Re: [PATCH] call gpio_cansleep only after gpio_request succeeded

From: David Brownell
Date: Thu Feb 14 2008 - 11:44:05 EST


On Thursday 14 February 2008, Uwe Kleine-König wrote:
> If you have GPIO_LIB gpio_cansleep oopses on an invalid
> gpio. So better gpio_request your pin first.
>
> Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@xxxxxxxx>
> Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

... my bad, sorry. The "first do gpio_request(), THEN
you can test gpio_cansleep()" issue got resolved in that
direction a bit late; this is the only in-tree driver
that I know would be affected. My test platforms haven't
yet been updated to 2.6.25-rc1 ... :(



> Cc: Raphael Assenat <raph@xxxxxx>
> Cc: Richard Purdie <rpurdie@xxxxxxxxx>
> ---
> Hello,
>
> I currently start using GPIO_LIB and don't have any chips yet. The Oops will
> vanish after I will have registered the chips for my SoC's gpios, but still
> this way the code is more robust.
>
> Best regards
> Uwe
>
> drivers/leds/leds-gpio.c | 8 ++++----
> 1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
> index 6c0a9c4..76ddcf3 100644
> --- a/drivers/leds/leds-gpio.c
> +++ b/drivers/leds/leds-gpio.c
> @@ -79,6 +79,10 @@ static int gpio_led_probe(struct platform_device *pdev)
> cur_led = &pdata->leds[i];
> led_dat = &leds_data[i];
>
> + ret = gpio_request(led_dat->gpio, cur_led->name);
> + if (ret < 0)
> + goto err;
> +
> led_dat->cdev.name = cur_led->name;
> led_dat->cdev.default_trigger = cur_led->default_trigger;
> led_dat->gpio = cur_led->gpio;
> @@ -87,10 +91,6 @@ static int gpio_led_probe(struct platform_device *pdev)
> led_dat->cdev.brightness_set = gpio_led_set;
> led_dat->cdev.brightness = LED_OFF;
>
> - ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
> - if (ret < 0)
> - goto err;
> -
> gpio_direction_output(led_dat->gpio, led_dat->active_low);
>
> INIT_WORK(&led_dat->work, gpio_led_work);
> --
> 1.5.4.1
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/