Re: Disk schedulers

[FD Cami]

On Fri, 15 Feb 2008 10:11:26 -0700
Zan Lynx <zlynx@xxxxxxx> wrote:

> 
> On Fri, 2008-02-15 at 15:57 +0100, Prakash Punnoor wrote:
> > On the day of Friday 15 February 2008 Jan Engelhardt hast written:
> > > On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
> > > >Hello,
> > > >
> > > >whom should I blame about disk schedulers?
> > >
> > > Also consider
> > > - DMA (e.g. only UDMA2 selected)
> > > - aging disk
> > 
> > Nope, I also reported this problem _years_ ago, but till now much hasn't 
> > changed. Large writes lead to read starvation.
> 
> Yes, I see this often myself.  It's like the disk IO queue (I set mine
> to 1024) fills up, and pdflush and friends can stuff write requests into
> it much more quickly than any other programs can provide read requests.
> 
> CFQ and ionice work very well up until iostat shows average IO queuing
> above 1024 (where I set the queue number).

I can confirm that as well.

This is easily reproductible with dd if=/dev/zero of=somefile bs=2048
for example. After a short while, trying to read the disks takes an
awfully long time, even if the dd process is ionice'd.

What is worse is that other drives attached to the same controller become
unresponsive as well.
I use a Dell Perc 5/i (megaraid_sas) with :
* 2 SAS 15000 RPM drives, RAID1 => sda
* 4 SAS 15000 RPM drives, RAID5 => sdb
* 2 SATA 72000 RPM drives, RAID1 => sdc
Using dd or mkfs on sdb or sdc makes sda unresponsive as well.
Is this expected ?

Cheers

Francois
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/