Re: USB regression (and other failures) in 2.6.2[45]*

From: Andrew Buehler
Date: Sat Feb 16 2008 - 16:34:35 EST

Next message: Torsten Kaiser: "Re: Linux 2.6.25-rc2"
Previous message: Cyrill Gorcunov: "Re: [PATCH 2/3] sched: trivial sparse warning in sched.c"
In reply to: Alan Stern: "Re: USB regression (and other failures) in 2.6.2[45]*"
Next in thread: Alan Stern: "Re: USB regression (and other failures) in 2.6.2[45]*"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2/16/2008 12:16 PM, Alan Stern wrote:

On Sat, 16 Feb 2008, Andrew Buehler wrote:

(Note: I consider it blatantly incorrect to send a reply both to a
mailing list and directly to the address of someone who is
subscribed to that list unless you have reason to believe that that
someone will not see the message otherwise, but in this case I am
doing so anyway because I see no way to avoid it and still make
sure all relevant people receive the message.)

(I did not expect to receive any significant response to this part of
the message, and any discussion ensuing from it is unquestionably
offtopic for the kernel mailing lists. I will respond here for the
moment rather than sending a separate, private mail, but I am more than
willing to take further responses on this topic offlist or drop the
subject entirely as soon as that is requested.)

I (and a lot of other people as well, to judge by the email I
receive) don't think this is incorrect. For one thing, it's not
always possible to tell whether or not the recipient is subscribed to
any of the lists.

This is indeed why I did not see any way to avoid it in this instance.
However, that has no bearing on the question of whether or not it is
correct or appropriate to do so, only whether or not it is avoidable.

For another, getting two copies of a message is no big deal --

I disagree.

(For that matter, I am not in fact getting two copies; in fact, I am not
receiving through the list either messages which I send to the list or
messages which are sent both to the list and to me. Whether this is the
list's fault or Gmail's I don't know, though I suspect the former - but
it is very irritating, because it means that I do not see this thread on
the mailing list itself and have to carry on list-related discussion
from my Inbox.)

more irritating (IMO) is getting a rejection message as a result of
replying to message which was cross-posted to a closed list. But in
each case, hitting the "d" key will delete the unwanted message.

I keep complete archives of everything I receive except for spam and (in
some cases) duplicates. Deleting received mail is a highly unpalatable
option, and in any case the ability to delete it is not the point; the
important question is whether it should have been there to begin with.

When I receive a message sent directly to me in a discussion which is on
a list, I expect that it is because someone either considered it
important enough to warrant making certain it came to my attention
specifically, or wanted to continue the discussion but felt that it
should not continue to take place on the mailing list.

In fact, the thing that bothers me the most is when people reply to a
long email with just a few lines of new text but don't bother to
prune the long message down to its essential parts. This forces me
to read through hundreds of lines containing nothing new or of
interest in order to obtain a minimal amount of useful information.

On the matter of quoting correctly and snipping correctly, you are
preaching to the choir where I am concerned. My standards for how much
context to leave in before beginning to snip are perhaps a bit looser
than those of some people (I leave up to three levels of quote in total
unless more is strictly necessary, since I find that fewer than that
frequently does not provide enough context if one does not have the
discussion in recent memory), but in principle I agree with you
completely.

On 2/16/2008 10:20 AM, Alan Stern wrote:

To make a long story short, the USB symptoms you describe
indicate a problem with interrupt routing. This could well
explain the other difficulties too. There are various kernel
parameters you can try putting on the boot command line to work
around it: acpi=noirq or acpi=off or pci=noacpi or a few others.

I have now tried all three of these, with no apparent effect; the
USB drive is still not detected when plugged in after boot. A naive
search on Google provides no indication of other possible
parameters to try; the only list I have found of ACPI-related
kernel parameters includes no others which seem likely to be
helpful without more knowledge of the specifics of the situation
(and the subsystem) than I have.

What would the next step be?

