Re: [PATCH 05/11] ppc/mpc8xx: remove ppc_ide_md hooks

[Vitaly Bordug]

On Thu, 14 Feb 2008 01:36:56 +0100
Bartlomiej Zolnierkiewicz wrote:

> * Initialize IDE ports in mpc8xx_ide_probe().
> 
> * Remove m8xx_ide_init() and ppc_ide_md hooks - no need for them
>   (IDE mpc8xx host driver takes care of all this setup).
> 
> * Remove needless 'if (irq)' and 'if (data_port >= MAX_HWIFS)' checks
>   from m8xx_ide_init_hwif_ports().
> 
> * Remove 'ctrl_port' and 'irq' arguments from
> m8xx_ide_init_hwif_ports().
> 
> * Rename m8xx_ide_init_hwif_ports() to m8xx_ide_init_ports().
> 
> * Add __init tag to m8xx_ide_init_ports().
> 
> This patch fixes hwif->irq always being overriden to 0 (==
> auto-probe, is this even working on PPC?) because of
> ide_init_default_irq() call in ide.c.
> 
> There should be no other functional changes.
> 
> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Acked-by: Vitaly Bordug <vitb@xxxxxxxxxxxxxxxxxxx>


> ---
>  arch/ppc/syslib/m8xx_setup.c |    6 ---
>  drivers/ide/ppc/mpc8xx.c     |   86
> +++++++++++-------------------------------- 2 files changed, 22
> insertions(+), 70 deletions(-)
> 
> Index: b/arch/ppc/syslib/m8xx_setup.c
> ===================================================================
> --- a/arch/ppc/syslib/m8xx_setup.c
> +++ b/arch/ppc/syslib/m8xx_setup.c
> @@ -87,8 +87,6 @@ void m8xx_calibrate_decr(void);
>  
>  unsigned char __res[sizeof(bd_t)];
>  
> -extern void m8xx_ide_init(void);
> -
>  extern unsigned long find_available_memory(void);
>  extern void m8xx_cpm_reset(void);
>  extern void m8xx_wdt_handler_install(bd_t *bp);
> @@ -474,8 +472,4 @@ platform_init(unsigned long r3, unsigned
>  
>  	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
>  	ppc_md.setup_io_mappings	= m8xx_map_io;
> -
> -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
> -	m8xx_ide_init();
> -#endif
>  }
> Index: b/drivers/ide/ppc/mpc8xx.c
> ===================================================================
> --- a/drivers/ide/ppc/mpc8xx.c
> +++ b/drivers/ide/ppc/mpc8xx.c
> @@ -99,32 +99,6 @@ static int _slot_ = -1;			/*
> will be rea /* Make clock cycles and always round up */
>  #define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) /
> 1000U ) 
> -
> -
> -/*
> - * IDE stuff.
> - */
> -static int
> -m8xx_ide_default_irq(unsigned long base)
> -{
> -#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
> -	if (base >= MAX_HWIFS)
> -		return 0;
> -
> -	printk("[%d] m8xx_ide_default_irq
> %d\n",__LINE__,ioport_dsc[base].irq);
> -	
> -	return (ioport_dsc[base].irq);
> -#else
> -        return 9;
> -#endif
> -}
> -
> -static unsigned long
> -m8xx_ide_default_io_base(int index)
> -{
> -        return index;
> -}
> -
>  #define M8XX_PCMCIA_CD2(slot)      (0x10000000 >> (slot << 4))
>  #define M8XX_PCMCIA_CD1(slot)      (0x08000000 >> (slot << 4))
>  
> @@ -149,12 +123,11 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL
>   */
>  
>  /*
> - * m8xx_ide_init_hwif_ports for a direct IDE interface _using_
> + * m8xx_ide_init_ports() for a direct IDE interface _using_
> + * MPC8xx's internal PCMCIA interface
>   */
>  #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
> -static void
> -m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, 
> -		unsigned long ctrl_port, int *irq)
> +static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long
> data_port) {
>  	unsigned long *p = hw->io_ports;
>  	int i;
> @@ -173,8 +146,6 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, 
>  	unsigned long base;
>  
>  	*p = 0;
> -	if (irq)
> -		*irq = 0;
>  
>  	pcmp = (pcmconf8xx_t *)(&(((immap_t
> *)IMAP_ADDR)->im_pcmcia)); 
> @@ -248,9 +219,6 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, 
>  		}
>  	}
>  
> -	if (data_port >= MAX_HWIFS)
> -		return;
> -
>  	if (_slot_ == -1) {
>  		printk ("PCMCIA slot has not been defined! Using A
> as default\n"); _slot_ = 0;
> @@ -292,11 +260,13 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, 
>  	 	*p++ = base + ioport_dsc[data_port].reg_off[i];
>  	}
>  
> -	if (irq) {
> +	hw->irq = ioport_dsc[data_port].irq;
> +	hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
> +
