re: CONFIG_SLUB and reproducable general protection faults on2.6.2x

[Nicholas A. Bellinger]

On Tue, 2008-02-12 at 22:18 -0800, Nicholas A. Bellinger wrote:
> On Tue, 2008-02-12 at 19:57 -0800, Nicholas A. Bellinger wrote:
> > Greetings all,
> > 
> > On Tue, 2008-02-12 at 17:05 +0100, Bart Van Assche wrote:
> > > On Feb 6, 2008 1:11 AM, Nicholas A. Bellinger <nab@xxxxxxxxxxxxxxx> wrote:
> > > > I have always observed the case with LIO SE/iSCSI target mode ...
> > > 
> > > Hello Nicholas,
> > > 
> > > Are you sure that the LIO-SE kernel module source code is ready for
> > > inclusion in the mainstream Linux kernel ? As you know I tried to test
> > > the LIO-SE iSCSI target. Already while configuring the target I
> > > encountered a kernel crash that froze the whole system. I can
> > > reproduce this kernel crash easily, and I reported it 11 days ago on
> > > the LIO-SE mailing list (February 4, 2008). One of the call stacks I
> > > posted shows a crash in mempool_alloc() called from jbd. Or: the crash
> > > is most likely the result of memory corruption caused by LIO-SE.
> > > 
> > 
> > So I was able to FINALLY track this down to:
> > 
> > -# CONFIG_SLUB_DEBUG is not set
> > -# CONFIG_SLAB is not set
> > -CONFIG_SLUB=y
> > +CONFIG_SLAB=y
> > 
> > in both your and Chris Weiss's configs that was causing the
> > reproduceable general protection faults.  I also disabled
> > CONFIG_RELOCATABLE and crash dump because I was debugging using kdb in
> > x86_64 VM on 2.6.24 with your config.  I am pretty sure you can leave
> > this (crash dump) in your config for testing.
> > 
> > This can take a while to compile and take up alot of space, esp. with
> > all of the kernel debug options enabled, which on 2.6.24, really amounts
> > to alot of CPU time when building.  Also with your original config, I
> > was seeing some strange undefined module objects after Stage 2 Link with
> > iscsi_target_mod with modpost with the SLUB the lockups (which are not
> > random btw, and are tracked back to __kmalloc())..  Also, at module load
> > time with the original config, there where some warning about symbol
> > objects (I believe it was SCSI related, same as the ones with modpost).
> > 
> > In any event, the dozen 1000 loop discovery test is now working fine (as
> > well as IPoIB) with the above config change, and you should be ready to
> > go for your testing.
> > 
> > Tomo, Vlad, Andrew and Co:
> > 
> > Do you have any ideas why this would be the case with LIO-Target..?  Is
> > anyone else seeing something similar to this with their target mode
> > (mabye its all out of tree code..?) that is having an issue..? I am
> > using Debian x86_64 and Bart and Chris are using Ubuntu x86_64 and we
> > both have this problem with CONFIG_SLUB on >= 2.6.22 kernel.org
> > kernels. 
> > 
> > Also, I will recompile some of my non x86 machines with the above
> > enabled and see if I can reproduce..  Here the Bart's config again:
> > 
> > http://groups.google.com/group/linux-iscsi-target-dev/browse_thread/thread/30835aede1028188
> > 
> 
> This is also failing on CONFIG_SLUB on 2.6.24 ppc64.  Since the rest of
> the system seems to work fine, my only guess it may be related to the
> fact that the module is being compiled out of tree.  I took a quick
> glance at what kbuild was using for compiler and linker parameters, but
> nothing looked out of the ordinary.
> 
> I will take a look with kdb and SLUB re-enabled on x86_64 and see if this
> helps shed any light on the issue.  Is anyone else seeing an issue with CONFIG_SLUB..?
> 

I was able to track this down to a memory corruption issue in the
in-band iSCSI discovery path.  I just made the change, and the diff can
be located at:

http://groups.google.com/group/linux-iscsi-target-dev/browse_thread/thread/a70d4835c55be392

In any event, this is now fixed, and I will be generating some new
builds for LIO-Target shortly for Debian, CentOS and Ubuntu.  Espically
for the Ubuntu folks, where this is going to be an issue with their
default kernel config.

A big thanks to Bart Van Assche for helping me locate the actual issue,
and giving me a clue with slub_debug=FZPU.  Thanks again,

--nab

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/