People on LKML who are more familiar with interrupt routing problems
might be able to offer more help. For now, you can try things like
turning on CONFIG_USB_DEBUG, posting the output from dmesg, posting
the contents of /proc/interrupts (say before and after a new USB
device is plugged in).

In my current testing kernel, which I believe is the one with which I
captured the sole successful non-2.6.23.1 dmesg so far, CONFIG_USB_DEBUG
is on. The associated dmesg (obtained yesterday from booting with the
Flash drive connected) is attached. (The flood of 'no version magic,
tainting kernel' messages between line 600 and line 1160 are a side
effect of Novell's custom environment which I have not yet made the
effort to fix; the boot scripts attempt to detect the network card by
modprobing every network driver available until they find one which
works. Here, because the correct one fails, they wind up trying each one
twice.)

I have transcribed the contents of /proc/interrupts both before and
after plugging in the Flash drive I have been using for testing, and
they are also attached. I have been as careful as I could to be sure
that the contents of the attached 'r61-interrupts-[12].txt' files is the
same as what was shown on the laptop, but cannot absolutely guarantee
that I have not missed something. For the record, the '1' is from before
connecting the drive, and the '2' is from after.

I did try booting again with the Flash drive attached, in hopes of being
able to mount it and dump the contents of /proc/interrupts there to
obtain them with guaranteed accuracy, but it was not recognized after
being disconnected and reconnected again.

Assuming that the 2.6.23 kernel works on your computer, you can go
the extreme route of installing git and doing a bisection to find the
first patch causing your difficulty.

That would require me to learn enough of how git works, as distinct from
more traditional VCSes, to be able to use it with some confidence. This
is not impossible - indeed I want to do it at some point - but for the
time being I have no idea where to start, and indeed I am not especially
clear on exactly what (from a user's perspective) the differences been
git and e.g. CVS or Subversion are. I know that the entire concept
relies around a lack of centralization, but I have not been able to get
my head around what that means in a practical sense.

