Re: [2.6.25-rc1 regression] Suspend to RAM (bisected)
From: Len Brown
Date: Thu Feb 14 2008 - 00:20:42 EST
Applied.
thanks,
-Len
On Monday 11 February 2008 18:20, Venki Pallipadi wrote:
> On Mon, Feb 11, 2008 at 12:06:50PM -0800, Venki Pallipadi wrote:
> > On Mon, Feb 11, 2008 at 05:37:04PM -0200, Carlos R. Mafra wrote:
> > > Pallipadi, Venkatesh wrote:
> > > >
> > > > Can you send me the output of acpidump and full dmesg to me. Looks like
> > > > it is a platform issue due to which we cannot use C1 mwait idle during
> > > > suspend resume, something similar to issue we had with using C2/C3 state
> > > > during idle.
> > >
> > > Full dmesg and acpidump outputs are attached.
> >
> > Above acpidump doesnt have all info, as it is loading some SSDT at run time.
> > Can you get the output of
> >
> > # acpidump --addr 0x7F6D8709 --length 0x000004B7
> > # acpidump --addr 0x7F6D8BC0 --length 0x00000092
> >
>
> Thanks for sending the dumps Carlos.
>
> The patch below (on top of rc1) should fix the problem. Can you please
> check it.
>
> Thanks,
> Venki
>
>
> Earlier patch (bc71bec91f9875ef825d12104acf3bf4ca215fa4) broke
> suspend resume on many laptops. The problem was reported by
> Carlos R. Mafra and Calvin Walton, who bisected the issue to above patch.
>
> The problem was because, C2 and C3 code were calling acpi_idle_enter_c1
> directly, with C2 or C3 as state parameter, while suspend/resume was in
> progress. The patch bc71bec started making use of that state information,
> assuming that it would always be referring to C1 state. This caused the
> problem with suspend-resume as we ended up using C2/C3 state indirectly.
>
> Fix this by adding acpi_idle_suspend check in enter_c1.
>
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@xxxxxxxxx>
>
> Index: linux-2.6.25-rc1/drivers/acpi/processor_idle.c
> ===================================================================
> --- linux-2.6.25-rc1.orig/drivers/acpi/processor_idle.c
> +++ linux-2.6.25-rc1/drivers/acpi/processor_idle.c
> @@ -1420,6 +1420,14 @@ static int acpi_idle_enter_c1(struct cpu
> return 0;
>
> local_irq_disable();
> +
> + /* Do not access any ACPI IO ports in suspend path */
> + if (acpi_idle_suspend) {
> + acpi_safe_halt();
> + local_irq_enable();
> + return 0;
> + }
> +
> if (pr->flags.bm_check)
> acpi_idle_update_bm_rld(pr, cx);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/