>  #ifdef CONFIG_IDE_8xx_PCCARD
> +	{
>  		unsigned int reg;
>  
> -		*irq = ioport_dsc[data_port].irq;
>  		if (_slot_)
>  			pgcrx = &((immap_t *)
> IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; else
> @@ -306,14 +276,11 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, 
>  		reg |= mk_int_int_mask (pcmcia_schlvl) << 24;
>  		reg |= mk_int_int_mask (pcmcia_schlvl) << 16;
>  		*pgcrx = reg;
> -#else	/* direct connected IDE drive, i.e. external IRQ, not
> the PCMCIA irq */
> -		*irq = ioport_dsc[data_port].irq;
> -#endif	/* CONFIG_IDE_8xx_PCCARD */
>  	}
> +#endif	/* CONFIG_IDE_8xx_PCCARD */
>  
>  	ide_hwifs[data_port].pio_mask = ATA_PIO4;
>  	ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
> -	ide_hwifs[data_port].ack_intr = (ide_ack_intr_t
> *)ide_interrupt_ack; 
>  	/* Enable Harddisk Interrupt,
>  	 * and make it edge sensitive
> @@ -329,16 +296,15 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, 
>  	/* Enable falling edge irq */
>  	pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
>  #endif	/* CONFIG_IDE_8xx_PCCARD */
> -}	/* m8xx_ide_init_hwif_ports() using 8xx internal PCMCIA
> interface */ +}
>  #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
>  
>  /*
> - * m8xx_ide_init_hwif_ports for a direct IDE interface _not_ using
> + * m8xx_ide_init_ports() for a direct IDE interface _not_ using
>   * MPC8xx's internal PCMCIA interface
>   */
>  #if defined(CONFIG_IDE_EXT_DIRECT)
> -void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
> -	unsigned long data_port, unsigned long ctrl_port, int *irq)
> +static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long
> data_port) {
>  	unsigned long *p = hw->io_ports;
>  	int i;
> @@ -349,8 +315,6 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
>  	unsigned long base;
>  
>  	*p = 0;
> -	if (irq)
> -		*irq = 0;
>  
>  	if (!ide_base) {
>  
> @@ -372,9 +336,6 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
>  #endif
>  	}
>  
> -	if (data_port >= MAX_HWIFS)
> -		return;
> -
>  	base = ide_base + ioport_dsc[data_port].base_off;
>  #ifdef DEBUG
>  	printk ("base: %08x + %08x = %08x\n",
> @@ -392,14 +353,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
>  	 	*p++ = base + ioport_dsc[data_port].reg_off[i];
>  	}
>  
> -	if (irq) {
> -		/* direct connected IDE drive, i.e. external IRQ */
> -		*irq = ioport_dsc[data_port].irq;
> -	}
> +	/* direct connected IDE drive, i.e. external IRQ */
> +	hw->irq = ioport_dsc[data_port].irq;
> +	hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
>  
>  	ide_hwifs[data_port].pio_mask = ATA_PIO4;
>  	ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
> -	ide_hwifs[data_port].ack_intr = (ide_ack_intr_t
> *)ide_interrupt_ack; 
>  	/* Enable Harddisk Interrupt,
>  	 * and make it edge sensitive
> @@ -407,8 +366,7 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
>  	/* (11-18) Set edge detect for irq, no wakeup from low power
> mode */ ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
>  			(0x80000000 >> ioport_dsc[data_port].irq);
> -}	/* m8xx_ide_init_hwif_ports() for CONFIG_IDE_8xx_DIRECT */ 
> -
> +}
>  #endif	/* CONFIG_IDE_8xx_DIRECT */
>  
>  
> @@ -829,20 +787,20 @@ static int identify  (volatile u8 *p)
>  	return (0);	/* don't know */
>  }
>  
> -void m8xx_ide_init(void)
> -{
> -	ppc_ide_md.default_irq          = m8xx_ide_default_irq;
> -	ppc_ide_md.default_io_base      = m8xx_ide_default_io_base;
> -	ppc_ide_md.ide_init_hwif        = m8xx_ide_init_hwif_ports;
> -}
> -
>  static int __init mpc8xx_ide_probe(void)
>  {
> +	hw_regs_t hw;
>  	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
>  
>  #ifdef IDE0_BASE_OFFSET
> +	memset(&hw, 0, sizeof(hw));
> +	m8xx_ide_init_ports(&hw, 0);
> +	ide_init_port_hw(&ide_hwifs[0], &hw);
>  	idx[0] = 0;
>  #ifdef IDE1_BASE_OFFSET
> +	memset(&hw, 0, sizeof(hw));
> +	m8xx_ide_init_ports(&hw, 1);
> +	ide_init_port_hw(&ide_hwifs[1], &hw);
>  	idx[1] = 1;
>  #endif
>  #endif
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@xxxxxxxxxx
> https://ozlabs.org/mailman/listinfo/linuxppc-dev


-- 
Sincerely, Vitaly
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/