--
Andrew Buehler
Linux version 2.6.25-rc1 (root@zenboot) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Fri Feb 15 14:18:51 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001e6b0000 (usable)
BIOS-e820: 000000001e6b0000 - 000000001e6cd000 (ACPI data)
BIOS-e820: 000000001e6cd000 - 000000001e700000 (ACPI NVS)
BIOS-e820: 000000001e700000 - 000000001f000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
486MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6900] 000f6900
Entering add_active_range(0, 0, 124592) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 124592
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 124592
On node 0 totalpages: 124592
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 941 pages used for memmap
Normal zone: 119555 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000
Processor #0 6:6 APIC version 20
I/O APIC #1 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 20000000 (gap: 1f000000:d1000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123619
Kernel command line: 5 initrd=initrd.gz reboot=w root=/dev/ram rw ccps BOOT_IMAGE=Kernel
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1861.995 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 470824k/498368k available (3451k kernel code, 26956k reserved, 1024k data, 240k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
vmalloc : 0xdf000000 - 0xfffb7000 ( 527 MB)
lowmem : 0xc0000000 - 0xde6b0000 ( 486 MB)
.init : 0xc0568000 - 0xc05a4000 ( 240 kB)
.data : 0xc045ef18 - 0xc055f2f8 (1024 kB)
.text : 0xc0100000 - 0xc045ef18 (3451 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 16 of 16 pages preallocated
Calibrating delay using timer specific routine.. 3728.64 BogoMIPS (lpj=7457282)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 22k freed
CPU0: Intel(R) Celeron(R) CPU 540 @ 1.86GHz stepping 01
Total of 1 processors activated (3728.64 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
net_namespace: 164 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfdda7, last bus=24
PCI: Using configuration type 1
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0xfc000000-0xfdffffff
PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 3000-3fff
MEM window: 0xdc000000-0xdf3fffff
PREFETCH window: 0x00000000dfe00000-0x00000000dfefffff
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000dfb00000-0x00000000dfbfffff
PCI: Bridge: 0000:00:1c.3
IO window: 5000-5fff
MEM window: 0xd4000000-0xd5ffffff
PREFETCH window: 0x00000000df800000-0x00000000df8fffff
PCI: Bridge: 0000:00:1c.4
IO window: 6000-6fff
MEM window: 0xd0000000-0xd1ffffff
PREFETCH window: 0x00000000df500000-0x00000000df5fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 0x00007000-0x000070ff
IO window: 0x00007400-0x000074ff
PREFETCH window: 0xf4000000-0xf7ffffff
MEM window: 0x20000000-0x23ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 7000-afff
MEM window: 0xf8300000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 16382k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 3808, nTxLock = 30464
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b
pci 0000:00:1a.0: Performing full reset
pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1a.1: Performing full reset
pci 0000:00:1a.7: EHCI: BIOS handoff
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.7: EHCI: BIOS handoff
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
toshiba: not a supported Toshiba laptop
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
ICH8M: not 100% native mode: will probe irqs later
ICH8M: IDE port disabled
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:PIO
Probing IDE interface ide0...
hda: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 1.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 10
ata2: DUMMY
ata3: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: COMRESET failed (errno=-16)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: COMRESET failed (errno=-16)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: COMRESET failed (errno=-16)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usbmon: debugfs is not available
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file 'devices'
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1a.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: supports USB remote wakeup
ehci_hcd 0000:00:1a.7: irq 11, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25-rc1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: Single TT
hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25-rc1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v3.0
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.0: Performing full reset
uhci_hcd 0000:00:1a.0: irq 11, io base 0x00001860
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25-rc1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.1: Performing full reset
uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001880
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25-rc1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: irq 10, io base 0x000018a0
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
usb 2-2: new high speed USB device using ehci_hcd and address 2
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25-rc1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '006'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018c0
usb usb6: default language 0x0409
usb usb6: uevent
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
usb 6-0:1.0: uevent
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: individual port over-current protection
hub 6-0:1.0: power on to power good time: 2ms
hub 6-0:1.0: local power source is good
hub 6-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25-rc1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '007'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018e0
usb usb7: default language 0x0409
usb usb7: uevent
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
usb 7-0:1.0: uevent
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: individual port over-current protection
hub 7-0:1.0: power on to power good time: 2ms
hub 7-0:1.0: local power source is good
hub 7-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '001'
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.25-rc1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
sl811: driver sl811-hcd, 19 May 2005
/usr/src/linux-2.6.25-rc1/drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007
usb usb3: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
ehci_hcd 0000:00:1d.7: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802d cmd 10021
usb 2-2: khubd timed out on ep0in len=18/64
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802d cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
usb 2-2: device not accepting address 2, error -110
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 2-2: new high speed USB device using ehci_hcd and address 3
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0in len=18/64
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
ehci_hcd 0000:00:1d.7: IAA watchdog: status a02f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
usb 2-2: device not accepting address 3, error -110
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 2-2: new high speed USB device using ehci_hcd and address 4
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
usb 2-2: device not accepting address 4, error -110
ehci_hcd 0000:00:1d.7: port 2 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 2-2: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
ehci_hcd 0000:00:1d.7: IAA watchdog: status 802f cmd 10021
usb 2-2: khubd timed out on ep0out len=0/0
usb 2-2: device not accepting address 5, error -110
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: not running at top speed; connect to a high speed hub
usb 5-2: default language 0x0409
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
/usr/src/linux-2.6.25-rc1/drivers/usb/core/inode.c: creating file '002'
usb 5-2: New USB device found, idVendor=08ec, idProduct=0020
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: U3 smart 512MB
usb 5-2: Manufacturer: Ativa
usb 5-2: SerialNumber: 02D1EA6171E018E7
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
libusual 5-2:1.0: usb_probe_interface
libusual 5-2:1.0: usb_probe_interface - got id
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 240k freed
ISO 9660 Extensions: RRIP_1991A
hda: UDMA/33 mode selected
st: Version 20080117, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
usb 1-0:1.0: uevent
usb 2-0:1.0: uevent
usb 3-0:1.0: uevent
usb 4-0:1.0: uevent
usb 5-0:1.0: uevent
usb 5-2: uevent
usb 5-2:1.0: uevent
usb 6-0:1.0: uevent
usb 7-0:1.0: uevent
usb usb1: uevent
usb usb2: uevent
usb usb3: uevent
usb usb4: uevent
usb usb5: uevent
usb usb6: uevent
usb usb7: uevent
usb usb1: uevent
usb usb2: uevent
usb usb3: uevent
usb usb4: uevent
usb usb5: uevent
usb 5-2: uevent
usb usb6: uevent
usb usb7: uevent
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
zdisk[1069]: segfault at 0 ip b7d02bb0 sp bfab1ed0 error 4 in libc.so.6[b7c9c000+10b000]
mii: no version for "struct_module" found: kernel tainted.
mii: no version magic, tainting kernel.
ssb: no version magic, tainting kernel.
b44: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
8139too: no version magic, tainting kernel.
8139too Fast Ethernet driver 0.9.28
mii: no version magic, tainting kernel.
3c59x: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
eepro100: no version magic, tainting kernel.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
ni52: no version magic, tainting kernel.
ni52: Autoprobing not allowed for modules.
ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'
mii: no version magic, tainting kernel.
8139cp: no version magic, tainting kernel.
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
eth16i: no version magic, tainting kernel.
eth16i.c: Presently autoprobing (not recommended) for a single card.
eth16i.c No Eth16i card found (i/o = 0x0).
e1000e: no version magic, tainting kernel.
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
PCI: Setting latency timer of device 0000:00:19.0 to 64
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:12:d2:65
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
mii: no version magic, tainting kernel.
ssb: no version magic, tainting kernel.
b44: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
8139too: no version magic, tainting kernel.
8139too Fast Ethernet driver 0.9.28
mii: no version magic, tainting kernel.
3c59x: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
eepro100: no version magic, tainting kernel.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
ni52: no version magic, tainting kernel.
ni52: Autoprobing not allowed for modules.
ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'
mii: no version magic, tainting kernel.
8139cp: no version magic, tainting kernel.
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
eth16i: no version magic, tainting kernel.
eth16i.c: Presently autoprobing (not recommended) for a single card.
eth16i.c No Eth16i card found (i/o = 0x0).
mii: no version magic, tainting kernel.
ipg: no version magic, tainting kernel.
xircom_cb: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
winbond_840: no version magic, tainting kernel.
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@xxxxxxxxx>
http://www.scyld.com/network/drivers.html
de4x5: no version magic, tainting kernel.
de2104x: no version magic, tainting kernel.
de2104x PCI Ethernet driver v0.7 (Mar 17, 2004)
dmfe: no version magic, tainting kernel.
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
uli526x: no version magic, tainting kernel.
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
tulip: no version magic, tainting kernel.
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
mii: no version magic, tainting kernel.
hamachi: no version magic, tainting kernel.
hamachi.c:v2.1 Sept 11, 2006 Written by Donald Becker
Some modifications by Eric kasten <kasten@xxxxxxxxxxxx>
Further modifications by Keith Underwood <keithu@xxxxxxxxxxxxxxxx>
via_velocity: no version magic, tainting kernel.
82596: no version magic, tainting kernel.
ns83820: no version magic, tainting kernel.
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
mii: no version magic, tainting kernel.
amd8111e: no version magic, tainting kernel.
netxen_nic: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
8139too: no version magic, tainting kernel.
8139too Fast Ethernet driver 0.9.28
lance: no version magic, tainting kernel.
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
mii: no version magic, tainting kernel.
via_rhine: no version magic, tainting kernel.
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
igb: no version magic, tainting kernel.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
niu: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
3c503: no version magic, tainting kernel.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
ewrk3: no version magic, tainting kernel.
olympic: no version magic, tainting kernel.
lanstreamer: no version magic, tainting kernel.
smctr: no version magic, tainting kernel.
smctr.c: v1.4 7/12/00 by jschlst@xxxxxxxxx
3c359: no version magic, tainting kernel.
ibmtr: no version magic, tainting kernel.
ibmtr: register_netdev() returned non-zero.
mii: no version magic, tainting kernel.
eepro100: no version magic, tainting kernel.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
sky2: no version magic, tainting kernel.
skge: no version magic, tainting kernel.
e1000: no version magic, tainting kernel.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: no version magic, tainting kernel.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ipw2100: no version magic, tainting kernel.
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
hostap: no version magic, tainting kernel.
hostap_cs: no version magic, tainting kernel.
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
hostap: no version magic, tainting kernel.
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
hostap: no version magic, tainting kernel.
hostap_pci: no version magic, tainting kernel.
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
hostap: no version magic, tainting kernel.
hostap_plx: no version magic, tainting kernel.
ieee80211_crypt: unregistered algorithm 'NULL'
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
spectrum_cs: no version magic, tainting kernel.
spectrum_cs 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, et al)
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
rtl8180: no version magic, tainting kernel.
prism54: no version magic, tainting kernel.
Loaded prism54 driver, version 1.2
Unloaded prism54 driver
atmel: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
ssb: no version magic, tainting kernel.
b43: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
zd1211rw: no version magic, tainting kernel.
usbcore: registered new interface driver zd1211rw
usbcore: deregistering interface driver zd1211rw
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: no version magic, tainting kernel.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ipw2200: no version magic, tainting kernel.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ieee80211_crypt: unregistered algorithm 'NULL'
netwave_cs: no version magic, tainting kernel.
atmel: no version magic, tainting kernel.
atmel_cs: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
cdc_ether: no version magic, tainting kernel.
usbcore: registered new interface driver cdc_ether
rndis_host: no version magic, tainting kernel.
usbcore: registered new interface driver rndis_host
rndis_wlan: no version magic, tainting kernel.
usbcore: registered new interface driver rndis_wlan
usbcore: deregistering interface driver rndis_wlan
usbcore: deregistering interface driver rndis_host
usbcore: deregistering interface driver cdc_ether
airo: no version magic, tainting kernel.
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
airo_cs: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
ath5k: no version magic, tainting kernel.
PCI: Setting latency timer of device 0000:03:00.0 to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
ath5k phy0: failed to resume the MAC Chip
ath5k_pci: probe of 0000:03:00.0 failed with error -5
mac80211: no version magic, tainting kernel.
iwl3945: no version magic, tainting kernel.
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23k
iwl3945: Copyright(c) 2003-2007 Intel Corporation
mac80211: no version magic, tainting kernel.
iwl4965: no version magic, tainting kernel.
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
mac80211: no version magic, tainting kernel.
p54common: no version magic, tainting kernel.
p54usb: no version magic, tainting kernel.
usbcore: registered new interface driver prism54usb
usbcore: deregistering interface driver prism54usb
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
orinoco_plx: no version magic, tainting kernel.
orinoco_plx 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Daniel Barlow <dan@xxxxxxxxxx>)
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
orinoco_cs: no version magic, tainting kernel.
orinoco_cs 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
mac80211: no version magic, tainting kernel.
p54common: no version magic, tainting kernel.
p54pci: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
p54common: no version magic, tainting kernel.
hermes: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
ssb: no version magic, tainting kernel.
b43legacy: no version magic, tainting kernel.
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
orinoco_pci: no version magic, tainting kernel.
orinoco_pci 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> & Jean Tourrilhes <jt@xxxxxxxxxx>)
atmel: no version magic, tainting kernel.
atmel_pci: no version magic, tainting kernel.
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
adm8211: no version magic, tainting kernel.
wl3501_cs: no version magic, tainting kernel.
arlan: no version magic, tainting kernel.
arlan: No Arlan devices found
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
rtl8187: no version magic, tainting kernel.
usbcore: registered new interface driver rtl8187
usbcore: deregistering interface driver rtl8187
zd1201: no version magic, tainting kernel.
usbcore: registered new interface driver zd1201
usbcore: deregistering interface driver zd1201
wavelan: no version magic, tainting kernel.
WaveLAN init_module(): doing device probing (bad !)
Specify base addresses while loading module to correct the problem
WaveLAN init_module(): no device found
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: no version magic, tainting kernel.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
libertas: no version magic, tainting kernel.
usb8xxx: no version magic, tainting kernel.
usbcore: registered new interface driver usb8xxx
usbcore: deregistering interface driver usb8xxx
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: no version magic, tainting kernel.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
libertas: no version magic, tainting kernel.
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: no version magic, tainting kernel.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: no version magic, tainting kernel.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ieee80211softmac: no version magic, tainting kernel.
bcm43xx: no version magic, tainting kernel.
bcm43xx driver
ieee80211_crypt: unregistered algorithm 'NULL'
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
orinoco_tmd: no version magic, tainting kernel.
orinoco_tmd 0.15 (Joerg Dorchain <joerg@xxxxxxxxxxxx>)
airo: no version magic, tainting kernel.
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
wavelan_cs: no version magic, tainting kernel.
hermes: no version magic, tainting kernel.
orinoco: no version magic, tainting kernel.
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
orinoco_nortel: no version magic, tainting kernel.
orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@xxxxxxxxxxx>)
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00pci: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00usb: no version magic, tainting kernel.
rt73usb: no version magic, tainting kernel.
usbcore: registered new interface driver rt73usb
usbcore: deregistering interface driver rt73usb
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00pci: no version magic, tainting kernel.
rt2400pci: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00usb: no version magic, tainting kernel.
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00pci: no version magic, tainting kernel.
rt61pci: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00usb: no version magic, tainting kernel.
rt2500usb: no version magic, tainting kernel.
usbcore: registered new interface driver rt2500usb
usbcore: deregistering interface driver rt2500usb
eeprom_93cx6: no version magic, tainting kernel.
mac80211: no version magic, tainting kernel.
crc_itu_t: no version magic, tainting kernel.
input_polldev: no version magic, tainting kernel.
rfkill: no version magic, tainting kernel.
rt2x00lib: no version magic, tainting kernel.
rt2x00pci: no version magic, tainting kernel.
rt2500pci: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
ssb: no version magic, tainting kernel.
b44: no version magic, tainting kernel.
natsemi: no version magic, tainting kernel.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <becker@xxxxxxxxx>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
seeq8005: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
sundance: no version magic, tainting kernel.
sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
8390: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
pcnet32: no version magic, tainting kernel.
pcnet32.c:v1.34 14.Aug.2007 tsbogend@xxxxxxxxxxxxxxxx
cs89x0: no version magic, tainting kernel.
cs89x0.c: Module autoprobing not allowed.
cs89x0.c: Append io=0xNNN
eepro: no version magic, tainting kernel.
eepro_init_module: Probe is very dangerous in ISA boards!
eepro_init_module: Please add "autodetect=1" to force probe
bnx2x: no version magic, tainting kernel.
3c589_cs: no version magic, tainting kernel.
fmvj18x_cs: no version magic, tainting kernel.
nmclan_cs: no version magic, tainting kernel.
axnet_cs: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
pcnet_cs: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
smc91c92_cs: no version magic, tainting kernel.
xirc2ps_cs: no version magic, tainting kernel.
ibmtr_cs: no version magic, tainting kernel.
3c574_cs: no version magic, tainting kernel.
atp: no version magic, tainting kernel.
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@xxxxxxxxx>
depca: no version magic, tainting kernel.
hp100: no version magic, tainting kernel.
3c501: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
smc_ultra: no version magic, tainting kernel.
smc-ultra.c: Presently autoprobing (not recommended) for a single card.
smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
sc92031: no version magic, tainting kernel.
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
3c515: no version magic, tainting kernel.
3c515.c:v0.99t-ac 28-Oct-2002 becker@xxxxxxxxx and others
s2io: no version magic, tainting kernel.
tehuti: no version magic, tainting kernel.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
3c509: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
3c59x: no version magic, tainting kernel.
tg3: no version magic, tainting kernel.
at1700: no version magic, tainting kernel.
3c505: no version magic, tainting kernel.
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
slhc: no version magic, tainting kernel.
ppp_generic: no version magic, tainting kernel.
PPP generic driver version 2.4.2
8390: no version magic, tainting kernel.
e2100: no version magic, tainting kernel.
e2100.c: Presently autoprobing (not recommended) for a single card.
e2100.c: No E2100 card found (i/o = 0x0).
de600: no version magic, tainting kernel.
eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378.
bnx2: no version magic, tainting kernel.
sungem_phy: no version magic, tainting kernel.
smc9194: no version magic, tainting kernel.
SMC9194: You shouldn't use auto-probing with insmod!
mii: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
hp_plus: no version magic, tainting kernel.
hp-plus.c: Presently autoprobing (not recommended) for a single card.
hp-plus.c: No HP-Plus card found (i/o = 0x0).
sungem_phy: no version magic, tainting kernel.
sungem: no version magic, tainting kernel.
inet_lro: no version magic, tainting kernel.
myri10ge: no version magic, tainting kernel.
myri10ge: Version 1.3.2-1.287
ni65: no version magic, tainting kernel.
cxgb3: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
starfire: no version magic, tainting kernel.
starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@xxxxxxxxx>
(unofficial 2.2/2.4 kernel port, version 2.0, June 27, 2006)
starfire: polling (NAPI) disabled
8390: no version magic, tainting kernel.
ne: no version magic, tainting kernel.
ne.c: You must supply "io=0xNNN" value(s) for ISA cards.
eexpress: no version magic, tainting kernel.
eexpress.c: Module autoprobe not recommended, give io=xx.
eexpress.c: Failed to register card at 0x0.
mii: no version magic, tainting kernel.
epic100: no version magic, tainting kernel.
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@xxxxxxxxx>
(unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006)
qla3xxx: no version magic, tainting kernel.
sk98lin: no version magic, tainting kernel.
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
mii: no version magic, tainting kernel.
e100: no version magic, tainting kernel.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
sunhme: no version magic, tainting kernel.
tlan: no version magic, tainting kernel.
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
mii: no version magic, tainting kernel.
sis190: no version magic, tainting kernel.
slhc: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
wd: no version magic, tainting kernel.
wd.c: Presently autoprobing (not recommended) for a single card.
wd.c: No wd80x3 card found (i/o = 0x0).
typhoon: no version magic, tainting kernel.
forcedeth: no version magic, tainting kernel.
de620: no version magic, tainting kernel.
D-Link DE-620 pocket adapter not identified in the printer port
mii: no version magic, tainting kernel.
sis900: no version magic, tainting kernel.
sis900.c: v1.08.10 Apr. 2 2006
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
cdc_ether: no version magic, tainting kernel.
usbcore: registered new interface driver cdc_ether
rndis_host: no version magic, tainting kernel.
usbcore: registered new interface driver rndis_host
usbcore: deregistering interface driver rndis_host
usbcore: deregistering interface driver cdc_ether
kaweth: no version magic, tainting kernel.
/usr/src/linux-2.6.25-rc1/drivers/net/usb/kaweth.c: Driver loading
usbcore: registered new interface driver kaweth
usbcore: deregistering interface driver kaweth
mii: no version magic, tainting kernel.
pegasus: no version magic, tainting kernel.
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: deregistering interface driver pegasus
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
plusb: no version magic, tainting kernel.
usbcore: registered new interface driver plusb
usbcore: deregistering interface driver plusb
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
cdc_ether: no version magic, tainting kernel.
usbcore: registered new interface driver cdc_ether
zaurus: no version magic, tainting kernel.
usbcore: registered new interface driver zaurus
usbcore: deregistering interface driver zaurus
usbcore: deregistering interface driver cdc_ether
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
asix: no version magic, tainting kernel.
usbcore: registered new interface driver asix
usbcore: deregistering interface driver asix
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
net1080: no version magic, tainting kernel.
usbcore: registered new interface driver net1080
usbcore: deregistering interface driver net1080
rtl8150: no version magic, tainting kernel.
/usr/src/linux-2.6.25-rc1/drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
usbcore: deregistering interface driver rtl8150
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
cdc_subset: no version magic, tainting kernel.
usbcore: registered new interface driver cdc_subset
usbcore: deregistering interface driver cdc_subset
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
gl620a: no version magic, tainting kernel.
usbcore: registered new interface driver gl620a
usbcore: deregistering interface driver gl620a
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
cdc_ether: no version magic, tainting kernel.
usbcore: registered new interface driver cdc_ether
usbcore: deregistering interface driver cdc_ether
mii: no version magic, tainting kernel.
usbnet: no version magic, tainting kernel.
dl2k: no version magic, tainting kernel.
ixgbe: no version magic, tainting kernel.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
lp486e: no version magic, tainting kernel.
eth%d: i82596 initialization timed out
ixgb: no version magic, tainting kernel.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
r8169: no version magic, tainting kernel.
cxgb: no version magic, tainting kernel.
mii: no version magic, tainting kernel.
fealnx: no version magic, tainting kernel.
fealnx.c:v2.52 Sep-11-2006
mii: no version magic, tainting kernel.
r6040: no version magic, tainting kernel.
3c507: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
hp: no version magic, tainting kernel.
hp.c: Presently autoprobing (not recommended) for a single card.
hp.c: No HP card found (i/o = 0x0).
acenic: no version magic, tainting kernel.
znet: no version magic, tainting kernel.
8390: no version magic, tainting kernel.
ne2k_pci: no version magic, tainting kernel.
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Initializing USB Mass Storage driver...
usb-storage 5-2:1.0: usb_probe_interface
usb-storage 5-2:1.0: usb_probe_interface - got id
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 3:0:0:0: Direct-Access Ativa U3 smart 512MB 6.50 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sda] 984063 512-byte hardware sectors (504 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] 984063 512-byte hardware sectors (504 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 3:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 3:0:0:0: [sda] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
ReiserFS: sda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda1
VFS: Can't find ext3 filesystem on dev sda1.
cramfs: wrong magic
CPU0
0: 90 IO-APIC-edge timer
1: 33 IO-APIC-edge i8042
2: 0 XT-PIC-XT cascade
10: 0 IO-APIC-edge ahci, uhci_hcd:usb5
11: 0 IH-APIC-edge ehci_hcd:usb1, ehci_hcd:usb2, uhci_hcd:usb3,uhci_hcd:usb4, uhci_hcd:usb6, uhci_hcd:usb7
12: 2332 IO-APIC-edge i8042
14: 152 IO-APIC-edge ide0
NMI: 0 Non-maskable interrupts
LOC: 95075 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
CPU0
0: 90 IO-APIC-edge timer
1: 39 IO-APIC-edge i8042
2: 0 XT-PIC-XT cascade
10: 0 IO-APIC-edge ahci, uhci_hcd:usb5
11: 0 IH-APIC-edge ehci_hcd:usb1, ehci_hcd:usb2, uhci_hcd:usb3,uhci_hcd:usb4, uhci_hcd:usb6, uhci_hcd:usb7
12: 2332 IO-APIC-edge i8042
14: 152 IO-APIC-edge ide0
NMI: 0 Non-maskable interrupts
LOC: 97683 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0

Next message: Torsten Kaiser: "Re: Linux 2.6.25-rc2"
Previous message: Cyrill Gorcunov: "Re: [PATCH 2/3] sched: trivial sparse warning in sched.c"
In reply to: Alan Stern: "Re: USB regression (and other failures) in 2.6.2[45]*"
Next in thread: Alan Stern: "Re: USB regression (and other failures) in 2.6.2[45]*"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]